Danfoss VLT AutomationDrive FC 300 Design Manual page 91

How to Order
Description Pos Possible choices
C0/ E0 options 33- CX: No option
34 C4: MCO 305, Programmable Motion
Controller
BK: MCB 101 General purpose I/O in E0
BZ: MCB 108 Safety PLC Interface in E0
C1 options/ 35 X: No option
A/B in C R: MCB 113 Ext. Relay Card
Option Z: MCA 140 Modbus RTU OEM option
Adaptor E: MCF 106 A/B in C Option Adaptor
C option 36- XX: Standard controller
software/E1 37 10: MCO 350 Synchronizing control
options 11: MCO 351 Positioning control
12: MCO 352 Center winder
AN: MCA 121 Ethernet IP in E1
BK: MCB 101 General purpose I/O in E1
BZ: MCB 108 Safety PLC Interface in E1
D options 38- DX: No option
39 D0: MCB 107 Ext. 24V DC back-up
Table 5.4 Ordering Type Code, Options
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-21462-Danfoss-131B8966-VLT-Automation-VT-Drive-VFD-FC301-230V-5-HP.aspx
®
VLT AutomationDrive FC 300 Design Guide, 0.25-75 kW
®
MG33BE02 - VLT is a registered Danfoss trademark
5 5
89