Unpacking - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
AFC-3000 Automated Fraction Collector
• Observe the same general electrostatic discharge precautions as with any other integrated
circuit electronic devices. Low-humidity environments, especially when combined with
static-generating materials, require maximum care.
Important:
Important:
• Avoid using the AFC-3000 if strong electromagnetic interference, radio frequency
interference, or radioactivity is present. Interference fields can cause erratic operation of
the fraction collector. The fraction collector will not function properly if the level of
radioactivity is above background.

3.2 Unpacking

All electrical and mechanical components of the fraction collector are carefully tested
before the instrument is shipped from the factory. After unpacking, please inspect the
instrument for any signs of mechanical damage that might have occurred during transit.
Tips:
Important:
Important:
Page 24
Discharge static buildup and ground to the fraction collector base or
cabinet before performing any maintenance. Do not touch or
short-circuit bare contacts (for example, COM1 or auxiliary ports).
Déchargez accumulation d'électricité statique et mettez à la terre la
base et le cabinet du collecteur de fractions avant de procéder à tous
travaux d'entretien. Ne touchez ou court-circuitez pas des contacts
nus (par exemple, COM1 ou ports auxiliaires).
Immediately report any shipping damage to both, the incoming
carrier and Thermo Fisher Scientific. Shipping insurance will
compensate for the damage only if reported immediately.
Keep the original shipping container and packing material. They
provide excellent protection for the instrument in case of future
transit. The product warranty will not be honored if the fraction
collector is shipped in any other packaging.
Ship the unit only in the original shipping container and observe the
packing instructions. Shipping the unit in any other packaging
automatically voids the warranty. For more information, see the
warranty statement in the terms of sale.
Expédier l'unité uniquement dans le conteneur d'expédition original
et d'observer les instructions d'emballage. L'unité dans toute autre
emballage automatiquement d'expédition, la garantie en vides. Pour
plus d'informations, consultez la déclaration de garantie dans les
conditions de vente.
Operating Instructions