Docomo FOMA SO702i Manual
  1. Manuals
  2. Brands
  3. Docomo Manuals
  4. Cell Phone
  5. FOMA SO702i
  6. Manual

Docomo FOMA SO702i Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Manual for
'06.5
Appendix/External Device Interface/
Easy Search/Contents/
Safety Precautions
Before Using the
FOMA Terminal
Placing/
Receiving Calls
Placing/Receiving
Videophone Calls
Phonebook
Sound/Display/
Light Settings
Security Settings
Camera
i-mode/
i-motion
Mail
i-αppli
i-Channel
Displaying/Editing/
Managing Data
Other Useful Functions
Network Services
Data Communication
Entering Text
Troubleshooting
Index/
Quick Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FOMA SO702i and is the answer not in the manual?

Questions and answers

Related Manuals for Docomo FOMA SO702i

Summary of Contents for Docomo FOMA SO702i

  • Page 1 Easy Search/Contents/ Safety Precautions Manual for Before Using the FOMA Terminal Placing/ Receiving Calls ’06.5 Placing/Receiving Videophone Calls Phonebook Sound/Display/ Light Settings Security Settings Camera i-mode/ i-motion Mail i-αppli i-Channel Displaying/Editing/ Managing Data Other Useful Functions Network Services Data Communication Entering Text Appendix/External Device Interface/ Troubleshooting...
  • Page 2 SSL. In the event that the user shall sustain damage or loss due to the use of SSL, neither DoCoMo nor the certifiers shall be responsible for any such damage or loss.

  • Page 3: Information On Using The Manual And How To Look Up In The Manual

    The default setting for each function is provided in the list of menus (P.278). ■Before Reading This Manual ● Please note that “FOMA SO702i” is called the “FOMA terminal” in this manual. ● This manual describes the functions that can be performed using the “Memory Stick Duo”. To use these functions, you need the optional “Memory Stick Duo”.

  • Page 4: Before Using

    A function, referred to as “Notify caller ID” here, can be searched in diverse ways as follows. Index (P.324) Search by a function or service name known to you or a function name to be displayed on the FOMA terminal’s display. Service numbers ....
  • Page 5 ■Typical layout of the operating instructions page The default settings at the Showing Your Phone Number on the Recipient’s Phone Section title time of purchase Default Not notify Chapter title When placing a call, your phone number can be shown in the display of the recipient’s An outline and objectives phone you are calling.

  • Page 6: Easy Search

    Easy Search You can search a function that you want to know or you consider useful to know from a listing sorted by purpose or by a function name. Useful Functions for a Call your phone number Sending or keeping it anonymous ... P.40 (Notify caller ID) hands-free Talking on the mobile phone ......

  • Page 7: Contents (P

    Useful Functions for Mail Deco-mail Sending ............P.183 (Compose and send Deco-mail) image Sending an ............P.187 (File attachment) up to five persons at a time Broadcasting mail ( ) ..P.205 (Mail list) Sorting automatically received mail ......P.202 (Sort inbox) signature Adding a to mail messages ......

  • Page 8: Table Of Contents

    Information on Using the Manual and How to Look up in the Manual ..1 Contents Easy Search ................4 Features of the FOMA SO702i ..........8 Making Full Use of SO702i ! ..........10 Safety Precautions (Observe Strictly) ........12 Handling Precautions ............
  • Page 9 i-mode/i-motion What is i-mode?, i-mode menu, Display sites, Change i-mode password, Internet connection, Bookmark, Screen Memo, Save image, Download, Phone To/Mail To/Web To/i-αppli To, i-mode setting, Receive a message, Check new messages, MessageR/MessageF, SSL certificate, User certificate, Host selection, What is i-motion?, Download i-motion, and so on... Mail What is i-mode mail?, Mail menu, Compose and send mail, Compose and send Deco-mail, Template, File attachment, Save mail, Auto receive, Receive option, Check new messages, Reply to mail, Forward...

  • Page 10: Features Of The Foma So702I

    Features of the FOMA SO702i “FOMA” is the name of NTT DoCoMo’s mobile service based on the W-CDMA (Wideband Code Division Multiple Access) system, which has been approved as a global standard of third generation (3G) wireless communications systems (IMT-2000 or International Mobile Telecommunications-2000).
  • Page 11 Dual Style Compact and Simple Design With the Dual Style SO01 (optional) that allows Slim and compact body is achieved while you to change the covers at both the front and employing the Dual Style feature and the round- rear sides of the FOMA terminal, you can form design that fits your hand comfortably.

  • Page 12: Making Full Use Of So702I

    Making Full Use of SO702i ! i-Channel You can automatically receive a variety of information on a regular basis. You can also display a list of available channels by pressing . i-Channel provides you with information that is rich and detailed (P.222).
  • Page 13 Menu Pattern You can change the design of the stand-by display and menu display with one operation (P.99). Default ([Clear white]) Change to [PostPet] Stand-by display Menu display Stand-by display Menu display  →  最高２０℃  １０  →  最高２０℃  １０ Ｍａｉｌ ｉ−ｍｏｄｅ Ｍａｉｌ ｉ−ｍｏｄｅ Ｓｅｌｅｃｔ Ｓｅｌｅｃｔ ＭＥＮＵ...

  • Page 14: Safety Precautions (Observe Strictly)

    Safety Precautions (Observe Strictly) For safe and proper use of the FOMA terminal, please read the “Safety Precautions” prior to use. Keep the Manual in a safe place for future reference. ALWAYS observe the safety precautions since they intend to prevent personal injury or property damage.
  • Page 15 Adapter 01 for both domestic and overseas use, malfunction. Also, it may cause the FOMA Battery-Powered Charger 01 battery pack to leak, overheat, ※ Contact our service counter (DoCoMo explode, or catch fire. shop, etc.) for information on other compatible products.
  • Page 16 CAUTION Do not place on an unstable or inclined Keep the FOMA terminal, battery platform. pack, adapter, and UIM out of the reach of babies and infants. Doing so may cause the device to fall Don’t and cause injury or malfunction. Failure to do so may cause accidental swallowing or injury.
  • Page 17 WARNING Power off the FOMA terminal in a If you hear thunder while using the place where the use is prohibited such FOMA terminal outdoors, power off as in airplane or hospital. immediately and take shelter in a safe place. The FOMA ter minal may affect electronic equipment and electronic Failure to do so may cause injury or...
  • Page 18 CAUTION Do not place a magnetic card, etc. In rare cases, using the FOMA near the FOMA terminal or do not let terminal may interfere with the it caught by the folded FOMA terminal. operation of electronic devices in Don’t some types of vehicle.
  • Page 19 The battery pack may become the source of fire or environmental destruction. Take the Don’t used battery pack to our service counter (DoCoMo shop, etc.) after insulating it by affixing an adhesive tape on the terminal of it or follow the instructions of the local authorities in charge of collecting used battery packs.
  • Page 20 WARNING Use the adapter only on the specified Clean dust from the plug. power supply and voltage. Failure to do so may cause fire. Failure to do so may cause fire or malfunction. Always use the FOMA When you connect the AC adapter to AC Adapter 01 for both domestic and the power outlet, make sure that it overseas use, especially when you...
  • Page 21 Handling the UIM CAUTION Please be careful when you remove the UIM (IC portion). Failure to do so may damage your hand or fingers. Handling the FOMA Terminal Near Electronic Medical Equipment ■The following instructions observe the guidelines of the Electromagnetic Compatibility Conference, Japan to protect electronic medical equipment from radio waves from mobile phones.

  • Page 22: Handling Precautions

    ●Note down the information saved in the FOMA terminal in a separate note and keep it safely. • Under no condition will DoCoMo be held liable for any damaged or lost data saved in the FOMA terminal. ●Do not sit down with the FOMA terminal in the hip pocket of your trousers or skirt. Also, do not keep the FOMA terminal in a place where it may be subject to excessive force such as at the bottom of a bag.
  • Page 23 ●Note down the information saved in the UIM in a separate note and keep it safely. • Under no condition will DoCoMo be held liable for any damaged or lost data saved in the UIM. ●Take an expended UIM to our service counter (DoCoMo shop, etc.) for proper disposal in order to protect the environment.

  • Page 24: Intellectual Property Right

    • “FOMA”, “mova”, “i-mode”, “i-channel”, “i-αppli”, “i-αppli DX”, “i-motion”, “i-αppli Search”, “i-anime”, “i-melody”, “i-shot”, “i-area”, “Deco-mail”, “Short Mail”, “mopera U”, “mopera”, “DoPa”, “WORLD CALL”, “WORLD WING”, “My DoCoMo”, “Chaku-motion”, “FirstPass”, “Dual Network”, “QUICKCAST”, “Public mode”, “Security Scan”, “sigmarion”, “musea”, “V-Live”, “visualnet”, “FOMA” logo, “i-mode” logo, and “i-αppli” logo are trademarks or registered trademarks of NTT DoCoMo.
  • Page 25 • ImageStar is a registered trademark of Ainix Corporation. • This product incorporates NetFront of ACCESS CO., LTD to perform Internet functions. NetFront is a trademark or registered trademark of ACCESS CO., LTD in Japan and other countries. Copyright © 1996-2006 ACCESS CO., LTD. •...

  • Page 26: Supplied And Optional Accessories

    Supplied and Optional Accessories ■Supplied accessories FOMA SO702i Manual for FOMA SO702i (this manual) (w/warranty, Front Cover SO01, (w/Quick Manual P.332) and Rear Cover SO02) FOMA SO702i CD-ROM (“Manual for Data Communication” (PDF format) is included) ■Optional accessories FOMA AC Adapter 01...
  • Page 27 Before Using the FOMA Terminal Part Names and Functions ....................26 Using the Display ........................28 Selecting the Menu ....................... 31 Using the UIM ........................33 Attaching and Removing the Battery Pack ................35 Charging the FOMA Terminal ....................36 Checking the Battery Level ................

  • Page 28: Part Names And Functions

    Part Names and Functions Connecting the Flat-Plug Switched Earphone Mic (optional) FOMA SO702i Dimensions (mm) : 94 × 47 × 23 (H × W × D) (Height and depth are of the closed FOMA terminal.) Weight (g) : About 103 (with battery pack attached) ＊To use the “Memory Stick Duo”, you need to obtain it separately (P.233).
  • Page 29 1 Incoming Indicator Clear Key Flashes when receiving a call/mail. It flashes when there Press to cancel the current operation. is a missed call or new mail/unread message (P.89, 101). In the i-αppli stand-by display, press to operate the Press this part to remove the Dual Style (front cover) software (P.218).

  • Page 30: Using The Display

    Four-way Keys and Enter Key Symbols in Operation Description this manual Enter key Set a selected item. Function as the shutter in the Camera mode Left Right (P.124, 127). arrow arrow arrow Up arrow Move the cursor upward. Press for over a second to move the cursor continuously.
  • Page 31 / / / Radio wave condition Battery level (P.38) During i-mode (P.146) Current time (24-hour format) During i-mode communications The vibrator is set for incoming calls (P.89) During packet communications (P.268) The vibrator is set for incoming mail (P.89) While sending/receiving packet communication The vibrator is set for incoming calls and mail data (P.268) (P.89)
  • Page 32 Notification Display An icon is displayed in the notification display to alert you, for example, when you cannot answer a call. The icon is displayed from the left in the order of the latest event. Move the cursor to the icon to display the text information and select the icon to check the notification information.

  • Page 33: Selecting The Menu

    Selecting the Menu Default Size of the menu display: Regular size The FOMA terminal provides various functions. Press (MENU) to display the menu display. You can switch the menu display between [Normal] and [Simple mode] as well as change menu icons to be displayed in the Normal mode (P.100).

  • Page 34: List Of Menus (P

    Selecting a Function from the Menu Display A function can be executed easily by going through the menus. Press (MENU). The menu display appears. Press to select a menu and press The function associated to the menu is selected. ● You can execute a function in the menu display by pressing a key on the keypad.

  • Page 35: Using The Uim

    Using the UIM The UIM (FOMA card) records user information such as your phone number. Insert a UIM in a FOMA-compatible terminal to use it. Inserting/Removing the UIM When inserting/removing the UIM (FOMA card), make sure to power off and close the FOMA terminal, remove the battery pack, and perform the operation with the FOMA terminal held with your hand.

  • Page 36: Service Numbers

    About the Function for Restricting UIM Operation The FOMA terminal provides a function for restricting UIM (FOMA card) operation in order to protect your data and files. If you record a videophone message or download files or data from sites or mail while the UIM is inserted in the FOMA terminal, the UIM operation restriction function is automatically set for these data and files.

  • Page 37: Attaching And Removing The Battery Pack

    WORLD WING WORLD WING is the DoCoMo’s FOMA international roaming service that enables you to place or receive a call using the same mobile phone number even when you are overseas, just by replacing the UIM (green) with a card for a WORLD WING service-compatible FOMA terminal or overseas-use mobile phone (W-CDMA or GSM system).

  • Page 38: Charging The Foma Terminal

    (The average life of a battery pack is about one year. However, depending on the frequency of use, the life may become shorter.) Return all spent battery packs to NTT DoCoMo or a dealer, or a recycling shop to protect the environment.
  • Page 39 How to Charge the FOMA Terminal Below is the procedure to charge the battery pack using the optional Desktop Holder SO02 with the FOMA AC Adapter 01 connected. Make sure to see the user’s manuals of the Desktop Holder and AC Adapter. Insert the connector The battery pack cannot be charged alone.

  • Page 40: Checking The Battery Level

    Checking the Battery Level The estimated battery level is indicated in the display. • Use this level only as estimated. Display Charge level Sufficiently charged. Slightly low. Very low. It is recommended to charge. (Flashes) The battery level is 0. Charge. ●...

  • Page 41: Powering On/Off

    Powering On/Off • The screen for confirming whether to execute the SW Update may appear when you power on the FOMA terminal (P.312). Press for over two seconds. The FOMA terminal is powered on, the display and the keypad lights are turned on, and the Wake-up image (animation) is displayed.

