Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 53

5. Change the display filter level if necessary. Right-click in the commands list and select
the filter level on the menu.
6. Verify that the fraction collector is connected to Chromeleon. If it is not connected,
execute the Connect command.
In addition to the fraction collector commands and parameters, the Commands dialog box
provides access to all commands and parameters available for all devices that are installed in
the selected timebase.
To open the AFC-3000 control panel
1. Open the Commands dialog box and connect the AFC-3000 to Chromeleon
(→ page 46).
2. On the View menu, click Default Panel Tabset or click the corresponding icon on the
toolbar , and then connect to the Chromeleon server.
Chromeleon creates centralized control panels, called panel tabsets, for all timebases
available on the Chromeleon server. A panel tabset provides control panels for the
individual instruments in a timbase and, in addition, one or more panels for performing
system-wide functions, for example, creating and running sequences. For more
information about panel tabsets, see the Chromeleon Help.
3. On the Panel Tabset for your timebase, click the AFC-3000 tab page (→ Fig. 17).
Operating Instructions
Fig. 16: Commands dialog box
UltiMate 3000 Series:
AFC-3000 Automated Fraction Collector
Page 47