Engine, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Vehicles with manual
transmission
Repair Manual, 5 Spd. Manual
Transmission 02A, Repair Group 30
Remove hydraulic clutch slave cylinder
Repair Manual, 5 Spd. Manual
Transmission 02A, Repair Group 34;
Remove transmission operating cables
with support bracket from transmission
- Attach lifting tackle 2024 A as follows
and lift engine and trans assembly
slightly using workshop crane:
Vibration damper end: 4th hole in
hook at position 1
Flywheel end: 4th hole in hook at
position 6
WARNING!
Hooks and locating pins must be
secured with locking pins.
Notes:
The positions marked 1 through 4
on the bar must be toward the
vibration damper.
The holes in the hooks are counted
up from the hook.
Page 5 of 16
10-5
5/12/2004