  • Page 42: Setting The Date/Time And Time

    Setting the Date and Time Default Date: ----/--/-- ---/Time: --:-- Set the date and time of the FOMA terminal. From the Menu, select [Settings] → [Management] → [Date/time] and press Ｄａｔｅ／ｔｉｍｅ Ｄａｔｅ −−−−／−−／−− −−− Ｔｉｍｅ     −−：−− Enter the year, date, and time. Enter the year and date within the range from 2000/01/01 to 2050/12/31. Enter the time in 24-hour format (00:00 to 23:59).

  • Page 43: Checking Your Own Phone Number

    Checking Your Own Phone Number Your phone number can be checked. You can also save your name, mail address, etc (Own number). • If the Own number is saved as Secret, the data other than your phone number, mail address, and Additional No. is not displayed.
  • Page 44 Save each item. Icon Item Settings Your mail address Enter a mail address within 50 half-width alphanumeric characters. Your name Enter a name within 16 full-width or 32 half-width characters. Reading Check the reading which is automatically entered. • To edit the reading, enter a reading within 32 half-width characters.
  • Page 45 Placing/Receiving Calls ■Placing Calls Placing a Call ........................44 Switching from Voice Call to Videophone Call ........<Chg. to videophone> Redialing Previously Dialed Numbers ............<Redial record> Changing the Caller ID Setting ON/OFF for an Individual Call ......<186/184> Placing a Call by Specifying a Condition ................49 Setting a Prefix ....................

  • Page 46: Placing A Call

    Placing a Call Check the radio wave condition and enter a phone number. • Do not cover the antenna with your hands for a call in better radio wave condition. Enter a phone number in the stand-by display. • You can enter a phone number of up to 80 digits. •...
  • Page 47 If you enter “P (pause)” between the phone number and touch-tones when you book a ticket, ＊ play back your home answering machine, or send a message to a DoCoMo pager , the touch-tones are sent by separating the numbers at the pause (P).
  • Page 48 Switching from Voice Call to Videophone Call A caller can switch to videophone call during a voice call. • This function can be used only between terminals that can switch between voice and videophone calls. A recipient must preset the V.ph switch notice to [Activate] (P.76). Press (Func) during a voice call, select [Chg.
  • Page 49 Redialing Previously Dialed Numbers Up to 30 previously dialed calls are saved in the Redial record with their dates/times, phone numbers, and names. The redial records can also be listed in the order of phone numbers you most frequently dial (Dial frequency record). Press ) in the stand-by display.
  • Page 50 Deleting the Redial Record The Redial and Dial frequency records are retained even if the FOMA terminal is powered off. If you do not wish others to know the previously dialed records, delete one or all of the redial/dial frequency records. •...
  • Page 51 Placing a Call by Specifying a Condition When you place a call, you can select a call type and call condition from the Call menu, for example, whether to notify a recipient of your phone number. Example: Placing a voice call Enter a phone number in the stand-by display and press (Call).
  • Page 52 • If you have an overseas specific 3G mobile phone, you can connect to an international videophone by selecting videophone after the above dialing method. ※ See the NTT DoCoMo website for information about countries to which a videophone call can be connected and telecommunication companies.
  • Page 53 Setting a Number Other Than WORLD CALL Default Auto assist: Auto IDD prefix - Int’l call1: Name World Call/Prefix 009130010 Country code - Country code1: Country Name 日本/Country code +81 You can save up to three prefixes or country codes to be added at the beginning of a phone number in order to place an international call.
  • Page 54 Select an input field and press Ｃｏｕｎｔｒｙ ｃｏｄｅ１ Ｃｏｕｎｔｒｙ Ｎａｍｅ  日本 Ｃｏｕｎｔｒｙ ｃｏｄｅ  ＋８１ Enter a country name in the country name field and a country code in the country code field. Enter a country name within eight full-width characters or 17 half-width characters and a country code within 26 digits.
  • Page 55 Setting the Alarm When Reconnecting a Dropped Call Default High This function automatically reconnects the call interrupted during a voice or videophone call due to the radio wave condition, such as in a tunnel or between buildings, right after the radio wave condition is recovered. You can set an alarm tone when a call is reconnected. From the Menu, select [Settings] →...
  • Page 56 Talking Hands-free While Driving You can place or receive a voice call using a hands-free device by connecting the FOMA terminal to a device such as the In-Car Hands-Free Kit 01 (optional) or car navigation system. For details about the operation of the hands-free device, see the user’s manual of the device.

  • Page 57: Voice Mail Service

    Receiving a Call When you receive a call, you are notified by flashing indicator, ring tone, vibrator, etc. The operation for an incoming call varies depending on the settings of the Incoming set, Manner mode, etc. When receiving a call, press A phone number appears in the display when a caller sends it.
  • Page 58 Receiving a Call by Switching from Voice Call to Videophone When a caller switches from a voice call to a videophone call, a recipient can select the image to be sent. • This function can be used only between terminals that can switch between voice and videophone calls. Preset the V.ph switch notice to [Activate] (P.76).
  • Page 59 Closing the FOMA Terminal to Finish/Put on Hold the Call Default Hang up You can set the operation when the FOMA terminal is closed during a voice or videophone call. From the Menu, select [Settings] → [Call] → [Call setting] → [Flip fold] and press [Hang up] : Finish the call.
  • Page 60 Using the Received Record Up to 30 previously received calls are saved in the Received record with their dates/times, phone numbers, and names. A ring time for a missed call can be checked. Press ) in the stand-by display. The phone numbers or names appear in descending order from the most Ｒｅｃｅｉｖｅｄ Ｆｒｅ...
  • Page 61 Deleting the Received Record The received record is retained even if the FOMA terminal is powered off. If you do not wish others to know the previously received records, delete one or all of the received records. Example: Deleting a received record From the Received record display, select the received record and press (Func).

  • Page 62: Putting A Call On Hold

    Putting a Call on Hold If you cannot answer a voice or videophone call immediately, you can put the call on hold. • Even if the answer is put on hold, the caller is charged for the calling charge. Example: Putting a voice call on hold When receiving a call, press The beeps sound and the answer is put on hold.
  • Page 63 ■When the Public mode (Driving mode) is set • Even if there is an incoming call, the ring tone does not sound and you cannot answer it. The notification icon of missed call appears and the call is saved in the Received record. The guidance for the Public mode is played back to inform the caller that you are unable to answer the call because you are driving or in a place where talking on a mobile phone should be avoided (trains, buses, or movie theaters), and then the call is disconnected.
  • Page 64 Using the Public Mode (Power off) The Public mode (Power off) is an automated answering service which takes into account the manners in highly public places. When the Public mode (Power off) is set, the guidance is played back to inform the caller that you are unable to answer the call because you are in a place where it is required to power off a mobile phone (such as in hospitals, airplanes, and near priority seats in trains), provided that there is an incoming call when the FOMA terminal is powered off, and then the call is disconnected.
  • Page 65 It is recommended that you make a separate note of the recorded voice message. The data may be lost as a result of malfunction, repair, change, or other handling of the FOMA terminal. Under no condition will DoCoMo be held liable for any damaged or lost data saved in the FOMA terminal. ●...
  • Page 66 When Receiving a Call The answering message is played back to the caller after the ring tone Ｐｌａｙ ａｎｓｗｅｒ ｍｅｓｓａｇｅ ドコモ一郎 sounds for the set duration. To talk to the caller Press When you receive a videophone call The answering message is played back and the answering image is displayed to the caller.
  • Page 67 Setting the Operation of the Record Message Set: OFF/To answer: 8 sec/Answer img(V.phone)・Record img(V.phone): テレビ電話動作中 Default Press in the stand-by display, select [Set rec msg], and press Ｓｅｔ ｒｅｃｏｒｄ ｍｅｓｓａｇｅ Ｓｅｔ      ＯＦＦ Ｔｏ ａｎｓｗｅｒ  ００８ｓｅｃ      （０００−１２０） Ａｎｓｗｅｒ ｉｍｇ（Ｖ．ｐｈｏｎｅ）    テレヒ゛電話動作中 Ｒｅｃｏｒｄ ｉｍｇ（Ｖ．ｐｈｏｎｅ）    テレヒ゛電話動作中 Enter the time before starting the answering message at [To answer]. Enter from 000 to 120 seconds.
  • Page 68 Playing Back/Deleting a Record Message/Voice Memo You can play back or delete a recorded record message/videophone message and voice memo (P.254). Playing Back a Record Message/Voice Memo Example: Playing back a record message Press in the stand-by display, select [Play rec msg], and press To play back a videophone message Ｐｌａｙ ｒｅｃｏｒｄ ｍｅｓｓａｇｅ...
  • Page 69 Placing/Receiving Videophone Calls What is Videophone? ......................68 Placing a Videophone Call ....................69 Receiving a Videophone Call ....................72 Using Chara-den ........................73 Setting the Videophone Operation ............<Videophone setting> Setting Notice for Switching between Voice and Videophone Calls .. <Videophone switch notice>...

  • Page 70: What Is Videophone

    What is Videophone? You can use the videophone function between DoCoMo videophone compatible terminals. You can use videophone to talk to the recipient/caller while looking at each other’s image. You can send a still image, substitute image, or Chara-den character instead of your own.

  • Page 71: Placing A Videophone Call

    Operations during a Videophone Call Operation Key operation Switch between camera image/substitute Press (MySide/Sub). Every time you press the key, the display is image switched between camera image/substitute image. Switch cameras Press (In/Out). Every time you press the key, the camera is switched between the In-/Out-camera.
  • Page 72 ● If you enter a phone number, press (Call), and select [Videophone] from the Call menu, you can place a videophone call by specifying an image to be sent and communication speed. ● You may not be able to place a videophone call while another function is being executed. ●...
  • Page 73 Switching from Videophone Call to Voice Call A videophone caller can switch to voice call during a videophone call. • This function can be used only between terminals that can switch between voice and videophone calls. A recipient must preset the V.ph switch notice to [Activate] (P.76). Press (Func) during a videophone call, select [Chg.

  • Page 74: Receiving A Videophone Call

    Receiving a Videophone Call When you receive a videophone call, you are notified by flashing indicator, ring tone, vibrator, etc. The operation for an incoming call varies depending on the settings of the Incoming set, Manner mode, etc. When you receive a videophone call, press (V.phone).

  • Page 75: Using Chara-Den

    Receiving a Call after Switching from Videophone Call to Voice Call When a videophone caller switches from a videophone call to voice call, the recipient’s phone automatically switches to a voice call. • This function can be used only between terminals that can switch between voice and videophone calls. Preset the V.ph switch notice to [Activate] (P.76).

  • Page 76: Setting The Videophone Operation

    Setting the Videophone Operation Setting the Display to Be Used in a Videophone Call Default Main-Other side You can set the image to be displayed on the videophone images (Large) and (Small) during a videophone call. From the Menu, select [Settings] → [Call] → [Videophone] → [Display setting] and press [Main-Other side] : Display the recipient’s/caller’s image on the videophone image (Large) and your image on the videophone image (Small).
  • Page 77 Setting the Videophone Image Quality Default Normal You can set the quality of an image to be sent to the recipient. From the Menu, select [Settings] → [Call] → [Videophone] → [Visual preference] and press [Prefer img qual] : Send an image with priority on image quality. [Normal] : Send an image by keeping a balance between image quality and movement.

  • Page 78: Setting Notice For Switching Between Voice And Videophone Calls

    Setting Notice for Switching between Voice and Videophone Calls You can set whether to notify the recipient/caller that the FOMA terminal is capable of switching between voice and videophone calls. • You cannot perform this setting when you are outside of the service area or in a place where radio waves do not reach, or during a voice or videophone call.
  • Page 79 Phonebook Phonebooks the FOMA Terminal Can Use ................78 Saving an Entry in the FOMA Terminal Phonebook ..<Add to FOMA terminal phonebook> Saving an Entry in the UIM Phonebook ........... <Add to UIM phonebook> Saving the Redial/Received Record in the Phonebook ............81 Saving a Group ....................

  • Page 80: Phonebooks The Foma Terminal Can Use

    The saved data may be lost as a result of malfunction, repair, change, or other handling of the FOMA terminal. Under no condition will DoCoMo be held liable for any damaged or lost data saved in the Phonebook, etc. ●...

  • Page 81: Saving An Entry In The Foma Terminal Phonebook

    Secret code is used when sending mail. • When you save a mail address as “phone number + Secret code@docomo.ne.jp” in the Phonebook, if you save a Secret code, you cannot send mail or reply mail to this address. To avoid this problem, change the mail address to “phone number@docomo.ne.jp”...
  • Page 82 Icon Item Settings Call image Select from My picture of the Data box or shoot a call image to be displayed when placing/receiving a call, right after receiving mail and when displaying the individual Phonebook entry. • You can set a GIF or JPEG image not exceeding 100K bytes in file size and [Stby(240×320)] in image size.

  • Page 83: Saving An Entry In The Uim Phonebook

    Saving an Entry in the UIM Phonebook Up to 50 entries can be saved in the UIM (FOMA card) phonebook. Press ) in the stand-by display and press (Create). Select [UIM] and press To save an entry in the FOMA terminal phonebook Ｅｄｉｔ ｐｈｏｎｅｂｏｏｋ...

  • Page 84: Saving A Group

    Select [New] and press The screen for selecting where to save appears. When you select [Add] Select an entry to which you want to add from the Phonebook. Select [Main memory] and press The Edit phonebook display appears. To save to the UIM phonebook Select [UIM].

  • Page 85: Displaying The Phonebook

    Select a group icon at [ Save the Call image, Des phone tone, and Select phone Illum. • Follow the same steps as those for the Call image, Des phone/mail tone, and Select phone/mail Illum. described in the Add to FOMA terminal phonebook (P.80). Press (Complete).

  • Page 86: Searching The Phonebook

    Searching the Phonebook The Phonebook can be searched to display up to 100 entries temporarily. Press (Func) in the Phonebook. The Function menu appears. Select [Search] and press : Enter the first part of a reading within 32 half-width characters. [Name] Ｓｅａｒｃｈ ｐｈｏｎｅｂｏｏｋ...

  • Page 87: Editing A Phonebook Entry

    Editing a Phonebook Entry From the Phonebook, select an entry and press Press (Edit). The Edit phonebook display appears. Edit each item. • Follow the appropriate procedures described in the Add to FOMA terminal phonebook (P.79, step 3) or in the Add to UIM phonebook (P.81, step 3).

