Chapter 11 Disposal; Overview Of Materials Used - Thermo Scientific Heratherm IMH 60 Operating Instructions Manual

Disposal

Overview of Materials Used

Component
Thermal insulation components
Printed circuit boards
Plastic components, general
Exterior housing
Device rear panel
Outer door
Door inner panel
Control panel and display window
protective foil
Heater
Thermo Scientific
The incubator may have been used for treating and processing
infectious substances, which may have caused contamination of the
incubator and its components.
Prior to disposal, it is therefore mandatory that all incubator
components be properly decontaminated.
Clean the incubator components thoroughly, then disinfect or
decontaminate them (depending on application).
Attach a declaration of decontamination with details on
decontamination activities performed to the items that are to be
disposed of.
Contamination hazard
Material
Glass wool
Coated electrical components contain
various plastics materials. Components
mounted on circuit boards containing
epoxy resin bonder.
see material labelling
Galvanized steel sheet, painted
Galvanized steel sheet
Galvanized steel sheet, painted, + stain-
less steel (optional)
Stainless steel
1.4301
Polyethylene
Silicone-sheathed resistance heater
wires, stainless-steel-jacketed resistance
heater wires with the IMH-S model
11
Heratherm 11-1