Table of Contents
Advertisement
Introduction
This section gives an overview of the Extron DVC RGB-HD A Digital Video Converter. Topics
include:
•
•
•
•
About this Guide
This guide provides information for experienced installers on how to install, configure, and
operate the DVC RGB-HD A converter.
In this guide, the terms "DVC," "DVC RGB-HD A," and "converter" are used interchangeably
to refer to the DVC RGB-HD A converter.
About the DVC RGB-HD A Converter
The Extron DVC RGB-HD A is a one VGA input, one HDMI output converter that digitizes
analog RGBHV video to HDMI, with analog stereo audio embedding. A USB port allows
for system configuration and firmware updates using Extron Simple Instruction Set (SIS)
commands or PCS Product Configuration Software. The DVC RGB-HD A allows the
adaptation or integration of legacy VGA products into an all-digital audio-video system.
Features
The DVC RGB-HD A provides the following features:
•
•
•
•
•
•
•
About this Guide
About the DVC RGB-HD A Converter
Features
Application Diagram
Conversion of analog RGBHV to HDMI — Adapts analog computer video for use in
digital video systems.
Analog stereo audio embedding — Converts analog audio signals to digital HDMI
audio.
Input resolutions — Accepts computer video resolutions from 640x480 up to 1080p
@ 60 Hz and 1920x1200 @ 60 Hz with reduced blanking.
EDID Minder — EDID Minder automatically manages EDID communication between
connected devices and ensures that all sources power up output content for display
properly and reliably.
Automatic output format selection — By default, outputs the signal as HDMI format
when input audio is present, or as DVI when no input audio is detected. (You can
change the output selection manually using SIS commands.)
Status LED — A front panel LED provides power and signal status.
Configuration port — A rear panel USB port enables system configuration via SIS
commands or the PCS Configuration Software.
DVC RGB-HD A • Introduction
1
Advertisement
Table of Contents