  • Page 88: Checking The Number Of Entries Saved

    Checking the Number of Entries Saved You can check the number of entries saved in the FOMA terminal phonebook and UIM (FOMA card) phonebook and the number of locations still available or entries saved as Secret. Press (Func) in the Phonebook. The Function menu appears.
  • Page 89 Sound/Display/ Light Settings Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail ..<Incoming set> ■Setting the Ringer Setting the Sounds of the FOMA Terminal ............ <Set basic tone> Adjusting the Volume of Caller’s Voice ..............<Volume> Adjusting the Volume While Playing Flash Movie ........... <Sound effect>...

  • Page 90: Setting The Ring Tone/Image/Indicator Color For Incoming Call And Mail

    Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail Common to all incoming types - Ring tone: 着信音1/Ring volume: 3/Vibrator: OFF/Color: C1:Color1 Default Call - Incoming image: 音声発着信中 Videophone - Link incoming call: OFF/Incoming image: テレビ電話発着信中 Mail - Incoming image: メール受信完了/Alert time: Play once OFF, Alert time 4 sec MessageR・MessageF - Link receive mail: ON/Incoming image: メール受信完了/Alert time: Play once OFF, Alert time 4 sec You can set a ring tone, ring volume, incoming image, vibration pattern, and incoming indicator color for each type of incoming transmission (voice or videophone call or mail,...
  • Page 91 Select an image from the Data box at [Incoming image]. • For Call and Videophone, you can set a GIF/JPEG image or Flash movie not exceeding 500K or 100K bytes in file size respectively and [VGA(480×640)] in image size from My picture, and an i-motion with video and sound tracks or with video track only of an image size of [sQCIF(128×96)] or [QCIF(176×144)] from i-motion.

  • Page 92: Setting The Sounds Of The Foma Terminal

    ● If several ring tones, call images, and incoming indicator colors are set for voice/videophone call/mail, the following priority is applied. 1. Ring tone of Number Setting (When you receive a call to an Additional No. for the Multi Number) 2.

  • Page 93: Adjusting The Volume Of Caller's Voice

    Adjusting the Volume of Caller’s Voice Default The volume of caller’s voice during a voice or videophone call can be adjusted in five levels from level 1 (smallest) to level 5 (largest). From the Menu, select [Settings] → [Call] → [Call setting] → [Volume] and press Ｖｏｌｕｍｅ...

  • Page 94: Setting The Poor Signal Quality Alert

    Setting the Poor Signal Quality Alert Default You can set to inform you with alarm of the possibility of the call being disconnected during a voice call due to the radio wave condition. From the Menu, select [Settings] → [Call] → [Call quality] → [Quality alarm] and press [High] : Sound a high alarm tone.

  • Page 95: Muting The Ring Tone

    Muting the Ring Tone All sounds from the FOMA terminal can be disabled to avoid disturbing others by using the Manner mode. There are three types of the Manner mode. Set the mode by using the Manner mode setting (P.94). •...

  • Page 96: Changing The Manner Mode Settings

    Changing the Manner Mode Settings Default Set: OFF/Mode: Manner The Manner mode can be selected from three types: “Manner”, “Silent”, and “Original manner”. Press in the stand-by display. Ｍａｎｎｅｒ ｍｏｄｅ Ｓｅｔ      ＯＦＦ Ｍｏｄｅ  Ｍａｎｎｅｒ Ｏｒｉｇｉｎａｌ ｍａｎｎｅｒ Select the type of the Manner mode at [Mode]. Press (Complete).

  • Page 97: Setting The Stand-By Display

    Setting the Stand-by Display Default Stand-by display: Pattern/Ticker: Std Calendar/Clock - Type: Digital clock-S/Font color: Blk/Clock style: 12h Soft key: ON You can set the image for the stand-by display, the Telop display for i-Channel, Calendar/ Clock display, and whether to show or hide the guide display. From the Menu, select [Settings] →...
  • Page 98 Press (Type 1 to 4) to adjust the display position and press (OK). Every time you press (Type 1 to 4), the position of the calendar and clock moves. When [Calendar-L/Clock] or [Calendar-L] is selected You cannot change the display position. Select the font color of the calendar and clock at [Font color].

  • Page 99: Setting Images For Placing A Call/Sending Mail

    Setting Images for Placing a Call/Sending Mail Default Sending: 音声発着信中 /V.phone sending: テレビ電話発着信中 /Mail sending・Check new message: パケット通信 You can set an image that appears when you place a voice or videophone call, send mail, and perform other events. Example: Setting an image to be used when you place a call From the Menu, select [Settings] →...

  • Page 100: Setting The Display And Keypad Illumination

    Setting the Display and Keypad Illumination Default Adjust light: 3/Keypad light: 1 Display light - Charging・Internet: OFF/Videophone・Photo shoot・Movie shoot・Movie play: ON You can set the brightness of the display and keypad and whether to keep the display light on all the time. From the Menu, select [Settings] →...

  • Page 101: Saving Power For The Display

    Saving Power for the Display Default 3 min The display is automatically turned off to save battery power when no operations are made for a specific period. You can set the time before turning off the display. From the Menu, select [Settings] → [Display] → [Power saver] and press Select a time before starting the Power saver mode and press Select from [1min], [3min], [5min], [10min], [15min], [30min], and [OFF].

  • Page 102: Changing The Appearance Of The Menu

    Select a menu pattern and press The Menu pattern is set. ● You can download menu patterns from “SO@Planet”. [i Menu] → [メニューリスト] → [ケータイ電話メーカー] → [SO@Planet] ● When you set a menu pattern, the images set in the Stand-by display of the Stand-by or in the Icon setting of the Menu setting are also replaced by those assigned to the selected menu pattern.

  • Page 103: Informing Missed Call/New Mail With Indicator

    Informing Missed Call/New Mail with Indicator Default The incoming indicator can be set to flash about every five seconds to notify you that there is a missed call or unread mail/SMS/message. The indicator is turned off by checking the missed call or displaying mail/SMS/message. From the Menu, select [Settings] →...

  • Page 104: Changing The Screen Display To English

    Changing the Screen Display to English Default Japanese Menus, messages, and other displays can be displayed in either Japanese or English. From the Menu, select [設定] → [管理] → [バイリンガル] and press [Japanese] : Set the display language to Japanese. ハ゛イリンカ゛ル...
  • Page 105 Security Settings ■About Security Codes Security Codes Used on the FOMA Terminal ..............104 Changing the Security Code ................ <Change code> Setting the PIN Code ..................<UIM setting> Canceling the PIN Lock ...................... 107 ■Restricting Operations and Functions Available on the Mobile Phone Various Locking Functions ....................

  • Page 106: Security Codes Used On The Foma Terminal

    ● Be very careful not to let others know your security code. If your security code is known by anyone else, DoCoMo shall have no liability for any loss due to any unauthorized use of it. ● DoCoMo by no means inquires your security code.

  • Page 107: Puk Code

    Enter a new FOMA terminal PIN1 code PIN1/PIN2 code Enter the PUK code Consecutive Enter the Contact the nearest User certificate operation three times PIN2 code DoCoMo shop Connection to a Consecutive incorrect FirstPass-compatible site 10 times input incorrect input...

  • Page 108: Changing The Security Code

    Changing the Security Code Default 0000 From the Menu, select [Settings] → [Management] → [Change code] and press  Ｉｎｐｕｔ  ｓｅｃｕｒｉｔｙ ｃｏｄｅ Enter the current Security code and press (OK). The entered Security code is displayed as asterisks ( ). Enter the new Security code and press (OK).

  • Page 109: Canceling The Pin Lock

    Changing the PIN1 Code/PIN2 Code Default Change PIN1 code・Change PIN2 code: 0000 • To change the PIN1 code, set the PIN1 code setting to [ON]. Example: Changing the PIN1 code From the Menu, select [Settings] → [Management] → [UIM setting] and press The Security code screen appears.

  • Page 110: Various Locking Functions

    Various Locking Functions The FOMA terminal offers many lock functions to assure safety operation, such as preventing unauthorized use of the FOMA terminal, protecting the Phonebook from being seen by others. You can use any mix of these functions depending on the purpose. Functions Description Lock all...

  • Page 111: Locking The Keypad To Prevent Unauthorized Use

    Locking the Keypad to Prevent Unauthorized Use Default You can set the Lock all to prevent others from using the FOMA terminal. When the Lock all is set, you cannot perform any operation other than powering on/off the FOMA terminal. From the Menu, select [Settings] →...
  • Page 112 Select [ON]/[OFF] of the Remote lock at [Set]. Enter the duration for counting the number of incoming calls at [Monitoring]. Enter from 01 to 10 minutes. Enter the number of calls to be received within the specified duration at [Times]. Enter from 03 to 10 times.

  • Page 113: Restricting Placing/Receiving Calls

    If there is an incoming call when the Self mode is set, the caller hears a guidance informing that the FOMA terminal is outside of the service area or the FOMA terminal is powered off. When using the DoCoMo Voice Mail Service or Call Forwarding Service, these services can be used in the same manner as when the FOMA terminal is powered off.

  • Page 114: Restricting Dialing From The Keypad

    ● When the PIM lock and Key dial lock are set simultaneously, “ ” is displayed instead of “ ”. ● If you set the PIM lock when data other than that preinstalled in the [Preinstall] folder of the Data box is set for the image, substitute image, or ring tone in the stand-by or other display, the setting is reset to the default setting.

  • Page 115: Restricting Callers And Senders Setting The Display Of The Redial/Received Record

    Setting the Display of the Redial/Received Record Default Record display: ON The Redial, Dial frequency, and Received record can be set not to be displayed. Playback of the Record message is also disabled. To cancel the Record display temporarily, enter the Security code.

  • Page 116: Specifying Phone Numbers To Accept/Reject Calls

    Specifying Phone Numbers to Accept/Reject Calls Default Set: OFF You can set to accept/reject a voice or videophone call only from a specific phone number. For the Accept/Reject calls, up to 20 phone numbers can be saved (List). You can also set to accept/reject calls only from specific groups in the FOMA terminal phonebook.

  • Page 117: Rejecting Calls With No Caller Id

    Rejecting Calls with No Caller ID Default User unset・PublicPhone・Not support: OFF When receiving a voice or videophone call without the caller’s phone number displayed, the reason for not displaying it is shown. You can decide whether to accept a call based on the reason.

  • Page 118: Rejecting Calls From Callers With No Phonebook Entry

    Select [ON]/[OFF] at [Missed call display]. [ON] : Display all calls in the Received record. [OFF] : For a call the ring time of which is shorter than the set time, neither the missed call notification icon nor the received record is displayed. The call is saved in the Received record. If a record message or videophone message is recorded, the received record is displayed.

  • Page 119: Other Measures "For Safety Operation

    Other Measures “For Safety Operation” The following items are available for safety use of the FOMA terminal. Purpose Function/Service name Page Do not receive mail from unknown senders. Change Mail Address, Register a See the “i-mode Secret Code User’s Manual”. Receive/do not receive mail from the specific domains Spam Mail Prevention (Reject/Receive or senders.
  • Page 121 Camera Before Using the Camera ....................120 Recording Still Images ................. <Record still images> Recording Movies ..................<Record movies> Displaying Saved Images ....................128 Changing the Camera Settings ..................128 Adjusting the Camera during Recording ................131 Setting the Camera Operation .................... 134 Using the Bar Code Reader ..............

  • Page 122: Before Using The Camera

    Before Using the Camera You can record images by the FOMA terminal’s built-in camera, which you can send by attaching to i-mode mail and set for the stand-by display, etc. To use the “Memory Stick Duo”, you need to obtain it separately. If you do not have a “Memory Stick Duo”, you can purchase it at a home electric appliance store or other similar store (P.233).
  • Page 123 About the Camera Mode To use the camera, select [Entertainment] → [Camera]/[Movie] from the Menu and press . The Camera mode is activated, an image through the camera lens appears in the display and the Auto timer indicator lights. To terminate the Camera mode, press ●...
  • Page 124 About Recording Time of Movie The recording time of movie that can be saved in SO702i or the “Memory Stick Duo” varies depending on the recorded image quality, Shoot mode, image size, file size restriction settings as well as the recording conditions and object of shooting. ■Estimated recording time of movie you can record and save in SO702i Recording time available for each movie Total recording time available...
  • Page 125 Icons in the Camera Mode In the Camera mode display, the following icons appear depending on the settings and functions selected. • You can use (Disp) to switch the display of the icons and guide display (Standard, Simple, or Display off). Even if you select “Display off”, related icons are displayed when you perform any operations.

  • Page 126: Recording Still Images

    Recording Still Images You can record still images using the camera. • When there is not enough memory or the number of saved images exceeds the maximum number, the message appears. Change the place to save the image or delete unnecessary images. •...
  • Page 127 Recording Images in Close to the Object You can record an object in close distance (about 7 cm). Slide the macro switch to the “ ” position in the Camera mode display. The Macro mode is set. To cancel the Macro mode Slide the macro switch to the opposite position of “...
  • Page 128 Recording Images with Frames You can record an image with a frame, which can be selected from the preinstalled frames or downloaded frames. • The size of images recorded with a frame is determined according to the frame you selected and cannot be changed.

  • Page 129: Recording Movies

    Recording Movies You can make movie recordings with the built-in camera. • The movie recording time varies depending on where to save a movie (P.122). When you save it to the “Memory Stick Duo”, you can record up to 60 minutes per movie. •...

  • Page 130: Displaying Saved Images

    Displaying Saved Images You can check the saved image. • For details about the operation, see My picture (P.226) and i-motion (P.229). Example: Playing back a recorded still image Press (Play) in the Camera mode display. The recorded image appears. To display an image in enlarged or original size Press (Enlarge/True img).
  • Page 131 Select a scene and press The scene is set and the icon for the current scene type appears. • No icon appears for [AUTO]. Beach/snow People Party Night scene Landscape Sports Low Light Switching the Camera Used for Recording You can switch between the Out- and In-cameras for recording. (Func) in the Camera mode display, select [Shoot] →...
  • Page 132 Using the Auto Timer The Auto timer allows you to record yourself or others without holding the FOMA terminal. You can also set the interval until recording is started after you press the shutter. (Func) in the Camera mode display, select [Shoot] → [Auto timer], and Press press The menu for selecting a time before starting recording with the Auto timer appears.

