UltiMate 3000 Series:
AFC-3000 Automated Fraction Collector
To modify a program
1. Open an existing program.
Select and double-click the program you want to open.
—or—
On the File menu, select Open. In the dialog box, select Program on the Object of Type
list and select the program.
Fig. 24: Chromeleon program file (shown in the Commands view, here not connected to a timebase)
2. Change the settings in the program as desired and add the required AFC-3000
commands. A program example can be found in the appendix.
Click Commands to open the Commands View. The Commands View shows the entire
program, listing the control commands in chronological order. Edit the parameter of
interest or enter a new parameter.
Important: The rack configuration (Rack) and the collect mode (CollectMode)
Important: Ne changez pas la configuration du rack (Rack) et le mode de
3. To start the program, follow the steps below.
For more information on fraction collection, see the Chromeleon Help.
Page 56
must not be changed during the course of a program file.
collection (CollectMode) au cours d'un programme.
Operating Instructions