Advertisement
Going back to the previous screen/going back to the standby screen
You can go back to the previous screen by pressing
Guide Display Area.
Ｃｌｏｃｋ ｓｅｔｔｉｎｇ
Ｄａｔｅ／ｔｉｍｅ
Ａｌａｒｍ
ＯＦＦ
Ａｕｔｏ ｐｗｒ．ｏｎ
ＯＦＦ
/
Ａｕｔｏ ｐｗｒ．ｏｆｆ
ＯＦＦ
ｒｅｔｕｒｎ
ｓｅｌｅｃｔ
Hint
• Press
when
appears in the Guide Display Area
If there arrives an incoming call while editing
If you receive a call while editing your [Address book]
incoming screen appears and you can answer the call. When you end the call, the screen returns to the
editing screen.
Hint
• The screen returns to the editing screen in the following cases other than when there arrives an incoming call.
• When a normal alarm is activated.
• When the Schedule Alarm is activated.
• When you receive mail/messages.
• If you answer an incoming call while editing and operate another function, the standby screen is resumed when
you end the call. The data being edited is automatically saved. But the previous editing screen returns if you
are editing mail.
• If the editing is canceled by the following reasons, the data being edited is automatically saved, too. Note that
you cannot save mail when it is being edited.
• When the power is turned off.
• When the power is turned off by [Auto pwr. off].
• When the other party disconnects the call you answer while you are editing.
• When the battery pack becomes empty.
• When there arrives another incoming call during the call you answer while you are editing.
• You can edit the automatically saved data again.
• When the data automatically saved is set to the Secret mode, you must enter PIN before you start editing
again.
Ｔｏｏｌ
Ｓｃｈｅｄｕｌｅ
Ｍｅｍｏ
/
Ｃａｌｃｕｌａｔｏｒ
7
Ｃｌｏｃｋ
Ｔｅｘｔ ｉｎｐｕｔ
ｒｅｔｕｒｎ
ｓｅｌｅｃｔ
電源
P.53
s
P.142
s
P.122
s
P.263, 274
P.143
when [return] appears in the
Ｔｏｏｌ
Ｓｃｈｅｄｕｌｅ
Ｍｅｍｏ
Ｃａｌｃｕｌａｔｏｒ
7
Ｃｌｏｃｋ
Ｔｅｘｔ ｉｎｐｕｔ
ｒｅｔｕｒｎ
ｓｅｌｅｃｔ
s
, you can go back to the previous screen.
s
or [Schedule]
P.90
P.120
s
Ｓ ｅ ｐ ２ ０ Ｔ ｈ ｕ
１ ２ ： ５ ９
ＰＭ
ｍａｉｌ
ｍｅｎｕ
ｉ−ｍｏｄｅ
s
then the
55
Advertisement