  • Page 133: Adjusting The Camera During Recording

    Adjusting the Camera during Recording Adjusting Brightness The image brightness (exposure) can be adjusted in seven levels from –1.0EV to +1.0EV according to the ambient condition (EV: Exposure Value). (Func) in the Camera mode display, select [Adjust] → [EV], and press Press •...
  • Page 134 Setting Spot Photometry When recording an object against light or an object with the strong contrast to the background, the exposure can be adjusted automatically with reference to the center of the display. (Func) in the Camera mode display, select [Adjust] → [Photometry], and Press press The menu for selecting a photometry mode appears.
  • Page 135 Adjusting White Balance The color balance of the image can be adjusted depending on the lighting condition. If a recording image appears in unnatural colors, set the white balance in accordance with the recording environment. (Func) in the Camera mode display, select [Adjust] → [White balance], and Press press The menu for selecting a white balance appears.

  • Page 136: Setting The Camera Operation

    Setting the Camera Operation Selecting the Image Quality Default Still image: Standard/Movie: Standard You can select the image quality for recording images. (Func) in the Camera mode display, select [Set] → [Image quality], and Press press Still image  Ｓｈｏｏｔ Ａｄｊｕｓｔ   Ｓｅｔ Ｓｅｌｅｃｔ ｓａｖｅ ｔｏ...
  • Page 137 Restricting the Size of a File Used for Movie Recording Default Attach(S) You can restrict the size of a movie file to a file size that can be attached to i-mode mail. (Func) in the Camera mode display, select [Shoot] → [Switch mode] → Press [Movie shoot], and press The display switches to the Movie shoot display.
  • Page 138 Selecting Where to Save Images Default Data box You can set the place to save recorded images. Example: Selecting the “Memory Stick Duo” to save the recorded still images Press (Func) in the Camera mode display, select [Set] → [Select save to], and press The menu for selecting a place to save to appears.

  • Page 139: Using The Bar Code Reader

    • Up to 16 QR codes can be scanned serially so that they connect to each other and saved as a single data set. When scanning multiple “Example: FOMA SO702i” segmented QR codes, the message prompting you to scan the next QR code appears after you scan the first one.
  • Page 140 Locate the JAN/QR code at the center of the display and press (Scan). The scanning of the JAN/QR code starts. Ｓｃａｎｎｉｎｇ Ｓｃａｎｎｉｎｇ Ｓｃａｎｎｉｎｇ When the scanning is completed, the end sound is heard and the data that has been scanned is displayed in the normal display. To save scanned data such as a phone number Move the cursor to data such as a phone number and from the Function menu, select [Add to phonebook] →...
  • Page 141 i-mode/i-motion ※i-mode is a paid service that requires a subscription. What is i-mode? ........................140 Displaying the i-mode Menu ................ <i-mode menu> ■Displaying a Site Displaying Sites ........................146 Using Sites ......................... 147 Saving a Site in My Menu .................. <My Menu>...
  • Page 142 What is i-mode? i-mode allows you to use the i-mode compatible FOMA terminal (hereinafter referred to as i-mode terminal) to access various online services such as site (program) connection, Internet connection, and i-mode mail. ●Site (Program) Connection Various online services offered by IP (information service providers), such as weather information and news, are available by selecting Menu List accessible from the i-mode menu.
  • Page 143 オプション設定 Perform i-mode mail settings and change the i-mode password. (Options) お知らせ＆ヘルプ Present notices from DoCoMo and describe the help on i-mode (Information & Help) usage and rules. 料金＆お申込 Check charges and pay for it, make changes in subscription, (Charge &...
  • Page 144 Subscribers to i-Channel automatically receive graphics-based information such as the news and weather distributed to an i-mode terminal by DoCoMo or IP (information service providers). You can run the latest information updates on the stand-by display as Telop text by automatically getting this information on a regular basis.
  • Page 145 ●i-αppli DX i-αppli DX enables you to enjoy i-αppli more conveniently by working in conjunction with the i-mode terminal information (mail, Redial/Received record, Phonebook, etc.). For example, you can compose mail with your favorite character in the display, or set a character to notify you of the caller when receiving a call.
  • Page 146 • The messages held at the i-mode center can be received by the Check new messages (P.165). ●News Delivery Service (Tokudane News Bin) This is a news delivery service from DoCoMo, which delivers information, such as news and weather forecasts, to an i-mode terminal using the Message R.

  • Page 147: Internet Connection

    Under no condition will DoCoMo be held liable for any damaged or lost data saved in the i-mode terminal. ● When an i-mode terminal is repaired, the information downloaded using i-mode, i-αppli, and i-motion are not transferred to the new mobile phone because of copyright laws, excluding some cases.

  • Page 148: Displaying Sites

    Displaying the i-mode Menu Press (i-mode) in the stand-by display. Menu name Function ｉ−ｍｏｄｅ ｍｅｎｕ i Menu Connect the FOMA terminal to the i-mode center (P.146).  Ｍｅｎｕ Ｂｏｏｋｍａｒｋ Bookmark Display favorite sites and Internet sites (P.153). Ｓｃｒｅｅｎ Ｍｅｍｏ Ｇｏ ｔｏ ｌｏｃａｔｉｏｎ Screen Memo Display sites saved in the FOMA terminal (P.156). ｉ−Ｃｈａｎｎｅｌ...

  • Page 149: Using Sites

    Displaying SSL Site You can display SSL-compatible sites (SSL page) using an operation similar to that for general sites. • To display an SSL site, make sure to set the date and time with the Date/time setting beforehand. The message on the left appears when connecting to an SSL site. “...
  • Page 150 ■Radio button Select one item. “ ” of the selected item changes to “ ”. Ｐｌｅａｓｅ ｓｅｌｅｃｔ ａ ｌｏｃａｔｉｏｎ  Ｔｏｋｙｏ  Ｏｓａｋａ  Ｎａｇｏｙａ  Ｆｕｋｕｏｋａ  ｓｅｎｄ ■Check box Select one or more items. “ ” of the selected items changes to “ ”. Ｐｌｅａｓｅ ｓｅｌｅｃｔ  Ｂａｓｅｂａｌｌ  Ｆｏｏｔｂａｌｌ...
  • Page 151 Reloading a Page The page, which is displayed incorrectly or updated frequently, can be reloaded so that the latest data is displayed. While displaying a site, press (Func). The Function menu appears. Select [Reload] and press The display of the page is updated. Displaying a Site URL The URL of the currently displayed site can be displayed.
  • Page 152 Displaying a Site Correctly If the display of the text is incorrect on a site, you can reload the page after changing the character code. While displaying a site, press (Func). The Function menu appears. Select [Word translate] → [Convert]/[Auto select] and press [Convert] : Sequentially convert the character codes and display the page again.
  • Page 153 • If you forget the i-mode password, you must bring your official identification (such as driver’s license), the FOMA terminal, and UIM with you to the nearest DoCoMo shop. From the i-mode menu, select [i Menu] → [オプション設定] (Options) → [ｉモードパ...
  • Page 154 Displaying Internet Sites i-mode compatible Internet site can be displayed from the i-mode terminal. • Sites that are not compatible with i-mode may not be displayed correctly. From the i-mode menu, select [Go to location] → [URL address] and press The URL address display appears.
  • Page 155 Saving a Site to Display It Quickly Up to 200 URLs of the sites you display frequently can be saved in the Bookmark. The sites can be directly accessed from the Bookmark. • Both i-mode and Internet sites can be saved as bookmarks, but with some exceptions. •...
  • Page 156 Adding/Deleting Folders Folders in which bookmarks are saved can be added or deleted. Up to 10 folders can be used to manage bookmarks and folder names can also be changed. • You cannot delete the top folder in the Bookmark folder list display (default: [ブックマーク] (Bookmark)). Example: Adding a folder From the i-mode menu, select [Bookmark] and press , then press...

  • Page 157: Deleting A Bookmark

    Deleting a Bookmark You can delete bookmarks using four methods. Example: Deleting a bookmark From the i-mode menu, select [Bookmark] and press To delete all bookmarks From the Function menu, select [Delete all], enter the Security code, and select [Yes]. Select a folder and press To delete all bookmarks in the folder From the Function menu, select [Delete] →...
  • Page 158 Saving a Site in the Screen Memo You can save your favorite sites as a screen memo. You can also instantaneously call up a saved screen memo. • You can save up to 100 screen memos, each up to 100K bytes. The number of screen memos that can be saved varies between 10 and 100 depending on the size of each screen memo to be saved.
  • Page 159 Protecting a Screen Memo You can protect screen memos from being overwritten. You can protect up to 50 screen memos (up to 500K bytes). Select a screen memo from the screen memo list and press (Func). The Function menu appears. To cancel the protection Move the cursor to the protected screen memo and press (Func).
  • Page 160 Obtaining Graphics from a Site/Message You can load and save your preferred graphic from images and background images displayed on sites, screen memos, messages, and mail (i-anime compatible). You can set the obtained GIF and JPEG images for the stand-by display, as a call image, menu icon, etc., and the Flash movie for the stand-by display, as a call image, etc.
  • Page 161 Downloading Data from Related Sites You can download i-melody, Chara-den, Deco-mail templates, menu patterns, and dictionaries from related sites. ■Files that can be downloaded Maximum size Maximum number Type Format Restrictions to be saved to be saved Melody SMF, MFi 100K bytes 10 to 200 files •...
  • Page 162 Using the Phone To/Mail To/Web To/i-αppli To You can use highlighted information in a site, message, mail main body, i-motion Telop text, i-αppli, and i-Channel channel list to place a call, compose mail, display an Internet website, start i-αppli, or perform infrared communications. •...
  • Page 163 Running i-αppli from the Current Display If the current display contains any i-αppli link, the software can be started to run directly from the display. The software can also be started using the infrared communications (i-αppli To). • Download software that can be started by the i-αppli To beforehand. •...
  • Page 164 Default i-mode(UIM) ※ You do not need to change the Host setting when using the i-mode service of DoCoMo. You can set up to 10 hosts for receiving services other than the services provided by i-mode (DoCoMo). When you change a host to other than [i-mode(UIM)], you cannot use i-mode.
  • Page 165 Setting Whether to Use Saved Data for Flash Movies Default You can set whether to use the saved data (P.150) when you play back a Flash movie displayed on a site or saved in the Screen Memo. From the i-mode menu, select [i-mode setting] → [Use phone info] and press Select [Yes]/[No] and press The Use phone info is set.

  • Page 166: Receiving A Message

    Receiving a Message When a message is received while in the stand-by display, the contents of the message are automatically displayed. Up to 20 Message R and Message F each can be saved in the FOMA terminal. When receiving a message, “ ” or “ ” flashes.    Ｒｅｃｅｉｖｉｎｇ...

  • Page 167: Checking A New Message

    Setting Auto-display Default Prefer msgR You can set to display the contents of the message automatically when it is received while in the stand-by display. You can also select which message should be displayed first when receiving both Message R and Message F at the same time. From the i-mode menu, select [i-mode setting] →...

  • Page 168: Displaying A Message

    Displaying a Message The list of received messages can be displayed. From the i-mode menu, select [Message] → [MessageR]/[MessageF] and press • The figures at the right end of the title line show the order of the message at the ＭｅｓｓａｇｅＲ    １／６...

  • Page 169: Deleting A Message

    Protecting a Message Message R or Message F can be protected from being overwritten. • An unread message cannot be protected. Example: Protecting Message R From the i-mode menu, select [Message] → [MessageR] and press To protect Message F From the i-mode menu, select [Message] → [MessageF]. Select a message and press (Func).
  • Page 170 : An authentication company issues these certificates. They are ＳＳＬ ｌｉｓｔ     ２０  ＣＡ ｃｅｒｔｉｆｙ １ saved in the FOMA terminal at the time of purchase.  ＣＡ ｃｅｒｔｉｆｙ ２ [DoCoMo cert.] : This certificate is required for connecting to the FirstPass Center  ＣＡ ｃｅｒｔｉｆｙ ３ and FirstPass-compatible sites and is saved on the UIM (green).  ＣＡ ｃｅｒｔｉｆｙ ４  ＣＡ ｃｅｒｔｉｆｙ ５...
  • Page 171 ● DoCoMo shall have no liability for any content and information provided by FirstPass-compatible sites. Any problem must be resolved between you and the FirstPass-compatible site. ● DoCoMo and the authentication company do not guarantee the security for using FirstPass and SSL. Therefore, you must use them at your own discretion and responsibility.
  • Page 172 Changing the Host for Certificate Issue ドコモ Default ※ Normally, you do not need to change the setting. When you want a service other than FirstPass services, you can set one host. Note that if you change the setting, you cannot connect to the FirstPass Center. •...
  • Page 173 What is i-motion? i-motion is movie data that contains both video and sound tracks. You can play back an i-motion on the FOMA terminal and set a saved i-motion for the stand-by display. The i-motion is classified broadly into the following two types. SO702i supports only the standard type i-motion.
  • Page 174 ● Some i-motion may not be played back/saved properly even if its data is downloaded successfully. ● The playback may be paused or the image may be distorted when you play back i-motion while downloading data depending on the radio wave condition, communication line conditions, or the communication speed. ●...
  • Page 175 Mail Mail Function of the FOMA Terminal ................... 174 What is i-mode Mail? ......................175 Displaying the Mail Menu ................<Mail menu> ■Composing i-mode Mail/Deco-mail Composing and Sending i-mode Mail ........... <Compose and send mail> Composing and Sending Deco-mail ........<Compose and send Deco-mail>...

  • Page 176: Mail Function Of The Foma Terminal

    Short Mail Dial special number “1655” Maximum 50 characters i-mode mail i-mode mail Maximum 250 full-width characters i-mode terminal for Mova service FOMA terminal ※ Short Mail is a service that allows text messages to be exchanged between DoCoMo’s mobile phones.

