Advertisement
Before Use
Attaching/removing the battery pack
Attachment
1
Depress the cleat (non-skid part) on the rear cover and slide toward the arrow, then
lift and remove the cover.
2
With the label facing upward, align the end faces of the battery pack with the Digital
Mova. Then, insert it in the direction of the arrow.
3
Align the rear cover with the groove and slide it toward the arrow until it is locked.
Cleat
Removal
1
Depress the cleat (non-skid part) on the rear cover and slide toward the arrow, then
lift and remove the cover.
2
Hold and lift the finger handle of the battery pack in the direction of the arrow. Then,
remove the battery pack.
Cleat
Check
• Before replacing the battery pack, be sure to turn the power of the Digital Mova off.
• Do not try to attach the battery pack forcibly. Doing so may damage the terminal of the Digital Mova.
• Excessive force may damage the rear cover.
• Attaching/detaching the rear cover in any other manner than described above may result in damaging the
cover.
26
1
1
2
Turn the label to face upward.
3
2
Finger handle
Advertisement
