Shut down the system
Illustration
[8] Shut down the system
Procedure
1. Touch [System] -> [Setup] -> [Shut down system].
The control panel displays the message [Are you sure you want to shut down?].
2. Touch [Yes].
A message indicates when the shut down will begin.
When the shut down is complete, the control panel will be off.
3. To shut down the system completely, switch the On/Off button of each connected finishing unit
into the "O" position.
Océ VarioPrint 6000 line
Shut down the system
Chapter 4 - Start the print system
47