Page 1
Easy Search/Contents/ Safety Precautions Manual for Before Using the FOMA Terminal Placing/ Receiving Calls ’06.2 Placing/Receiving Videophone Calls PushTalk Phonebook Sound/Display/ Light Settings Security Settings Camera i-mode/ i-motion Mail i-αppli i-Channel Mobile Wallet/ ToruCa Displaying/Editing/ Managing Data Other Useful Functions Network Services Data Communications Entering Text...
Page 2
SSL. In the event that the user shall sustain damage or loss due to the use of SSL, neither DoCoMo nor the certifiers shall be responsible for any such damage or loss.
Information on Using the Manual and How to Look up in the Manual This manual guides you through the operating instructions with step-by-step screen examples for each operating procedure to ensure that you operate the FOMA terminal properly. ■How To Look up in the Manual This manual employs several search methods so that it can provide the most appropriate way to find a page relating to your desired function or service flexibly according to your need or situation.
A function, referred to as “Notify caller ID” here, can be searched in diverse ways as follows. Index (P.356) Search by a function or service name known to you or a function name to be displayed on the FOMA terminal’s display. Service numbers ....
Page 5
■Typical layout of the operating instructions page Showing Your Phone Number on the Recipient’s Phone Section title When placing a call, your phone number can be shown in the display of the recipient’s An outline and objectives Chapter title phone you are calling. •...
Easy Search You can search a function that you want to know or you consider useful to know from a listing sorted by purpose or by a function name. Useful Functions for a Call your phone number Sending or keeping it anonymous ... P.40 (Notify caller ID) Hands-free Talking on the mobile phone ......
Useful Functions for Mail Deco-mail Sending ............P.191 (Compose and send Deco-mail) image Sending an ............P.194 (File attachment) up to five persons at a time Broadcasting mail ( ) ..P.211 (Mail list) Sorting automatically received mail ......P.208 (Sort inbox) signature Adding a to mail messages ......
Page 8
Information on Using the Manual and How to Look up in the Manual ..1 Contents Easy Search ................4 Features of the FOMA SO902i ..........8 Making Full Use of SO902i! ..........10 Safety Precautions (Observe Strictly) ........12 Handling Precautions ............
i-mode/i-motion What is i-mode?, i-mode menu, Display sites, Change i-mode password, Internet connection, Bookmark, Screen Memo, Save image, Download, Phone To/Mail To/Web To/i-αppli To, i-mode setting, Receive a message, Check new messages, MessageR/MessageF, SSL certificate, User certificate, Host selection, What is i-motion?, Download i-motion, and so on... Mail What is i-mode mail?, Mail menu, Compose and send mail, Compose and send Deco-mail, Template, File attachment, Save mail, Auto receive, Receive option, Check new messages, Reply to mail, Forward...
Features of the FOMA SO902i “FOMA” is the name of NTT DoCoMo’s mobile service based on the W-CDMA (Wideband Code Division Multiple Access) system, which has been approved as a global standard of third generation (3G) wireless communications systems (IMT-2000 or International Mobile Telecommunications-2000).
Page 11
Videophone Compact and Stylish Design You can talk face-to-face with a person you are Advanced features of the 902i series as well as a calling. You can switch to the Out-camera so that 3.2M camera are packed into the compact and you can show the scenery around you to the light-weight body.
Making Full Use of SO902i! PushTalk Recipient Recipient You can communicate among several persons Recipient (up to five persons including yourself) with a simple operation of pressing for over a second to invoke the PushTalk phonebook, Caller Recipient selecting recipients, and pressing (P.76).
Page 13
i-Channel You can automatically receive a variety of information on a regular basis. You can also display a list of available channels by pressing . i-Channel provides you with information that is rich and detailed (P.228). Unsubscribed Subscribed → 最高14℃ 10 Connection Mail...
Safety Precautions (Observe Strictly) For safe and proper use of the FOMA terminal, please read the “Safety Precautions” prior to use. Keep the Manual in a safe place for future reference. ALWAYS observe the safety precautions since they intend to prevent personal injury or property damage.
Page 15
Adapter 01 for both domestic and overseas use malfunction. Also, it may cause the ※ Contact our service counter (DoCoMo battery pack to leak, overheat, shop, etc.) for information on other explode, or catch fire.
Page 16
CAUTION Do not place on an unstable or inclined Keep the FOMA terminal, battery platform. pack, adapter, and UIM out of the reach of babies and infants. Doing so may cause the equipment Don’t to fall and cause injury or malfunction. Failure to do so may cause accidental swallowing or injury.
