Table of Contents
Advertisement
Introduction
This section gives an overview of the user guide and describes the SMD 101 and its
features. Topics that are covered include:
•
•
•
About this Guide
This guide contains installation, configuration, and operating information for the SMD 101.
In this guide:
•
•
•
About the SMD 101
The SMD 101 is a compact, high performance H.264 decoder used in applications that
require live AV streaming or file playback from files located on shared network storage
devices. The SMD 101 can decode and display one SD or HD stream and output a single
HDMI signal supporting resolutions up to 1920x1200 (60 fps, progressive). The video output
can be scaled and its aspect ratio modified. The Extron SMD 101 is compatible with content
from all Extron H.264 streaming products including the SME 100 and SMP series products.
The SMD 101 can be controlled using IR, and from the RS-232 and Ethernet ports. Ethernet
to RS-232 pass-through for display control is possible.
The SMD 101 decodes H.264/MPEG-4 AVC streams or clips and outputs HDMI video with
embedded or analog audio for display on any HDMI compatible device (see
next page).
About this Guide
About the SMD 101
Features
Codec or H.264 refers to the H.264/ MPEG-4 Part 10 AVC codec.
Stream can refer to audio, video, or both that is received by the SMD 101 and
constantly decoded for display.
Unless otherwise noted, web pages and pages refer to the embedded web-based
configuration software of the SMD 101.
figure 1
on the
SMD 101 • Introduction
1
Advertisement
Table of Contents
