Siemens SIMOTION D410 Commissioning Manual page 84

Commissioning (software)
5.2 Configuring the system in offline mode
3. In the "Power Unit" dialog, use the order number to select your power unit from the list.
4. In the "Power unit supplementary data", select the component added to the power unit. The
84
Figure 5-3 Selecting a power unit
selection of the component depends on the construction type:
– D410 DP with D410 PN: The SIMOTION D410 snapped directly onto the PM340 power
module
– CUA31 or CUA32: The CUA3x snapped directly onto the PM340. The D410 is mounted
individually on a mounting plate. The D410 is connected to the CUA3x using a DRIVE-
CLiQ cable.
Figure 5-4 Selecting the mounting type
SIMOTION D410
Commissioning Manual, 04/2014