Table of Contents
Advertisement
3 - 52
REAR DRIVELINE MODULE
INPUT FLANGE SEAL (Continued)
(3) Install flange washer and nut (Fig. 66) (Fig.
67).
Fig. 66 Input Flange Washer
1 - WASHER
Fig. 67 Input Flange Nut Removal/Installation
1 - NUT
(4) Using tool 6958, torque flange nut to 135 N·m
(100 ft. lbs.) (Fig. 68).
Fig. 68 Input Flange Nut
1 - INPUT FLANGE
2 - TOOL 6958
(5) Install propeller shaft. (Refer to 3 - DIFFER-
ENTIAL & DRIVELINE/PROPELLER SHAFT -
INSTALLATION)
(6) Lower vehicle.
CS
Advertisement
Table of Contents