  • Page 177: What Is I-Mode Mail

    • Users of i-mode terminals (including Mova) need to enter only the mail address portion before the @ mark to exchange mail. • PC users need to enter the full mail address (i.e. including “@docomo.ne.jp”) to send e-mail to i-mode terminals (including Mova).
  • Page 178 1 Receiving/Rejecting mail 【メール受信設定 （迷惑メール対策） → 受信/拒否設定】 (Receiving Mail (Spam Mail Prevention) → Reject/Receive Mail Settings) • You can receive mail from the specified companies selectable from DoCoMo, au, Vodafone, TU-KA, and WILLCOM. You can also receive mail from other companies by specifying the domains or addresses. You can even reject Internet mail that impersonates mail addresses of mobile phone or PHS domains.
  • Page 179 Number of Characters You Can Send/Receive The number of characters sent or received in i-mode mail is as follows. Full-width characters Half-width characters Item (kanji, hiragana, pictographs, etc.) (alphanumeric characters, katakana, etc.) Subject 15 characters 30 characters Mail address − 50 characters Main body 5,000 characters...
  • Page 180 Other Features ●Mail with file attachment Mail with melody file attachment You can send/receive i-mode mail attached with a melody file downloaded from a site or Internet website. (You cannot send a melody file prohibited from being used as a mail attachment or retrieved out of the FOMA terminal.) •...
  • Page 181 ●i-motion mail You can send/receive mail with a movie file attachment recorded using an i-motion mail compatible terminal and with a movie downloaded from a site to/from i-motion mail compatible terminal, PC, and other company’s mobile phone. (You cannot send a movie file prohibited from being used as a mail attachment or retrieved out of the FOMA terminal.) •...
  • Page 182 • Receiving SMS (P.209) • Checking new SMS (P.209) • See DoCoMo’s website to send/receive SMS to/from an overseas telecommunications company other than DoCoMo. Number of Characters You Can Send/Receive The number of characters that can be sent/received by SMS is indicated in the table below.

  • Page 183: Displaying The Mail Menu

    Displaying the Mail Menu Press (Mail) in the stand-by display. Menu name Function Ｍａｉｌ ｓｈｏｒｔｃｕｔ Inbox Display, reply to or forward received mail (P.196). Ｉｎｂｏｘ Ｏｕｔｂｏｘ Outbox Display, forward or edit sent mail (P.196). Ｄｒａｆｔ Draft Display mail that was saved without being sent and sent Ｃｏｍｐｏｓｅ ｍｅｓｓａｇｅ...
  • Page 184 ● When the number of saved draft mail has reached 50 or there is not enough memory left for draft mail, you cannot compose new mail nor edit draft mail. ● If new mail is sent when the number of saved sent mail has reached 500 or there is not enough free space, the unprotected sent mail is overwritten from the oldest.

  • Page 185: Composing And Sending Deco-Mail

    Composing and Sending Deco-mail You can compose and send Deco-mail, i-mode mail that has a decorated main body. • Deco-mail may not be received or displayed correctly depending on the recipient’s terminal model. Main body input display Preview display Icons for the Ｉｎｐｕｔ ｔｅｘｔ...
  • Page 186 Press (Send). To save the composed Deco-mail as a template From the Function menu, select [Save template] → [Yes]. The Deco-mail is saved in Templates. ● Even if you delete a decorated character, the data used for decoration may not be erased and the number of characters in the mail main body that you can enter could be reduced.
  • Page 187 Enter the main body. Enter text within 5,000 full-width or 10,000 half-width characters. • Number of characters permitted in the main body may be reduced depending on the type and volume of decoration you use. Specifying Decoration After Entering the Main Body Press (Func) in the main body input display.

  • Page 188: Using A Template To Send Mail

    Using a Template to Send Mail A template is a model used for Deco-mail, which is preset with decorations for the main body. You can use templates to easily compose/send Deco-mail. You can download a template from a site and also save up to 50 composed/received/sent Deco-mails as templates (P.184).

  • Page 189: File Attachment

    File Attachment You can send i-mode mail with a still image and melody attachment. You can also send i-motion mail with a movie/i-motion attachment. ■Files that can be attached Size Maximum number Type Format Restrictions restriction of attached files ・ An i-mode terminal for the Mova service cannot Image JPEG, 10,000 bytes...

  • Page 190: Saving I-Mode Mail To Send Later

    Compose mail and send it. • Follow the same steps as in the Compose and send mail (P.181, step 2 to 5). • The number of characters that you can enter in the mail main body varies depending on the size of the file attachment.

  • Page 191: Receiving I-Mode Mail

    Receiving i-mode Mail When mail is sent to the i-mode center, the FOMA terminal automatically receives them. While receiving mail, “ ” flashes.   Ｒｅｃｅｉｖｉｎｇ ｍａｉｌ When receiving is completed, “ ” is displayed, the indicator flashes, the Ｕｎｒｅａｄ ｍａｉｌ／ｍｅｓｓａｇｅ ring tone sounds, and the number of received mail is displayed. The display before receiving reappears after about 15 seconds.

  • Page 192: Selecting To Receive I-Mode Mail

    Selecting to Receive i-mode Mail You can check through mail held at the i-mode center, where you can select mail to receive and delete mail without receiving it based on the information such as mail subject. • To use this function, set the Receive option setting [ON]. When the Receive option setting is [ON], i-mode mail is not received automatically (P.204).

  • Page 193: Checking New I-Mode Mail

    Checking New i-mode Mail New mail held at the i-mode center while the FOMA terminal is powered off or outside of the i-mode service area can be checked. • Depending on the radio wave condition, you may not be able to check new mail. Press (Mail) for over a second in the stand-by display.

  • Page 194: Forwarding I-Mode Mail

    Forwarding i-mode Mail You can forward received mail to another person. A file attachment is also forwarded. Example: Forwarding received mail From the received mail list, select mail and press (Func). The Function menu appears. Select [Forward] and press The Edit mail display appears. “Fw: title of the received mail”...

  • Page 195: Saving The Mail Address/Phone Number In The Phonebook

    Saving the Mail Address/Phone Number in the Phonebook Saving the Sender’s/Recipient’s Mail Address in the Phonebook You can save the mail address of a received mail sender and recipient or sent/saved mail recipient in the Phonebook. Example: Saving the mail address of a received mail sender to the FOMA terminal phonebook as a new entry From the received mail list, select mail, press , and press...

  • Page 196: Playing Back/Saving A File Attachment Received In I-Mode Mail

    Saving the Phone Number/Mail Address in Display in the Phonebook The mail addresses or phone numbers currently displayed in the site or received mail/ sent mail can be saved in the Phonebook. • Depending on the site, the displayed phone number or mail address may not be saved. Example: Saving the phone number contained in the main body of the received mail to the FOMA terminal phonebook as a new entry From the received mail list, select mail and press...
  • Page 197 Example: Saving a file attachment received in mail From the received mail list, select mail and press Select a file attachment and press (Func). The Function menu appears. To play back/save a movie/i-motion attachment Select a URL in the main body to obtain its movie/i-motion. Select [Save attached] →...

  • Page 198: Displaying Received/Sent/Saved Mail

    Displaying Received/Sent/Saved Mail You can display received/sent/saved mail any time you want. Received mail and sent mail are saved in [Inbox] and [Outbox] respectively, and mail saved without being sent or sent unsuccessfully is saved in [Draft]. • [Inbox], [Outbox], and [Draft] accommodate up to 1,000 received mails, up to 500 sent mails, and up to 50 saved mails respectively.

  • Page 199: Phone Numbers

    File attachment type With image attachment exceeding 10,000 bytes With melody attachment With image attachment With i-αppli To With movie attachment (Sent/saved mail only) To display mail addresses or phone numbers When saved in the Phonebook, the name is displayed instead of the mail address/phone number.
  • Page 200 Adding/Deleting Folders In addition to [Inbox]/[Outbox], you can create up to 20 folders each to manage received and sent mail. Besides these folders, additional five folders are reserved for i-αppli with mail each in [Inbox]/[Outbox]/[Draft]. You can also change a folder name or sort the folders. •...
  • Page 201 Moving Mail to a Different Folder You can move received/sent mail to another folder using three methods. Example: Moving received mail From the Mail menu, select [Inbox] → a folder and press To move all mail in a folder From the Function menu, select [Move] → [Move all] → [Yes] → a folder. To move several mails From the Function menu, select [Move] →...

  • Page 202: Deleting Mail

    Deleting Mail You can delete the received or sent mail using the following six methods. Delete one Delete a mail in the folder. Select&delete Delete several mails in a folder. Up to 30 mails can be selected at a time. Delete read msg (for received mail only) Delete all read mail.
  • Page 203 Select [Brows mail mode] and press The i-αppli mail can be displayed as regular mail. Checking the Number of Mail Saved The number of mail saved can be checked for each folder. Example: Checking the number of received mail saved From the Mail menu, select [Inbox] and press Select a folder and press (Func).

  • Page 204: Setting The Mail Function Of The Foma Terminal

    Select the sorting method at [Sort method]. [Mail address] : Specify a mail address. The mail address portion after the @ mark is required. However, when you set the mail address to “phone number@docomo.ne.jp”, enter the phone number only. [Group] : Specify a group.
  • Page 205 ● If mail satisfies several sorting requirements, the sorting requirement with a lower number in the list has higher priority. If you set [None] for sorting requirement, the sorting requirements lower than the number you set become invalid, and mail is sorted to the folder for which [None] is set. ●...
  • Page 206 Setting the Type of Mail/Message to be Checked Default Mail・MessageR・MessageF: Valid You can set whether to receive mail, Message R, and Message F when making inquiries to the i-mode center. Example: Setting the i-mode inquiry set for mail From the Mail menu, select [Mail setting] → [Common setting] → [i-mode inquiry set] and press ｉ−ｍｏｄｅ ｉｎｑｕｉｒｙ ｓｅｔ...
  • Page 207 Setting a Mail List By saving mail addresses in a mail list, you can send mail to all members in the list at the same time. Up to 10 mail lists can be saved. Up to five mail addresses can be saved in each mail list. From the Mail menu, select [Mail setting] →...
  • Page 208 Playing a Melody Automatically from Mail Default Auto play The melody can be set to be played back automatically when displaying mail or message. From the Mail menu, select [Mail setting] → [Common setting] → [Melody auto play] and press Select [Auto play]/[OFF] and press The Melody auto play is set.
  • Page 209 Enabling the Receiving of a File Attachment Default Attached file: Accept all/Image・Melody: Accept You can set whether to receive an image or melody attachment in i-mode mail. From the Mail menu, select [Mail setting] → [Attached file set] and press Select [Accept all]/[Accept slected]/[Reject all] at [Attached file].

  • Page 210: Composing And Sending Sms (Short Message Service)

    FOMA terminals. • You can exchange SMS with recipients/senders who subscribe to an overseas telecommunications company other than DoCoMo. See the NTT DoCoMo website for information about countries and overseas telecommunications companies you can use for sending/receiving SMS. • Even when the Notify caller ID is set to [Not notify], an SMS recipient is notified of the sender’s phone number.

  • Page 211: Receiving Sms (Short Message Service)

    Receiving SMS (Short Message Service) The FOMA terminal automatically receives SMS. You can save up to 1,000 received SMS including i-mode mail in [Inbox]. While receiving SMS, “ ” flashes.   Ｒｅｃｅｉｖｉｎｇ ＳＭＳ When SMS reception is completed, “ ” is displayed, the incoming Ｕｎｒｅａｄ ｍａｉｌ／ｍｅｓｓａｇｅ...

  • Page 212: Setting Sms (Short Message Service)

    Setting SMS (Short Message Service) Default Language: JPN/SMS report: Invalid/Validity: 3 days/SMSC: DoCoMo/ Type of Number: International/Address: 81903101652 ※ Normally, you do not need to change the SMSC, Type of Number, and address settings. From the Mail menu, select [Mail setting] → [SMS setting] and press...
  • Page 213 i-αppli What is i-αppli? ........................212 Downloading i-αppli from a Site ..................213 Running i-αppli ....................<Run i-αppli> Running i-αppli Automatically ................<Auto start> Setting i-αppli for the Stand-by Display ............ <i-αppli stand-by> Managing i-αppli ......................... 218 Using Various i-αppli Functions ..................220...

  • Page 214: What Is I-Αppli

    What is i-αppli DX? What is i-αppli? i-αppli DX enables you to enjoy i-αppli more conveniently By downloading i-αppli from its site, the i-mode by working in conjunction with the i-mode terminal compatible FOMA terminal (hereinafter referred to as information (mail, Redial/Received record, Phonebook, i-mode terminal) can be made more useful in many ways.

  • Page 215: Downloading I-Αppli From A Site

    Other Features Downloading i-αppli from a Site ● i-αppli stand-by display • Up to 100 i-αppli software can be saved. The number of i-αppli i-αppli stand-by display enables you to set i-αppli for the software that can be saved varies between 10 and 100 stand-by display and to receive mail or place a call from depending on the size of each i-αppli software to be saved.

  • Page 216: Running I-Αppli

    ● Running i-αppli If you have deleted preinstalled software, you can download it from “SO@Planet”. [i Menu] → [メニューリスト] → [ケータイ電話メーカー] → [SO@Planet] i-αppli software can be set to run manually. ● The message “Terminal and UIM ID will be sent” may Press (i-mode) for over a second in the stand-by appear when downloading.
  • Page 217 Setting i-αppli Operating Conditions ● The sound from running i-αppli software is heard at the same volume level as set for the incoming call ring volume. It is heard at the volume level 3 when you set [STEP DOWN] • It may not be possible to change some items of the saved or [STEP UP] for the incoming call ring volume.
  • Page 218 ● ケータイポストペット for SO Preinstalled Software Default settings of the preinstalled software are indicated in the table below. Item Default setting Stand-by display No image Auto start User set ©SCN SW set Invalid NW setting This is i-αppli with mail software in which a pet delivers Stand-by NW setting mail for you.

  • Page 219: Running I-Αppli Automatically

    Enter the date/time/day of the week. Running i-αppli Automatically • Enter the date/time/day of the week according to the style of the auto start time selected in step 4. Enabling/Disabling Auto Start Press (Complete). Select [SW set] and press Default The SW set display appears.

  • Page 220: Setting I-Αppli For The Stand-By Display

    Setting i-αppli for the Stand-by Managing i-αppli Display Upgrading i-αppli Only one supporting software can be set for the i-αppli stand-by display. The software that supports the i-αppli The software saved in the FOMA terminal can be stand-by display is identified by “ ”.
  • Page 221 Moving i-αppli to a Different Folder Checking Error History and Trace Result You can move software to a different folder using three The error histories for the i-αppli stand-by display and methods. the results output by the i-αppli trace feature can be displayed.

