Software Version; Ce Labelling - Danfoss VLT AQUA Drive FC 202 Design Manual

Introduction
CAUTION
INTERNAL FAILURE HAZARD
2 2
An internal failure in the frequency converter can result
in serious injury, when the frequency converter is not
properly closed.
•
Ensure that all safety covers are in place and
securely fastened before applying power.
WARNING
UNINTENDED MOTOR ROTATION
WINDMILLING
Unintended rotation of permanent magnet motors can
result in serious injury or equipment damage.
•
Ensure that permanent magnet motors are
blocked to prevent unintended rotation.
2.1.1 Disposal Instruction
Table 2.2 Disposal Instruction

2.2 Software Version

2.2.1 Software Version and Approvals
This manual can be used with all VLT AQUA Drive frequency
converters with software version 1.95.
The software version number can be found in parameter 15–43.
Table 2.3 Software Version

2.3 CE Labelling

2.3.1 CE Conformity and Labelling
What is CE Conformity and Labelling?
The purpose of CE labelling is to avoid technical trade
obstacles within EFTA and the EU. The EU has introduced
the CE label as a simple way of showing whether a
product complies with the relevant EU directives. The CE
label says nothing about the specifications or quality of
12
Design Guide
Do not dispose of equipment containing
electrical components together with
domestic waste.
Collect it separately in accordance with
local and currently valid legislation.
®
VLT AQUA Drive FC 202
Danfoss A/S © Rev. 06/2014 All rights reserved.
the product. There are three EU directives that regulate
frequency converters:
The machinery directive (2006/42/EC)
Frequency converters with integrated safety function are
now falling under the Machinery Directive. Danfoss CE-
labels in accordance with the directive and issues a
declaration of conformity upon request. Frequency
converters without safety function do not fall under the
machinery directive. However, if a frequency converter is
supplied for use in a machine, we provide information on
safety aspects relating to the frequency converter.
The low-voltage directive (2006/95/EC)
Frequency converters must be CE labelled in accordance
with the low-voltage directive of January 1, 1997. The
directive applies to all electrical equipment and appliances
used in the 50–1000 V AC and the 75–1500 V DC voltage
ranges. Danfoss CE-labels in accordance with the directive
and issues a declaration of conformity upon request.
The EMC directive (2004/108/EC)
EMC is short for electromagnetic compatibility. The
presence of electromagnetic compatibility means that the
mutual interference between different components/
appliances does not affect the way the appliances work.
The EMC directive came into effect January 1, 1996.
Danfoss CE-labels in accordance with the directive and
issues a declaration of conformity upon request. To carry
out EMC-correct installation, see the instructions in this
Design Guide. Additionally, find specifications of which
standards the Danfoss products comply with. The filters
presented in the specifications are part of the product
range. Furthermore, Danfoss offers other types of
assistance to ensure optimum EMC result.
2.3.2 What Is Covered
The EU "Guidelines on the Application of Council Directive
2004/108/EC" outline three typical situations of using a
frequency converter. See the following list for EMC
coverage and CE labelling.
1. The frequency converter is sold directly to the
end consumer, for example, to a DIY market. The
end consumer is a layman who installs the
frequency converter for use with a household
appliance. For such applications, the frequency
converter must be CE labelled in accordance with
the EMC directive.
2. The frequency converter is sold for installation in
a plant designed by trade professionals. The
frequency converter and the finished plant do
not have to be CE labelled under the EMC
directive. However, the unit must comply with
the basic EMC requirements of the directive.
Compliance is ensured by using components,
MG20Z202