Table of Contents
Advertisement
3 - 38
REAR DRIVELINE MODULE
REAR DRIVELINE MODULE (Continued)
(6) Install washer to overrunning clutch (Fig. 26).
Fig. 26 Flange Bottoming Washer
1 - WASHER
(7) Install o-ring to overrunning clutch (Fig. 27)
(Fig. 28).
Fig. 27 Input Flange O-ring Seal
1 - O-RING
(8) Align overrunning clutch ground tab to 3
o'clock position (Fig. 29).
Fig. 28 Proper O-ring and Washer Installation
1 - O-RING
2 - WASHER
Fig. 29 Overrunning Clutch Orientation
1 - OVERRUNNING CLUTCH ASSEMBLY
2 - TAB AT 3 O'CLOCK
(9) Install overrunning clutch housing into posi-
tion, making sure ground tab engages with notch in
housing (Fig. 30).
CS
Advertisement
Table of Contents
