Danfoss VLT AQUA Drive FC 202 Design Manual page 128

How to Install
Terminal Locations - Options Cabinet with Circuit Breaker/Molded Case Switch (F3 and F4)
Take the following position of the terminals into consideration when designing the cable access.
5 5
1 Left Side
2 Front Side
Illustration 5.88 Terminal Locations - Options Cabinet with Circuit Breaker/Molded Case Switch. Gland Plate is 42 mm below .0 Level.
Power size
450 kW (480 V), 630-710 kW (690 V)
500-800 kW (480 V), 800-1000 kW (690 V)
Table 5.14 Dimension for Terminal
126
Design Guide
134.6 [5.30]
0.0 [0.00]
3
4
2
34.9
46.3
Danfoss A/S © Rev. 06/2014 All rights reserved.
532.9 [20.98]
436.9 [17.20]
1
0.0 [0.00]
44.4 [1.75]
244.4 [9.62]
Right Side
Ground bar
3 4
86.9 122.2
98.3 119.0
3 5
2 4
5
174.2
171.0
MG20Z202