Universal Fraction Tray, Racks And Tubes - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
AFC-3000 Automated Fraction Collector

2.6 Universal Fraction Tray, Racks and Tubes

The fraction collector supports a large variety of fraction collection racks, including most
of the Isco Foxy Jr./R1 and wellplate sampler racks. For information about how to install a
rack, see page 30.
The following rack types are supported:
Rack/Adapter for
21 tubes
24 tubes
40 tubes
60 tubes
90 tubes
60 tubes (Foxy Jr./R1)
72 tubes (Foxy Jr./R1)
36 vials (Foxy Jr./R1)
2 well plates (Foxy Jr./R1)
40 vials (WPS-3000)
22 vials (WPS-3000)
10 vials (WPS-3000)
4 well plates
In addition, up to six 250 mL Schott bottles (part no. 2270.0026) can be placed directly on
the universal drip tray.
To ensure correct installation of the Foxy racks, a set of positioning pins is available from
Thermo Fisher Scientific (part no. 6702.9006).
For details on rack installation and allowed combinations of fraction formats, see section
3.3.5, page 30.
Page 20
Tube Size
50 mL; 30 mm x 100 mm
A funnel rack (part no. 6702.1021) in conjunction with
this rack allows collecting fractions of unlimited
volumes into appropriate vessels.
30 mL; 24 mm x 100 mm
20 mL; 20 mm x 100 mm
14 mL; 16 mm x 100 mm
8 mL; 13 mm x 100 mm
1.5 mL
Mini tubes, 18 mm OD
Scintillation vials, 28 mm OD
Two 96 well plates
2 mL, 12 mm OD
In addition, a rack adapter (part no. 6702.0100) is
required. The vials should have an opening as large as
possible for unerring fractionation.
4 mL, 15 mm OD
In addition, a rack adapter (part no. 6702.0100) is
required.
10 mL, 22 mm OD
In addition, a rack adapter (part no. 6702.0100) is
required.
Four 96 well plates
Part No.
6702.0021
6702.0024
6702.0040
6702.0060
6702.0090
5701.2023
5701.2024
5701.2025
5701.2021
6820.4070
6820.4084
6820.4086
6702.0200
Operating Instructions