Technical Information - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

8 Technical Information

Tube capacity:
Tube change time:
Maximum tube height:
Maximum flow rate:
Carry-over volume:
Wetted parts:
Control:
GLP features:
Power requirements:
Emission sound pressure
level:
Environmental
conditions:
Dimensions (h × w × d):
Weight:
Technical information: August 2013
All technical specifications are subject to change without notice.
Operating Instructions
Depends on rack configuration;
standard configuration: 180 x 8 mL tubes (13 mm x 100 mm)
Typically 0.2 to 0.4 s, depending on collect mode and rack type
150 mm
150 mL/min
15 µL (standard), 1.3 µL (with optional low-flow kit)
ETFE, FFKM (Simriz®), PFA, PEEK (with standard and low-flow drop
former), stainless steel (with grounded drop former for normal-phase LC)
All functions software-controlled via RS-232 or USB; requires Chromeleon
Chromatography Management System
In Chromeleon:
All system parameters are recorded in the Chromeleon audit trail.
100–240 V, 47-63 Hz AC 1.9 A with an output of DC 24V, maximum 3.33 A
Automatic voltage selection
< 70 dB(A), typically 62 dB(A)
Range of use:
Temperature:
Air humidity:
Overvoltage category:
Pollution degree:
43 x 34 x 46 cm (16.5 x 13.4 x 18.1 in.)
8 kg (17.7 lbs)
UltiMate 3000 Series:
AFC-3000 Automated Fraction Collector
Indoor use
10 to 35 °C (50 to 95 °F)
20-70% relative humidity, non-condensing
II
2
Page 71