Page 17
WARNING Power OFF the FOMA terminal in a If you hear thunder while using the place where the use is prohibited such FOMA terminal outdoors, power OFF as in airplane or hospital. immediately and take shelter in a safe place. The FOMA ter minal may affect electronic equipment and electronic Failure to do so may cause injury or...
Page 18
CAUTION Do not place a magnetic card, etc. Do not allow a foreign substance such near the FOMA terminal. as water and other liquids, metal parts, or flammables to get in the UIM Don’t Don’t Magnetic data on bankcards, credit insertion slot on the FOMA terminal.
Page 19
The battery pack may become the source of fire or environmental destruction. Take the Don’t used battery pack to our service counter (DoCoMo shop, etc.) after insulating it by affixing an adhesive tape on the terminal of it or follow the instructions of the local authorities in charge of collecting used battery packs.
Page 20
WARNING Use the adapter only on the specified Clean dust from the plug. power supply and voltage. Failure to do so may cause fire. Failure to do so may cause fire or malfunction. Always use the FOMA When you connect the AC adapter to AC Adapter 01 for both domestic and the power outlet, make sure that it overseas use, especially when you...
Page 21
Handling the UIM CAUTION Please be careful when you remove the UIM (IC portion). Failure to do so may damage your hand or fingers. Handling the FOMA Terminal Near Electronic Medical Equipment ■The following instructions observe the guidelines of the Electromagnetic Compatibility Conference, Japan to protect electronic medical equipment from radio waves from mobile phones.
●Note down the information saved in the FOMA terminal in a separate note and keep it safely. • Under no condition will DoCoMo be held liable for any damaged or lost data saved in the FOMA terminal. ●Do not sit down with the FOMA terminal in the hip pocket of your trousers or skirt. Also, do not keep the FOMA terminal in a place where it may be subject to excessive force such as at the bottom of a bag.
Page 23
●Note down the information saved in the UIM in a separate note and keep it safely. • Under no condition will DoCoMo be held liable for any damaged or lost data saved in the UIM. ●Take an expended UIM to our service counter (DoCoMo shop, etc.) for proper disposal in order to protect the environment.
Supplied and Optional Accessories ■Supplied accessories FOMA SO902i Manual for FOMA SO902i (this manual) (w/warranty and rear cover SO01) (w/Quick Manual P.364) FOMA SO902i CD-ROM ■Optional accessories FOMA AC Adapter 01 Desktop Holder SO01 Battery Pack SO01 (w/warranty and user’s manual) (w/user’s manual)
Page 27
Before Using the FOMA Terminal Part Names and Functions ....................26 Using the Display ........................28 Selecting the Menu ....................... 31 Using the UIM ........................33 Attaching and Removing the Battery Pack ................35 Charging the FOMA Terminal ....................36 Checking the Battery Level ................
Part Names and Functions wj wk Connecting the Flat-Plug Switched Earphone Mic (optional) FOMA SO902i Dimensions (mm) : 109 × 46 × 20 (H × W × D) Weight (g) : About 102 (with battery pack attached)
Page 29
1 Infrared Data Port ql Strap Attachment When you perform infrared communications (P.254) or Attach the strap here. use the FOMA terminal as a remote control (P.257), point w; Rear Cover (P.35) this port to the target device. wa FeliCa Mark 2 Earpiece Indication for a built-in IC card.
Four-way Keys and Enter Key Symbols in Operation Description this manual Enter key Set a selected item. Up arrow Move the cursor upward. Press for over a Left Right second to move the cursor continuously. arrow arrow arrow Press in the stand-by display to display the Data box.
Page 31
/ / / Radio wave condition Battery level (P.38) During i-mode (P.155) Current time (24-hour format) During i-mode communications The vibrator is set for incoming calls (P.99) During packet communications (P.293, 300) The vibrator is set for incoming mail (P.99) While sending/receiving packet communication The vibrator is set for incoming calls and mail data (P.293, 300)
Page 32
Notification Display An icon is displayed in the notification display to alert you, for example, when you cannot answer a call. The icon is displayed from the left in the order of the latest event. Move the cursor to the icon to display the text information and select the icon to check the notification information.
Selecting the Menu The FOMA terminal provides various functions. Press (MENU) to display the menu display. You can switch the menu display between [Normal] and [Simple mode] as well as change menu icons to be displayed in the Normal mode (P.109). For the list of menus in the Normal mode, see P.314.
Selecting a Function from the Menu Display A function can be executed easily by going through the menus. Press (MENU). The menu display appears. Press to select a menu and press The function associated to the menu is selected. ● You can execute a function in the menu display by pressing a key on the keypad.