  • Page 222: Using Various I-Αppli Functions

    Using Various i-αppli Functions Using the Camera Function from i-αppli You can use the camera function (P.124) from the software running on the FOMA terminal. • Images are used and saved in the software. • Items that can be set and the startup procedure of the camera vary depending on the software.
  • Page 223 i-Channel What is i-Channel? ......................222 Displaying the i-Channel ..................... 223...
  • Page 224 There are two types of channels: “Basic channel” and What Is i-Channel? “Favorite channel”. “Basic channel” is provided by DoCoMo and is pre-registered, and therefore you can use The i-Channel service provided by DoCoMo or another it from the moment you start using the i-Channel service.
  • Page 225 Displaying the i-Channel When You Receive i-Channel When you receive information, the Press (i.ch) in the stand-by display. information is automatically run as Telop text in the stand-by display. To display the channel list Press (i.ch).  →  最高２０℃  １０ Telop The channel list appears. ●...
  • Page 227 Displaying/Editing/ Managing Data ■Using Still Image Displaying the Saved Image ................<My picture> Editing Still Images ..................<Edit photo> ■Using Movie Playing Back Movie/i-motion ................<i-motion> Editing Movie ....................<Edit movie> ■Using Chara-den What is Chara-den? ..................<Chara-den> ■Using the Melody Playing Back a Melody ..................

  • Page 228: Displaying The Saved Image

    Select an image and press Displaying the Saved Image You can display images saved in My picture of the Data box of the FOMA terminal or the “Memory Stick Duo”. Press ) in the stand-by display, select [My picture], and press My picture folder list appears.

  • Page 229: Editing Still Images

    Displaying Images as a Slideshow Adding a Frame Default Interval: 3 sec/Direction: V A frame can be added to an image of [sQCIF(128×96)], [QCIF(176×144)], [Stby(240×320)], and [CIF(352× JPEG images saved in My picture can be displayed by 288)]. switching them automatically. Example: Adding a frame and saving by overwriting Press (Func) in My picture file list.

  • Page 230: Adding Text

    Adding Text Trimming Part of an Image After Zoom In Text can be added to an image of [sQCIF(128×96)], You can specify a part of an image after zooming in on it [QCIF(176×144)], [Stby(240×320)], and [CIF(352× and trim it into a size of [sQCIF(128×96)], [QCIF(176× 288)].

  • Page 231: Playing Back Movie/I-Motion

    Select a folder and press Rotating an Image Ｃａｍｅｒａ     １／８ Management title Ｆｌｏｗｅｒｓ ａｎｄ ｃ An images of [sQCIF(128×96)], [QCIF(176×144)], Ｏｎｅ ｅａｒｌｙ ａｆｔ [Stby(240×320)], [CIF(352×288)], and [VGA(480× 640)] can be rotated. Ｃｈｕｍｍｙ ｔｗｏ Example: Rotating an image and saving by overwriting Ｉｔ ｌｏｏｋｓ ｂｉｇ From My picture file list, select an image, press The i-motion file list appears.

  • Page 232: Editing Movie

    Select a movie/i-motion and press Editing Movie You can edit a movie recorded with the FOMA terminal. Clipping a Still Image from a Movie You can save a paused movie image as a still image. The selected movie/i-motion appears. From the i-motion file list, select a movie, press To turn off the icons and guide display of the display Press (Display).

  • Page 233: What Is Chara-Den

    Select [Attach to mail(S)]/[Attach to mail(L)] and What is Chara-den? press You can send an avatar of your choice instead of your own image when you use the videophone function. You can make this avatar move by pressing the keys on the keypad.

  • Page 234: Playing Back A Melody

    Displaying and Operating Chara-den Playing Back a Melody You can display Chara-den characters saved in the You can play back a melody saved in Melody of the Data Chara-den folder of the Data box. box of the FOMA terminal and in Melody of the “Memory Press ) in the stand-by display, select [Chara- Stick Duo”.

  • Page 235: Melody

    Stick] and press keep it separately in a safety place. Under no condition will Ｍｅｍｏｒｙ Ｓｔｉｃｋ DoCoMo be held liable for any loss or modification of the data.  Ｍｙ ｐｉｃｔｕｒｅ  ｉ−ｍｏｔｉｏｎ The FOMA terminal cannot use the “Memory Stick Duo”...

  • Page 236: Folder Setup Of The "Memory Stick Duo

    When you copy data of the FOMA terminal to the “Memory Stick Duo”, a corresponding folder is created automatically. “Memory Stick Duo” DCIM nnnMSDCF DSC0nnnn.JPG ....... DCF standard still image file (JPEG image) MOBILE DOCOMO NAMECARD CARDnnnn.VCF ....... Phonebook file MESSAGE OUTBOX SENDnnnn.VMG ...... Sent mail file SAVEBOX SAVEnnnn.VMG .......

  • Page 237: Data That Can Be Written/Read To And From The "Memory Stick Duo

    Data That Can Be Written/Read to and from the “Memory Stick Duo” • It may take time to save data depending on the data size. • Data saved from the “Memory Stick Duo” may not be displayed/played back properly. Data you can/ Data you can/cannot cannot save from save from the...

  • Page 238: Copying/Moving Data From The Foma Terminal To The "Memory Stick Duo

    Select data and press (Func). Copying/Moving Data from the FOMA The Function menu appears. Terminal to the “Memory Stick Duo” Select [Save to main] and press The Security code screen appears. You can copy the FOMA terminal phonebook, Text memo, Enter the Security code and press (OK).

  • Page 239: Managing The "Memory Stick Duo

    Example: Copying data from the FOMA terminal phonebook to Managing the “Memory Stick the UIM phonebook Duo” From the FOMA terminal phonebook, select data and press (Func). The Function menu appears. Formatting the “Memory Stick Duo” To copy several data From the Function menu, select [Copy to UIM] →...

  • Page 240: Managing Data Box

    Example: Displaying the file list in the [Preinstall] folder in My Managing Data Box picture Press ) in the stand-by display. Data handled by the FOMA terminal, such as downloaded Ｄａｔａ ｂｏｘ data and data recorded using the camera, are saved in  Ｍｙ ｐｉｃｔｕｒｅ...

  • Page 241: Deleting Data

    Adding/Deleting Folders Deleting Data You can create or delete a folder for saving data. You You can delete data using three methods. can add up to 10 folders by category. You can also • You cannot delete preinstalled data other than Chara-den files. change the name of a folder.
  • Page 242 Displaying/Editing Data Information Setting How to Display a List of Images You can change the data management title and file name, Default 4 images and set file restrictions. The management title is displayed You can select the display style of My picture and i-motion in the file list.
  • Page 243 (DoCoMo shop, etc.) when the FOMA terminal is replaced due to a trouble or some other reason. • Please note that DoCoMo shall not be liable if your data cannot be transferred or if the data is lost or altered. Replay restriction −...

  • Page 244: Checking The Memory Of The Foma Terminal

    Select a folder → software and press Checking the Memory of the ソフト一覧    １／１２ ソフト一覧    １／１２ FOMA Terminal  ＸＸＸ ｇａｍｅ  ＸＸＸ ｇａｍｅ   ＸＸＸ ｑｕｉｚ   ＸＸＸ ｑｕｉｚ  Ａｑｕａ ＸＸＸ ｆｒｉｅｎｄ  Ａｑｕａ ＸＸＸ ｆｒｉｅｎｄ  ＸＸＸ Ｓａｎｇｕｏｚｈｉ  ＸＸＸ Ｓａｎｇｕｏｚｈｉ You can display the memory use status of the FOMA Ｕｓｅｄ（Ｄａｔａ）   ６４ＫＢ Ｕｓｅｄ（Ｄａｔａ）   ６４ＫＢ terminal. You can also check the volume used up by the Ｓｈｏｒｔａｇｅ    ６４ＫＢ...

  • Page 245: Data That Can Be Sent/Received Via Infrared Communications

    Data That Can Be Sent/Received via Infrared Communications You can send and receive your Own number, Phonebook, Schedule, Text memo, Bookmark, mail, image, movie, and melody between mobile phones and other devices equipped with the infrared communications function. • It may take time to exchange or save data depending on the data size. •...

  • Page 246: Receiving Data Using The Infrared Communications

    Receiving Data Using the Sending Data Using the Infrared Communications Infrared Communications Receiving Data Sending Data From the Menu, select [Tools] → [Rcv Ir Data] → Select data to be sent and press (Func). [Receive] and press The Function menu appears. “...

  • Page 247: Using The Infrared Remote Control

    Using the Infrared Remote Control Once infrared remote control software is downloaded from a site and saved in the FOMA terminal, the FOMA terminal can be used as the TV or VCR remote control. • To use the infrared remote control, it is necessary to download the software corresponding to the target equipment.
  • Page 249 Other Useful Functions Multiaccess Feature ..................<Multiaccess> Multitask Feature ....................<Multitask> Starting the Alarm at a Specified Time ..............<Alarm> Saving Schedules ..................... <Schedule> Performing Frequently Used Functions Quickly ........... <My Selection> Recording Recipient’s or Your Own Voice ............ <Voice memo> Checking the Call Duration and Charge ..........

  • Page 250: Multiaccess Feature

    Placing a Voice Call during i-mode/Packet Multiaccess Feature Communications Multiaccess is a function that enables you to use a voice Example: Placing a voice call during i-mode call, packet communications, and SMS functions at the Press (MENU) during i-mode or packet commu- same time.

  • Page 251: Multitask Feature

    Activating a New Function Multitask Feature Press (MENU) during the activation of a function. Multitask is a function that enables you to perform several functions at the same time, each of which you can access by switching the displays. • For multitask combinations, see P.296. Using the Display during the Multitask Operation From the Menu, select a new function and press...

  • Page 252: Starting The Alarm At A Specified Time

    Select an alarm tone from Melody/i-motion of the Starting the Alarm at a Data box at [Alarm]. Specified Time • You can set a melody in the SMF/MFi format from Melody and an i-motion with sound track only or with video and sound tracks of an image size of [sQCIF(128×96)]/ Default Select alarm・Auto power on: OFF/...

  • Page 253: Saving Schedules

    Enter a starting time at [ ]. At the Alarm Time Enter a time in 24-hour format. To set the schedule period to all day The alarm tone sounds for about one minute with the Select [ON] at [All day]. When it is set to [All day], you indicator flashing.
  • Page 254 Set the volume at [Alarm volume]. ● If the schedule set for the 31st is set to the [Month] repeat Select from [OFF] and [1 to 5]. type, the schedule is set for the last day of the month for months with less than 31 days.
  • Page 255 Select the schedule and press Setting Holiday Ｓｃｈｅｄｕｌｅ ｄｅｔａｉｌ  ２００６／０７／０１ Ｓａｔ Default For today: holidays specified by the National Holidays Law/  １２：００ Day of the week: Sunday  ２００６／０７／０１ Ｓａｔ  １２：５０ You can set a day or a day of the week as a holiday and  Ｌｕｎｃｈ ｍｅｅｔｉｎｇ...

  • Page 256: Performing Frequently Used Functions Quickly

    Checking the Number of Schedules Recording Recipient’s or Your Saved Own Voice The number of schedules saved can be checked as well Your own voice during stand-by and the recipient’s voice as the number of schedules still available to be saved or during a voice call can be recorded.

  • Page 257: Checking The Call Duration And Charge

    Resetting the Total Call Duration and Checking the Call Duration Charge and Charge The display of the total call duration and charge can be Default Last call cost - Voice call・Digital: reset. The count starts from 0 after the reset. Last call duration - Voice call・Digital: 0:00 Total call cost - Total cost: 0YEN/ Example: Resetting the total call duration...

  • Page 258: Using The Calculator

    Enter the Security code and press (OK). Using the Calculator Ｃａｌｌ ｃｏｓｔ ｌｉｍｉｔ Ｓｅｔ      ＯＦＦ Ｌｉｍｉｔ The FOMA terminal has a calculator that can perform         ０ＹＥＮ basic operations (addition, subtraction, multiplication,     （１０−１０００００） Ｎｏｔｉｆｉｃａｔｉｏｎ and division).   Ａｌａｒｍ＋Ｓｔａｎｄ−ｂｙ Example: Calculating 64×5 From the Menu, select [Tools] → [Calculator] and press Select [ON]/[OFF] for the Call limit notice at [Set].

  • Page 259: Displaying The Settings Of Various Functions

    From the Menu, select [Settings] → [Application] and Displaying a Memo press Ａｐｐｌｉｃａｔｉｏｎ The contents of a saved memo can be checked. Ｍａｉｌ ｉ−ｍｏｄｅ From the Menu, select [Tools] → [Text memo] and   ｐｐｌｉ press Ｐｈｏｎｅｂｏｏｋ Ｃａｌｌ ｒｅｃｏｒｄ Ｔｅｘｔ ｍｅｍｏ ｌｉｓｔ １／５ Ｒｅｃｏｒｄ ｍｓｇ  Ｃａｍｐｉｎｇ ｉｓ ｓｃｈｅｄｕ Ｓｃｈｅｄｕｌｅ...

  • Page 260: Using The Switched Earphone Mic

    Placing a Call Using i-mode Mail Using the Switch to Receive a Call You can easily place a voice or videophone call from When receiving a call, press the switch on the mail when the mail address and phone number of the Earphone Mic for over a second.

  • Page 261: Receiving Answer Canswerll Automanswerticanswerlly With Eanswerrphone

    Receiving a Call Automatically Deleting All Saved Data with Earphone You can delete saved data and reset the settings of each function to the default settings. For the functions to be Default Set: OFF/To answer: 5 sec reset by the Delete all data, see the list of reset items You can set to automatically answer a voice or video- (P.260) and the list of menus (P.278).

  • Page 262: List Of Reset Items

    List of Reset Items The items in which settings, that are made through the associated Function menus, etc., are reset by executing the Reset settings or Delete all data are as follows. For functions that can be accessed through the menu display, see the list of menus (P.278).
  • Page 263 Network Services This manual provides a brief description of each Network Service using the approach of operating from the menu of the FOMA terminal. For detailed information on operation of the Network Services, see the “Network Services Operation Guide”. Also, see the “Multi Number Operation Guide” for information on the Multi Number Service.

