Table of Contents
Advertisement
P0713-TRANSMISSION TEMPERATURE SENSOR HIGH —
TEST
9
The conditions necessary to set this DTC are not present at this time.
Using the schematics as a guide, inspect the wiring and connectors specific to this
circuit.
Wiggle the wires while checking for shorted and open circuits.
With the DRBIII , check the EATX EVENT DATA to help identify the conditions in
which the DTC was set.
Were there any problems found?
Yes → Repair as necessary.
→ Test Complete.
No
ACTION
Perform 41TE (NGC) TRANSMISSION VERIFICATION TEST -
VER 1.
TRANSMISSION - NGC
45
Continued
APPLICABILITY
All
Advertisement
Table of Contents
