Siemens SIMOTION D410 Commissioning Manual page 201

Meaning
Bus error
● PROFIBUS master: At least 1 slave is missing
● PROFIBUS slave: No parameter assignment master available
● PROFINET: Failure of a connected I/O device; at least one of the
assigned I/O devices cannot be addressed; faulty or missing
configuration data.
Priority: 2
1)
Underlicensing of technology/option objects
Priority: 3
1)
Upgrade/downgrade operation running.
The upgrade/downgrade operation has completed
(power OFF/ON of the upgraded/downgraded devices is necessary)
Transition from STOP/STOPU to RUN
STOP/STOPU
RUN
Transition
● from RUN to STOP/STOPU
● STOP to STOPU
● STOPU to STOP
Memory reset requested by SIMOTION D410, or by means of mode
switch.
Memory reset in progress
Memory reset completed
Firmware download to the integrated PROFINET interface is busy
Firmware download to the integrated PROFINET interface is completed
SIMOTION cannot enter the RUN and Online mode
Upgrading SIMOTION devices (device update tool)
Upgrade/downgrade running
Upgrade/downgrade completed with error
Upgrade/downgrade completed without error
Backing up diagnostic data and non-volatile data
Backing up diagnostic data and non-volatile data (backup running)
Backing up diagnostic data and non-volatile data (backup completed)
SIMOTION D410
Commissioning Manual, 04/2014
7.1 Diagnostics by means of LED displays
RDY RUN/STOP
x x
x x
0.5/1 x
(yellow)
2/1 x
(yellow)
x 2/1
(green)
x 1
(yellow)
x 1
(green)
x 2/1
(yellow)
x 0.5/1
(yellow)
x 0
x 1
(yellow)
0 x
x x
x x
x x
x x
x Λ
(yellow)
x Λ
(green)
Diagnostics data
OUT > 5V SF/BF:
x 2/1
(red)
x 0.5/1
(red)
x x
x x
x x
x x
x x
x x
x x
x 0
x x
x 2/1
(yellow)
x Λ
(red)
x 0.5/1
(green)
x Λ
(red)
x 0
2)
x x
x x
201