Using the UIM The UIM (FOMA card) records user information such as your phone number. Insert a UIM in a FOMA-compatible terminal to use it. Inserting/Removing the UIM When inserting/removing the UIM (FOMA card), make sure to power OFF the FOMA terminal, remove the battery pack, and perform the operation with the FOMA terminal held with your hand.
About the Function for Restricting UIM Operation The FOMA terminal provides a function for restricting UIM (FOMA card) operation in order to protect your data and files. If you record a videophone message or download files or data from sites or mail while the UIM is inserted in the FOMA terminal, the UIM operation restriction function is automatically set for these data and files.
WORLD WING WORLD WING is the DoCoMo’s FOMA international roaming service that enables you to place or receive a call using the same mobile phone number even when you are overseas, just by replacing the UIM (green) with a card for a WORLD WING service-compatible FOMA terminal or overseas-use mobile phone (W-CDMA or GSM system).
(The average life of a battery pack is about one year. However, depending on the frequency of use, the life may become shorter.) Return all spent battery packs to NTT DoCoMo or a dealer, or a recycling shop to protect the environment.
Page 39
How to Charge the FOMA Terminal Below is the procedure to charge the battery pack using the optional Desktop Holder SO01 with the FOMA AC Adapter 01 connected. Make sure to see the user’s manuals of the Desktop Holder and AC Adapter. The battery pack cannot be charged alone.
Checking the Battery Level The estimated battery level is indicated in the display. • Use this level only as estimated. Display Charge level Sufficiently charged. Slightly low. Very low. It is recommended to charge. (Flashes) The battery level is 0. Charge. ●...
Powering ON/OFF • The screen for confirming whether to execute the SW Update may appear when you power ON the FOMA terminal (P.347). Press for over two seconds. The FOMA terminal is powered ON, the display and the keypad lights are turned on, and the Wake-up image (animation) is displayed.
Setting the Date and Time Set the date and time of the FOMA terminal. From the Menu, select [Settings] → [Management] → [Date/time] and press Date/time Date −−−−/−−/−− −−− Time −−:−− Enter the year, date, and time. Enter the year and date within the range from 2000/01/01 to 2050/12/31. Enter the time in 24-hour format (00:00 to 23:59).
Checking Your Own Phone Number Your phone number can be checked. You can also save your name, mail address, etc. • If the Own number is saved as Secret, the data other than your phone number, mail address, and Additional No. is not displayed.
Page 44
Enter your home postal address at [ Enter an address within 64 full-width or 128 half-width characters. Enter your home phone number at [ Enter a number within 26 digits. Enter your home mail address at [ Enter a mail address within 50 half-width alphanumeric characters. Enter your office name at [ Enter a name within 64 full-width or 128 half-width characters.
Page 45
Placing/Receiving Calls ■Placing Calls Placing a Call ........................44 Switching from Voice Call to Videophone Call ........<Chg. to videophone> Redialing Previously Dialed Numbers ............<Redial record> Changing the Caller ID Setting ON/OFF for an Individual Call ......<186/184> Placing a Call by Specifying a Condition ................49 Setting a Prefix ....................
Placing a Call Check the radio wave condition and enter a phone number. • Do not cover the antenna with your hands for a call in better radio wave condition. Enter a phone number in the stand-by display. • You can enter a phone number of up to 80 digits. •...
Page 47
If you enter “P (pause)” between the phone number and touch-tones when you book a ticket, * play back your home answering machine, or send a message to a DoCoMo pager , the touch-tones are sent by separating the numbers at the pause (P).
Page 48
Switching from Voice Call to Videophone Call A caller can switch to videophone call during a voice call. • This function can be used only between terminals that can switch between voice and videophone calls. A recipient must preset the V.ph switch notice to [Activate] (P.74). Press (Func) during a voice call, select [Chg.
Page 49
Redialing Previously Dialed Numbers Up to 30 previously dialed calls are saved in the Redial record with their dates/times, phone numbers, and names. The redial records can also be listed in the order of phone numbers you most frequently dial (Dial frequency record). Press ) in the stand-by display.
Page 50
Deleting the Redial Record The Redial and Dial frequency records are retained even if the FOMA terminal is powered OFF. If you do not wish others to know the previously dialed records, delete one or all of the redial/dial frequency records. •...
Page 51
Placing a Call by Specifying a Condition When you place a call, you can select a call type and call condition from the Call menu, for example, whether or not to notify a recipient of your phone number. Example: Placing a voice call Enter a phone number in the stand-by display and press (Call).
Page 52
• If you have an overseas specific 3G mobile phone, you can connect to an international videophone by selecting videophone after the above dialing method. ※ See the NTT DoCoMo website for information about countries to which a videophone call can be connected and telecommunication companies.
