Table of Contents
Advertisement
8J - 10
INSTRUMENT CLUSTER
INSTRUMENT PANEL SWITCH POD (Continued)
switch is OK. If no continuity, replace complete
instrument panel switch pod.
REMOVAL
(1) Remove the cluster bezel (Refer to 23 - BODY/
INSTRUMENT PANEL/CLUSTER BEZEL - REMOV-
AL).
(2) Remove the three retaining screws holding the
switch pod to the cluster bezel (Fig. 22).
INSTALLATION
(1) Install the three retaining screws holding the
switch pod to the cluster bezel.
(2) Install the cluster bezel (Refer to 23 - BODY/
INSTRUMENT
PANEL/CLUSTER
INSTALLATION).
WARNING: DO NOT CONNECT THE BATTERY NEG-
ATIVE CABLE. (Refer to 8 - ELECTRICAL/RE-
STRAINTS - DIAGNOSIS AND TESTING - AIRBAG
SYSTEM) FIRST.
BEZEL
-
1 - INSTRUMENT PANEL SWITCH POD ILLUMINATION
(3) Verify vehicle and system operation.
Fig. 22 INSTRUMENT PANEL
SWITCH POD - REMOVE/INSTALL
CS
Advertisement
Table of Contents
