Table of Contents
Advertisement
TRANSMISSION - NGC
P0760-OD SOLENOID CIRCUIT —
TEST
10
Using the schematics as a guide, inspect the wiring and connectors. Repair as
necessary. Pay particular attention to all power and ground circuits.
If there are no possible causes remaining, view repair.
Repair
11
The conditions necessary to set the DTC are not present at this time.
Using the schematics as a guide, inspect the wiring and connectors specific to this
circuit.
Wiggle the wiring and connectors while checking for shorted and open circuits.
With the DRBIII , check the EATX EVENT DATA to help identify the conditions in
which the DTC was set.
Were there any problems found?
Yes → Repair as necessary.
→ Test Complete.
No
ACTION
Replace the Powertrain Control Module per the Service Informa-
tion. WITH THE DRBIII
REPROGRAM PINION FACTOR.
Perform 41TE (NGC) TRANSMISSION VERIFICATION TEST -
VER 1.
Perform 41TE (NGC) TRANSMISSION VERIFICATION TEST -
VER 1.
Continued
PERFORM QUICK LEARN AND
84
APPLICABILITY
All
All
Advertisement
Table of Contents
