Introduction; About This Guide; About The Nav System - Extron electronics NAV E 511 User Manual

Introduction

AVERTISSEMENT : L'appareil émet une lumière invisible (équipement de classe 1) en
This section contains the following topics:
•
•
•

About this Guide

This guide contains installation, configuration, and operating information for the Extron
NAV E 511 Encoder, which streams HDMI video and audio over a managed 1G IP network.
The encoder also supports USB and Ethernet extension.
NOTE: In this guide, NAV encoder and decoders collectively are referred to as
Two versions of encoder are documented in this guide. They are categorized by the
type of fiber optic cable, multimode or singlemode, which defines the effective range of
transmission:
•
•

About the NAV System

The Extron NAV decoders and one or more compatible encoders form an AV distribution
and switching matrix on an Internet Group Management Protocol (IGMP) Managed IP
Network. The encoders are configured for low latency multicast streaming. The decoders
are configured to join the assigned multicast group.
WARNING: This unit outputs continuous invisible light (Class 1 rated), which may
be harmful to the eyes; use with caution.
• Do not look into the rear panel fiber optic cable connectors or into the fiber optic
cables themselves.
• For additional safety, plug the attached dust caps into the optical transceivers when
the fiber cable is unplugged.
continu, à utiliser avec précaution.
• Ne regardez pas dans les connecteurs de câble fibre optique sur le panneau arrière
ou dans les câbles fibre optique eux-mêmes.
• Pour une sécurité renforcée, associez les bouchons anti-poussière à l'ensemble
émetteur/récepteur optique lorsque le câble fibre optique est débranché.
About this Guide
About the NAV System
Features
"endpoints."
Multimode encoder — Long distance, up to 550 m (1804 feet)
Singlemode encoder — Very long distance, up to 10 km (6.25 miles)
NAV E 511 Encoder • Introduction 1