  • Page 264: Available Network Services

    Contact” on the backcover of this manual. Check messages Check whether you have new messages • When DoCoMo adds and provides a new network service, you at the Voice Mail Service Center. can save the new service in the menu (P.266).

  • Page 265: Using The Call Waiting Service

    From the Menu, select [NW Services] → [Call Notes on the service for the videophone ※ Forwarding] and press ● When the Voice Mail Service takes a videophone message for you, it is notified to you by SMS. Set each item. ●...

  • Page 266: Using The Caller Id Display Request Service

    [Switch Dual Network] → Enter the • Depending on the UIM in use, the request numbers indicated network security code → [Yes] → by the DoCoMo representative of Contact for Repair and the [Check status] → Check status DoCoMo information desk of General Contact may be different or may not be displayed.

  • Page 267: Selecting An Operation For An Incoming Call During A Call

    Setting Remote Control You can set to be able to operate the Voice Mail or Call Forwarding Service, etc. from a general push-button telephone, public phone, DoCoMo mobile phones, etc. From the Menu, select [NW Services] → [Remote Control] and press Set each item.

  • Page 268: Saving A New Service To Use It

    You can save up to 10 services in the menu when a new ● The Multi Number call is set to Ｃａｌｌｉｎｇ network service is added by DoCoMo. [ON] and a phone number se- lected from the Call menu is dis- Ａｄｄｉｔｉｏｎａｌ Ｎｏ．１       ０９０ＸＸＸＸＸＸＸＸ...
  • Page 269 Data Communication For detailed information on Data Communications, see the “Manual for Data Communication” (PDF format) included in the supplied CD-ROM. You need Adobe Reader (Version 6.0 or later is recommended) to read the “Manual for Data Communication” (PDF format). If this software is not installed on your PC, download the latest version from the Adobe Systems Incorporated website.
  • Page 270 • The FOMA terminal does not support FAX communications. directly to the Internet service provider. For details about • If you are going to connect the FOMA terminal to DoCoMo’s usage fees, contact your Internet service provider. “sigmarionⅡ” or “musea” PDA to perform data communica- tions, you should update “sigmarionⅡ”/“musea”.
  • Page 271 ■ Definition of terms Access Authentication for the Use of a Browser ● Administrator An administrator is authorized access to all Windows XP and When a FirstPass-compatible site that you access through Windows 2000 Professional systems. At least one user with the Internet browser on your PC requires the FirstPass (user Administrator privilege is set for each PC.
  • Page 272 ■ Operating environment of communication configuration Preparations and Flow of Data files (drivers)/FOMA PC setup software Communications Item Required environment PC main unit※1 PC/AT-compatible OS※2 Windows 98, Windows Me, The preparations required for performing packet and 64K Windows 2000 Professional, data communications by connecting the FOMA terminal Windows XP (All Japanese versions) to a PC are given below.
  • Page 273 Entering Text About Entering Text ......................272 Entering Text ........................272 Entering Common Phrases ....................274 Entering Pictographs/Symbols ................... 274 Editing/Saving Common Phrases ............ <Edit common phrases> Quoting Data from the Phonebook, etc................274 Cutting/Copying/Pasting Text ....................275 Entering Text Using Kuten Codes ..............<Input kuten>...

  • Page 274: About Entering Text

    ■ Entering a character assigned to the same key twice About Entering Text or more in succession After entering the first character, move the cursor. The overview of the text entry is described here. ■ Deleting a character • Characters including JIS level 1 and level 2, 6,355 kanji are available.
  • Page 275 Press three times and press five times. Press Ｉｎｐｕｔ ｔｅｘｔ ｍｅｍｏ Ｉｎｐｕｔ ｔｅｘｔ ｍｅｍｏ けんと 検討 けんと 検討 健闘 剣道 検討 健闘 見当 拳闘 見当 県道 ケント 県と けんとう ケントウ 件と 券と 権と 健と ケントウ 謙と 憲と 建と 研と The characters “んと” are entered and the matching words The first conversion target word appears. list for “けんと” is displayed. To finalize this word To set the User conversion mode temporarily Press (Select).

  • Page 276: Entering Common Phrases

    Entering Common Phrases Editing/Saving Common Phrases Default See the list of common phrases (P.288) For common phrases, see P.288. • Common phrases that are available vary depending on the The preinstalled common phrases can be edited accord- contents to be edited. Unavailable categories are disabled for ing to the intended use.

  • Page 277: Cutting/Copying/Pasting Text

    Pasting Text Cutting/Copying/Pasting Text Select the position to paste in the text input display The entered characters can be pasted to the other input and press (Func). display by cutting or copying. Use this function when The Function menu appears. you enter i-mode text or compose mail.

  • Page 278: Resetting To The Default Settings

    Example: Saving a word in the Prediction dictionary Using the Downloaded Dictionary From the Menu, select [Settings] → [Application] → [Input method] → [Edit prediction] and press Up to 20 dictionaries can be downloaded using i-mode The Prediction dictionary display appears. for use with the FOMA terminal.
  • Page 279 Appendix/ External Device Interface/ Troubleshooting List of Menus ........................278 Characters Assigned to Keys ..................... 285 Special Symbols ......................... 286 Pictographs ......................... 286 Face Marks ......................... 287 Common Phrases ....................... 288 Preinstalled Images ......................289 Deco-mail Templates ......................290 Kuten Codes ........................291 Multiaccess Combinations ....................

  • Page 280: List Of Menus

    Sort inbox Sort method/Sort to folder: ● P.202 None SMS setting Language P.210 SMS report Invalid Validity 3days SMSC DoCoMo Type of Number International Address 81903101652 ○ ○ Rcv opt setting P.204 ○ ○ Attached file Attached file Accept all P.207...
  • Page 281 P.172 Sound effect ○ ○ P.91 ○ ○ Auto-display Prefer msgR P.165 SSL list CA certify Valid ○ ○ P.168 DoCoMo cert.1 Valid ○ ○ DoCoMo cert.2 − − User certificate P.168 ドコモ ○ ○※3 Host selection P.170 − ●...
  • Page 282 Reset Delete Menu Default Setting Page settings all data − ●※4 Data box My picture P.226 − ●※4 i-motion P.229 Melody − ●※4 P.232 Chara-den − ●※4 P.232 Settings Display Stand-by Stand-by display Pattern ○ ○ P.95 ○ ○ Ticker ○...
  • Page 283 Reset Delete Menu Default Setting Page settings all data ○ ○ Settings Call Missed call P.101 ○ ○ Videophone Display setting Main-Other side P.74 Set outgoing image Camera image: ON, ○ ○ P.74 Substitute image: ブンブン （Dimo） Visual preference Normal ○...
  • Page 284 Reset Delete Menu Default Setting Page settings all data Settings Lock/ Lock all P.109 Security ○ ○ Remote lock P.109 Monitoring 3min ○ ○ Times 5Count ○ ○ List − ○ PIM lock P.111 ○ ○ Secret display P.113 ○ ○...
  • Page 285 Reset Delete Menu Default Setting Page settings all data − NW Services Voice Mail Activate P.262 − Set ring time Deactivate − Check setting − Play messages − − Voice Mail setting − Check messages ○ ○ Tone/Vibrate notice Delete VM icon −...

  • Page 286: Simple Mode

    Reset Delete Menu Default Setting Page settings all data − NW Services English Guidance setting P.264 Guidance − Check setting Service ドコモ故障問合せ (Contact for Repair) − P.264 Numbers ドコモ総合案内 ・ 受付 (General Contact) − Additional Register USSD Service: Unsaved, USSD: − ○...

  • Page 287: Characters Assigned To Keys

    Characters Assigned to Keys Character mode Kanji/Hiragana mode Katakana mode Alphabetic mode Numeric mode Keys ア イ ウ エ オ あ い う え お . @ ／ ： − ∼ ぁ ぃ ぅ ぇ ぉ ァ ィ ゥ ェ ォ か...

  • Page 288: Special Symbols

    Special Symbols • Symbols marked with ■ may not be displayed correctly when sending to i-mode non-compatible mobile phones or PCs. ■Full-width symbols ■Half-width symbols Pictographs • Pictographs are not displayed correctly when sending to i-mode non-compatible mobile phones or PCs. •...

  • Page 289: Face Marks

    Face Marks When you enter the following words in the kanji/hiragana mode, Kao moji (face marks) are entered. • Some face marks listed below may look different from the actual ones. ※ Face marks that belong to other than the “かお” category appear only when the Prediction conversion is used. Word Kao moji Word...

  • Page 290: Common Phrases

    Common Phrases Category Common phrase .co.jp .go.jp .ne.jp @docomo.ne.jp  Internet http:// .com .or.jp https:// .ac.jp www.  KAO MOJI1  KAO MOJI2  KAO MOJI3 おはようございます お疲れさまでした おやすみなさい お世話になっております  Greetings 昨日は、 どうもありがとうございました こんにちは 行ってきます こんばんは いってらっしゃい よろしくお願い致します 直行します 本日の会議は中止となりました 直帰します 出欠をご連絡ください  Business 休暇をとります...

  • Page 291: Preinstalled Images

    Preinstalled Images The following images are available on the FOMA terminal at the time of purchase. ■My picture ● Preinstalled モモ＆コモモ Colorful bars Pink pearls Shade light ©SCN Simple patterns Sweet flowers Noble scenery Wild Forest ● [Wild Forest] changes in color and appearance according to the time of day, radio wave condition, and battery level.

  • Page 292: Deco-Mail Templates

    ● Deco-mail picture ©SCN ©BVIG ■i-motion ● Preinstalled Deco-mail Templates イッテラッシャイ！ おめでとう！ ありがとう！ 遅刻します ©SCN ©SCN ©SCN ©SCN ごめんなさい げんき？ 飲み会のお誘い Love Love ©SCN ブンブン1 ブンブン2 ブンブン3 ©BVIG ©BVIG ©BVIG...

  • Page 293: Kuten Codes

    Kuten Codes In the following Kuten code list, a 4-digit kuten code is expressed by the combination of the row for the first three digits and the column for the last digit. Example: When you wish to input “★” (corresponding to kuten code “0190”), locate it in the Kuten code list and determine the kuten code for it from its row (“019”) and column (“0”).

  • Page 297: Multiaccess Combinations

    Multiaccess Combinations The table below indicates whether another event or task is available for each task in progress. • The FOMA terminal may not operate as indicated in the table below depending on its condition. Another event or task Voice V.phone i-mode 64K data...

  • Page 298: Multitask Combinations

    Multitask Combinations The table below indicates whether another function is available for each function in the menu. • The FOMA terminal may not operate as indicated in the table below depending on the status of each function. • The functions marked with ■...

  • Page 299: Services Available On The Foma Terminal

    Phone number Collect Call (fees paid by the recipient of the call) (no area code) 106 Information on ordinary telephone numbers and DoCoMo mobile phones (no area code) 104 (paid) (Phone numbers of customers who declined to disclose their number information are not available.)

  • Page 300: Dual Style Feature

    Dual Style Feature The Dual Style is a name for a set of panels with which you can dress up the looks of your FOMA terminal on both front and rear sides. You can change the supplied Front Cover SO01 and Rear Cover SO02 with an optional Dual Style SO01.

  • Page 301: Optional And Related Devices

    Some accessories are only available in some areas. For details, please contact our service counter (DoCoMo shop, etc.). For details on optional devices, see the user’s manual of each device.

  • Page 302: Introduction Of Data Link Software

    Introduction of Data Link Software You can use “FOMA SO Series Data Link Software” to transfer data such as the Phonebook, mail, Bookmark, and Schedule data between the FOMA terminal and a PC. Use the FOMA USB connection cable (optional) to connect the FOMA terminal with a PC or use the “Memory Stick Duo”.

  • Page 303: Introduction Of Movie Player Software

    Change the file name extension to “.3gp”. From the “Memory Stick Duo”, select [MOBILE] → [DOCOMO] → [MOVIE] folder to save the file. • See P.234 for folder setup of the “Memory Stick Duo”. If the “Memory Stick Duo” does not contain a [MOVIE] folder, create this folder on a PC.

  • Page 304: Troubleshooting

    Troubleshooting First, check whether the software update is necessary for the FOMA terminal. If necessary, perform the software update (P.312). Trouble Cause and Remedy The FOMA terminal cannot be used. • Check if the battery pack is attached properly (P.35). •...
  • Page 305 Trouble Cause and Remedy An image other than that you set is displayed • If multiple images are set for the incoming image for voice/ for an incoming call. videophone call, the image is displayed in the following order of priority (P.80, 83, 89). 1.

  • Page 306: Error Messages

    Error Messages • In some cases, a 3-digit number may be displayed together with a message. This is a DoCoMo own code that DoCoMo displays on the FOMA terminal. Camera function error. Save the data Cannot save because of other tasks and quit the application •...
  • Page 307 Connection failed Could not move • The host number set for the Host • Failed to move data because of selection is incorrect. Restore the error occurrence. Final number exists host number to “iモード”, the de- • The “Memory Stick Duo” contains Could not read fault setting at the time of pur- a file with the maximum number...
  • Page 308 Invalid data. Connection cannot be Menu cannot be displayed established (400) • Failed to display the menu be- • The host number you set for the Keydial locked cause a function that does not Host selection is incorrect. Re- support menu display is ex- •...
  • Page 309 • Failed to attach the signature be- • The PUK code is locked. Contact be located when you tried to ob- cause the total number of char- the nearest DoCoMo shop (P.105). tain a still image exceeding acters in the mail main body and 10,000 bytes.
  • Page 310 Root certificate has expired. Connect? Software failed This certificate is not valid for this URL. Connect? • The certificate of the FOMA ter- • Failed to start the software be- minal is not yet valid or has ex- cause it cannot be checked by •...
  • Page 311 URL exceeds • The UIM contains an error. Con- • The number of SMS saved in the 256 half-width characters (P.153). tact our service counter (DoCoMo UIM has reached the maximum shop, etc.). number. Delete unnecessary SMS Usage is currently restricted.

  • Page 312: Warranty And After Sales Services

    • Malfunction due to use of devices and consumable parts other than those specified by DoCoMo will only be repaired at the owner’s expense, even if the warranty period is still effective.
  • Page 313 ● Note that data you created or data you retrieved or downloaded from sources other than your mobile phone may be changed or lost when you change the model or have repairs done to the mobile phone. DoCoMo shall have no liability for any change or loss of any kind.

