Advertisement
4
Press
(
)
ｃｍｐｌｔ
The item to inquire is set.
<Connect>
Setting a wait time for connection to a site
You can set the Digital Mova so that the connection to the i-mode center is automatically
disconnected when the i-mode center is congested and data communication is difficult to
establish.
1
Press
(
ｉ−ｍｏｄｅ
and select [Settings] / [Common
setting] /[Connect]
2
Turn
to select a
wait time
60 second : The connection is automatically
disconnected when the waiting time
exceeds 60 seconds.
90 second : The connection is automatically
disconnected when the waiting time
exceeds 90 seconds.
No limit
: The connection is continued (But
the connection can be disconnected
due to such as poor reception of
radio waves).
<Host>
Setting the Host in i-mode
You can set the Host, to which i-mode is connected, as you like.
The Host number is set when you subscribe to i-mode, therefore, you do not need to set
in particular.
1
Press
(
ｉ−ｍｏｄｅ
and select [Settings] / [Common
setting] / [Host] / [Host selection]
Ｓｅｔｔｉｎｇｓ
▲
Ｓｉｇｎ．ｓｅｔｔｉｎｇ
ＯＦＦ
Qｕｏｔｅ ｍｓｇ． Ａｕｔｏ
Ａｔｔａｃｈ ＞ Ａｕｔｏ
Ｆｏｎｔ ｓｉｚｅ Ｏｒｉｇ
Ｉｍａｇｅ ｄａｔａ ＯＦＦ
Ｉｎｑｕｉｒｙ
) at the standby screen
Ｃｏｎｎｅｃｔ
６０ｓｅｃｏｎｄ
９０ｓｅｃｏｎｄ
Ｎｏ ｌｉｍｉｔ
ｃａｎｃｅｌ ｓｅｌｅｃｔ
) at the standby screen
Hint
• You can also set [Inquiry] from the i-mode top
menu [Settings] / [Mail/Msg] / [Inquiry].
3
Press
(
ｓｅｌｅｃｔ
[Connect] is set.
Check
• When [Connect] is set to [No limit], the status of
transmitting/receiving is maintained when it is
impossible to transmit/receive, until
is pressed to stop transmittng.
• Even if you set [Connect] to [No limit], data
communication may be automatically canceled if
you are out of the i-mode service area or receive
a call.
2
Enter your PIN
P.72
Default 60 sec.
)
Ｃｏｍｍｏｎ ｓｅｔｔｉｎｇ
Ｃｏｎｎｅｃｔ ９０ｓ
Ｈｏｓｔ
(
)
ｃａｎｃｅｌ
Default
(DoCoMo)
ドコモ
s
341
Advertisement
