How To Read This Design Guide - Danfoss VLT AQUA Drive FC 202 Design Manual

How to Read this Design Gui...

1 How to Read this Design Guide

1.1.1 Copyright, Limitation of Liability and
Revision Rights
This publication contains information proprietary to
Danfoss. By accepting and using this manual, the user
agrees to use the information contained herein solely for
operating equipment from Danfoss or equipment from
other vendors if such equipment is intended for communi-
cation with Danfoss equipment over a serial
communication link. This publication is protected under
the Copyright laws of Denmark and most other countries.
Danfoss does not warrant that a software program
produced according to the guidelines provided in this
manual functions properly in every physical, hardware, or
software environment.
Although Danfoss has tested and reviewed the documen-
tation within this manual, Danfoss makes no warranty or
representation, neither expressed nor implied, with respect
to this documentation, including its quality, performance,
or fitness for a particular purpose.
In no event shall Danfoss be liable for direct, indirect,
special, incidental, or consequential damages arising out of
the use, or the inability to use information contained in
this manual, even if advised of the possibility of such
damages. In particular, Danfoss is not responsible for any
costs, including but not limited to costs incurred as a
result of lost profits or revenue, loss or damage of
equipment, loss of computer programs, loss of data, the
costs to substitute these losses, or any claims by third
parties.
Danfoss reserves the right to revise this publication at any
time and to change its contents without prior notice or
any obligation to notify former or present users of such
revisions or changes.
1.1.2 Available Literature
•
®
VLT AQUA Drive FC 202, 0.25-90 kW, Operating
Instructions provide the necessary information for
getting the frequency converter up and running.
•
®
VLT AQUA Drive FC 202, 110-400 kW, D frame
Operating Instructions provide installation,
startup, and basic information for the newest D-
frame models.
•
®
VLT AQUA Drive FC 202 High Power Operating
Instructions provide the necessary information for
MG20Z202
Design Guide
•
•
•
•
•
•
•
•
•
•
•
•
•
Danfoss technical literature is also available online at
www.danfoss.com/BusinessAreas/DrivesSolutions/Documen-
tations/Technical+Documentation.htm.
The following symbols are used in this document:
WARNING
Indicates a potentially hazardous situation which could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which could
result in minor or moderate injury. It can also be used to
alert against unsafe practices.
NOTICE
Indicates important information, including situations that
can result in damage to equipment or property.
Danfoss A/S © Rev. 06/2014 All rights reserved.
getting the HP frequency converter up and
running.
®
VLT AQUA Drive FC 202, 110-1400 kW, Design
Guide provides all technical information about
the frame D, E, and F frequency converter and
customer design and applications.
®
VLT AQUA Drive FC 202 Programming Guide
provides information on how to programme and
includes complete parameter descriptions.
®
VLT AQUA Drive FC 202 Profibus.
®
VLT AQUA Drive FC 202 DeviceNet.
Output Filters Design Guide.
®
VLT AQUA Drive FC 202 Cascade Controller.
Application Note: Submersible Pump Application
Application Note: Master/Follower Operation
Application
Application Note: Drive Closed Loop and Sleep
Mode
Instruction: Analog I/O Option MCB109
Instruction: Panel through mount kit
®
VLT Active Filter Operating Instruction.
®
VLT Frequency Converters Safe Torque Off
Operating Instructions
1 1
7