  • Page 314: Updating The Software

    ※ No packet communications charge is required for updating software. If the software update is necessary, we inform of it on DoCoMo’s home page and in “お知ら せ＆ヘルプ” (Information & Help) accessible from i Menu. You can use one of the two update types: “Now update” or “Reserve” to update the software.
  • Page 315 From the Menu, select [Settings] → [Management] → [SW Update] and press The Security code screen appears. Enter the Security code and press (OK). • The Security code is masked by “ ”. • The Security code is set to “0000” at the time of purchase. Confirm the messages.
  • Page 316 Updating the Software Immediately (Now update) From the screen for selecting the update type, select [Now update] and press , then press (OK).    ＳＷ Ｕｐｄａｔｅ Ｒｅａｄｙ ｔｏ   Ｄｏｗｎｌｏａｄｉｎｇ ｄｏｗｎｌｏａｄ？ Ｎｏｔｉｃｅ：   Ｃｏｎｎｅｃｔｉｎｇ Ｎｏ ｆｕｎｃｔｉｏｎｓ ａｒｅ ａｖａｉｌａｂｌｅ ｅｘｃｅｐｔ ｒｅｃｅｉｖｅ ｃａｌｌｓ After a while, the software download starts. • When downloading starts, step 2 and step 3 are performed automatically (no need to operate). To cancel the download Press (Cancel) while downloading.
  • Page 317 Reserving a Date/Time for the Software Update (Reserve) If downloading takes too long or the server is congested, you can connect to the server and preset a date/time to start the software update. Example: Reserving the software update on July 11 (Tue) 1:05 a.m. From the screen for selecting the update type, select [Reserve] and press The FOMA terminal connects to the server and displays a list of reservation Ｌｉｓｔ ｏｆ ｃｈｏｉｃｅ...

  • Page 318: Protecting Your Mobile Phone From Harmful Data

    Confirming the Reservation From the Menu, select [Settings] → [Management] → [SW Update] and press The Security code screen appears. Enter the Security code and press (OK). If the software update is already reserved, the reserved information appears. Ａｌｒｅａｄｙ ｒｅｓｅｒｖｅｄ To change the reservation ｆｏｒ...
  • Page 319 When you update the pattern definitions, your mobile phone-specific information (such as model and manufacturer’s serial number) is automatically sent to the server (server for the scanning function under DoCoMo’s supervision). DoCoMo will not use the information sent from your mobile phone for any purposes other than the scanning function.
  • Page 320 ● If the Auto-update setting is set to [Valid], “ ” (Update completed) appears in the stand-by display when the pattern definitions update is completed. If the pattern definitions were not updated successfully, “ ” (Update definitions) appears. Confirm the information by selecting the icon to clear the notification. ●...

  • Page 321: Specifications

    Specifications Product name FOMA SO702i Dimensions 94 × 47 × 23 mm (H × W × D) (Height and depth are of the closed FOMA terminal.) Weight About 103 g (with battery pack attached) Charging time About 130 minutes (with FOMA AC Adapter 01)

  • Page 322: Number Of Saved And Protected Data Items

    “Memory Stick Duo” (P.233). The data may be lost as a result of malfunction, repair, change, or other handling of the FOMA terminal. Under no condition will DoCoMo be held liable for any damaged or lost data saved in the FOMA terminal.

  • Page 323: Sar Certification Information

    SAR Certification Information This model phone FOMA SO702i meets the MIC’s* technical regulation for exposure to radio waves. The technical regulation established permitted levels of radio frequency energy, based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
  • Page 325 Index/Quick Manual Index ........................... 324 Quick Manual ........................332...
  • Page 326 Index Use ........153 White balance ...... 133 Certificates ....147, 168, 214 AC adapter ......... 37 Change mail address ....176 Acpt/Rjct call ......114 Characters assigned to keys ..285 Additional service ..... 266 Cache ........148 Chara-den ........ 231 Add answer wording ...
  • Page 327 Preparations ......270 Edit movie ........ 230 Stand-by err hist ....219 Data link software ....300 Movie clipping ..... 230 Trace result ......219 Date/time ........40 Photo clipping ..... 230 i αppli setting .... 214, 217, 257 DC adapter ......... 37 Select size ......
  • Page 328 Check new messages ..191 i-motion setting ....172 Change tone/img ....215 Clear Recv ranking ....207 Insufficient memory ..... 242 Phonebook/Records .... 215 Clear Send ranking ....207 Move ........239 Saved data ......212 Compose and send ..... 181 Play ........
  • Page 329 Play portion ......232 Functions ......248 Property ....... 240 Multitask ........249 Save to M.S......236 Activate a new function ..249 On hold Send Ir data ......244 Combinations ...... 296 On hold during a call ..... 59 Sort ........
  • Page 330 Cancel PIN lock ....107 Delete ........48 Screen memo Change PIN1 code ....107 Edit mail ....... 257 Delete ........157 PIN1 code setting ....106 Font size ......101 Display ......... 156 Place a call ......... 44 Record display ....113 Edit title ........
  • Page 331 Storage info ......242 Flip fold ........57 Sub-address ....... 52 Hands-free ......44 Supplied and optional accessories UIM ..........33 Holding ........59 ..........24 Copy from FOMA terminal ... 237 Incoming set ......88 Suspend mail ......176 Copy to FOMA terminal ..
  • Page 332 MEMO...
  • Page 333 MEMO...
  • Page 334 Quick Manual Using Quick Manual The Quick Manual on the following pages provides convenient reference. Cut and fold these pages into a booklet and take it with you. ■Cutting the pages Cut the pages along the printed line ( ■Folding the cut pages Fold the pages you cut off along the printed line ( ) as shown in the illustrations below.
  • Page 339 Don’t forget your FOMA terminal or your manners! When you use the FOMA terminal, be careful not to disturb others around you. Set the Public mode in the following cases ●When you are driving Using the FOMA terminal while driving is dangerous because it may interfere safe driving. ※...
  • Page 340 ※ For access from a PC, the “My DoCoMo ID/Password” are required. ※ If you have not yet obtained the “network security code” or “My DoCoMo ID/Password”, or ※ you forget them, call the “General Contact” below. Access to the services may not be available depending on the subscription detail.
  • Page 341 This manual provides instructions on how to install the SO702i communication configuration files (drivers) and FOMA PC Setup Software that are both included in the supplied CD-ROM as well as information necessary for performing data communications on the FOMA SO702i. ■Operations on Windows XP This manual assumes that you use Windows XP Service Pack 2 as your operating system.

  • Page 342: About Data Communications

    • The FOMA terminal does not support FAX communications. directly to the Internet service provider. For details about • If you are going to connect the FOMA terminal to DoCoMo’s usage fees, contact your Internet service provider. “sigmarionⅡ” or “musea” PDA to perform data communica- tions, you should update “sigmarionⅡ”/“musea”.
  • Page 343 ■ Definition of terms Access Authentication for the Use of a Browser ● Administrator An administrator is authorized access to all Windows XP and When a FirstPass-compatible site that you access through Windows 2000 Professional systems. At least one user with the Internet browser on your PC requires the FirstPass (user Administrator privilege is set for each PC.

  • Page 344: Preparations And Flow Of Data Communications

    ■ Operating environment of communication configuration Preparations and Flow of Data files (drivers)/FOMA PC setup software Communications Item Required environment PC main unit※1 PC/AT-compatible The preparations required for performing packet and 64K OS※2 Windows 98, Windows Me, Windows 2000 Professional, data communications by connecting the FOMA terminal Windows XP (All Japanese versions) to a PC are given below.

  • Page 345: Installing The Communication Configuration Files (Drivers)

    Installing the Communication Configuration Files (Drivers) A user with Administrator privilege can install the software. Set “FOMA SO702i CD-ROM” in the CD-ROM drive To connect the FOMA terminal to a PC using the FOMA of the PC. USB connection cable (optional) and perform data...
  • Page 346 ジャ]. When using Windows 98 When using Windows Me or Windows 98 Click the [デバイスマネージャ] tab. Set “FOMA SO702i CD-ROM” in the CD-ROM drive Click each device and confirm the name of the installed of the PC. driver. Connect the FOMA terminal to the PC using the FOMA...

  • Page 347: Setting Communications Using The Foma Pc Setup Software

    Example: When using Windows XP Set “FOMA SO702i CD-ROM” in the CD-ROM drive ● When you failed to install the software or [FOMA SO702i USB] does not appear on the window in step 2, reinstall of the PC. the software after uninstalling it by clicking [スタート] →...
  • Page 348 Select [NTT DoCoMo FOMA PC設定ソフト] and click [変更と削除]. When using Windows 2000 Professional To change the installation destination Select [NTT DoCoMo FOMA PC設定ソフト] and click [変 Click [参照], specify the desired installation destination, 更/削除]. and click [次へ]. When using Windows Me or Windows 98 Select [NTT DoCoMo FOMA PC設定ソフト] and click [追...
  • Page 349 Example: When using Windows XP Click [次へ]. Click [スタート] → [すべてのプログラム] → [FOMA You can connect with [ユーザー名] and [パスワード] left blank. • When using Windows XP or Windows 2000 Professional, PC設定ソフト]. you can select any user who can perform the operation. Put a checkmark for [最適化を行う] and click [次へ].
  • Page 350 To set [ユーザー名] and [パスワード], enter the various “<” “>” “|” and “””. information supplied by your service provider accurately, in • If [FOMA SO702i] is not set for [モデムの選択], select particular, uppercase and lowercase letters. [FOMA SO702i]. • When using Windows XP or Windows 2000 Professional, you can select any user who can perform the operation.
  • Page 351 Connect the FOMA terminal to a PC before starting this “?” “<” “>” “|” and “””. operation. [モデムの選択]: Example: When using Windows XP Select [FOMA SO702i]. Double-click the connection icon on the [電話番号]: Enter the line phone number of your provider. desktop.
  • Page 352 W-TCP Setting Host (APN) Setting The W-TCP setup software is a “TCP parameter setting” You can set a host (APN) for packet communications. tool for optimizing the transmission capacity of TCP/IP Connect the FOMA terminal to a PC before starting this when you perform packet communications using the operation.

  • Page 353: Setting Communications Without The Foma Pc Setup Software

    Enter a dummy (nonexistent) phone number (such Setting Communications Without as “0”) at [電話番号], select [FOMA SO702i] at [接続 the FOMA PC Setup Software 方法], and click [OK]. The connection window appears. The procedure for setting packet or 64K data communi- cations without using the FOMA PC setup software is given below.
  • Page 354 Select [ダイヤルアップモデムを使用して接続する] Setting ON/OFF for the Notify Caller ID and click [次へ]. The caller ID is important personal information. Carefully Put a checkmark in the checkbox of [モデム- FOMA decide whether you want to notify a recipient of your SO702i] and click [次へ]. caller ID.
  • Page 355 Check each item of the [全般] tab. • When multiple modems are connected to a PC, put a Click [OK]. checkmark only for [モデム - FOMA SO702i] at [接続方法]. The host and TCP/IP protocol are set. • Remove the checkmark from [ダイヤル情報を使う].
  • Page 356 For packet communications • When multiple modems are connected to a PC, put a Enter “＊99＊＊＊<cid>#”. Enter the registration number checkmark only for [モデム - FOMA SO702i] at [接続方法]. of a host for <cid>. • Remove the checkmark from [ダイヤル情報を使う].
  • Page 357 Click [次へ] and go to step 3. Double-click the [新しい接続] icon. Enter a host name (any name) at [接続名] and click [次へ]. • If [モデムの選択] is not set to [FOMA SO702i], select [FOMA SO702i]. When using Windows 98 Click the [サーバーの種類] tab and check each item.

  • Page 358: At Commands

    Performing the Dial-up Connection AT Commands Connect the FOMA terminal to a PC before starting this AT commands are the commands (instructions) for setting operation. and changing the functions of the FOMA terminal on a Example: When using Windows XP Click [スタート] →...

  • Page 359: At Command List

    AT Command List AT commands that can be used for FOMA SO702i are listed below. [&F] : Commands that have their settings initialized by the AT&F command. [&W] : Commands that have their settings saved by the AT&W command. You can use the ATZ command to call back the setting value.
  • Page 360 Command Outline/Parameter Input example AT+CGDCONT=[<cid>[,“PPP”[,“<APN>”]]] Sets a host (APN) during outgoing packet transmission. AT+CGDCONT=2,“PPP”,“abc” AT+CGDCONT= ※1 cid=1-10 Used for managing hosts (APN) saved in the FOMA terminal for AT+CGDCONT=<cid> ※2 packet communications AT+CGDCONT? APN=Arbitrary Host-specific arbitrary character string that indicates a host AT+CGDCONT=? AT+CGEQMIN=[<cid.[,,<n>[,<m>]]] Saves the criteria for permitting or not permitting QoS (Quality of...
  • Page 361 Disconnects packet or 64K data communications. ATI<n> Displays an identification code. ATI0 Displays “NTT DoCoMo” (When the parameter is omitted). Displays the name of the FOMA terminal. Displays the version of the FOMA terminal. Switches from the online command mode to the online data mode during communications.
  • Page 362 Command Outline/Parameter Input example ATS2=<n> Sets an escape character. ATS2=0 ATS2? n=0-126 43: Default, 0: When the parameter is omitted [&F] n=127 Disables the escape operation. ATS3=<n> Sets a carriage return (CR) character that can identify the end of an ATS3=13 AT command character string.
  • Page 363 Numeric value SIM wrong SIM (IC card equivalent Text indication Connection speed indication to UIM) other than a CONNECT 32000 32,000 bps DoCoMo product is in- CONNECT 64000 64,000 bps serted. incorrect password Wrong password CONNECT 384000 384,000 bps unknown Unknown error ●...
  • Page 364 ■ Communications protocol result codes Numeric value Text indication Description indication PPPoverUD 64K data communications connection PACKET Packet communications connection ■ Example of result code indication ● When ATX0 is set When the connection is completed, only “CONNECT” is displayed regardless of the AT¥V command setting (P.20). Text indication example Numeric value indication example ATD＊99＊＊＊3#...

Table of Contents