Page 53
You can also automatically add the number by entering “+” when you place a call. • At the time of purchase, DoCoMo’s “WORLD CALL 009130010” and “Japan +81” are preset as the IDD prefix and Country code, respectively.
Page 54
Select an input field and press Country code1 Country Name 日本 Country code +81 Enter a country name in the country name field and a country code in the country code field. Enter a country name within eight full-width characters or 17 half-width characters and a country code within 26 digits.
Page 55
Setting the Alarm When Reconnecting a Dropped Call This function automatically reconnects the call interrupted during a voice, videophone, or PushTalk call due to the radio wave condition, such as in a tunnel or between buildings, right after the radio wave condition is recovered. You can set an alarm tone when a call is reconnected.
Receiving a Call When you receive a call, you are notified by flashing indicator, ring tone, vibrator, etc. The operation for an incoming call varies depending on the settings of the Incoming set, Manner mode, etc. When receiving a call, press A phone number appears in the display when a caller sends it.
Page 57
Receiving a Call by Switching from Voice Call to Videophone When a caller switches from a voice call to a videophone call, a recipient can select the image to be sent. • This function can be used only between terminals that can switch between voice and videophone calls. Preset the V.ph switch notice to [Activate] (P.74).
Page 58
Using the Received Record Up to 30 previously received calls are saved in the Received record with their dates/times, phone numbers, and names. A ring time for a missed call can be checked. Press ) in the stand-by display. The phone numbers or names appear in descending order from the most Received Fre...
Page 59
● When a caller uses a “Dial-in” phone number, the phone number displayed may be different from the caller’s dial-in number. ● If the caller switches the call between voice and videophone during a call, the call you received first is saved in the Received record.
Putting a Call on Hold If you cannot answer a voice or videophone call immediately, you can put the call on hold. • Even if the answer is put on hold, the caller is charged for the calling charge. Example: Putting a voice call on hold When receiving a call, press The beeps sound and the answer is put on hold.
Page 61
■When the Public mode (Driving mode) is set • Even if there is an incoming call, the ring tone does not sound and you cannot answer it. The notification icon of missed call appears and the call is saved in the Received record. The guidance for the Public mode is played back to inform the caller that you are unable to answer the call because you are driving or in a place where talking on a mobile phone should be avoided (trains, buses, or movie theaters), and then the call is disconnected.
Page 62
Using the Public Mode (Power off) The Public mode (Power off) is an automated answering service which takes into account the manners in highly public places. When the Public mode (Power off) is set, the guidance is played back to inform the caller that you are unable to answer the call because you are in a place where it is required to power OFF a mobile phone (such as in hospitals, airplanes, and near priority seats in trains), provided that there is an incoming call when the FOMA terminal is powered OFF, and then the call is disconnected.
Page 63
It is recommended that you make a separate note of the recorded voice message. The data may be lost as a result of malfunction, repair, change, or other handling of the FOMA terminal. Under no condition will DoCoMo be held liable for any damaged or lost data saved in the FOMA terminal. ●...
Page 64
When Receiving a Call The answering message is played back to the caller after the ring tone Play answer message ドコモ一郎 sounds for the set duration. To talk to the caller Press When you receive a videophone call The answering message is played back and the answering image is displayed to the caller.
Page 65
Setting the Operation of the Record Message Press in the stand-by display, select [Set rec msg], and press Set record message Set OFF To answer 008sec (000−120) Answer img(V.phone) テレヒ゛電話動作中 Record img(V.phone) テレヒ゛電話動作中 Enter the time before starting the answering message at [To answer]. Enter from 000 to 120 seconds. Select an image to be sent when answering a call from My picture of the Data box at [Answer img(V.phone)].
Page 66
Playing Back/Deleting a Record Message/Voice Memo You can play back or delete a recorded record message/videophone message and voice memo (P.266). Playing Back a Record Message/Voice Memo Example: Playing back a record message Press in the stand-by display, select [Play rec msg], and press To play back a videophone message Play record message...
Page 67
Placing/Receiving Videophone Calls What is Videophone? ......................66 Placing a Videophone Call ....................67 Receiving a Videophone Call ....................70 Using Chara-den ........................71 Setting the Videophone Operation ............<Videophone setting> Setting Notice for Switching between Voice and Videophone Calls .. <Videophone switch notice>...
What is Videophone? You can use the videophone function between DoCoMo videophone compatible terminals. You can use videophone to talk to the recipient/caller while looking at each other’s image. You can send a still image, substitute image, or Chara-den character instead of your own.
Operations During a Videophone Call Operation Key operation Switch between camera image/substitute Press (MySide/Sub). Every time you press the key, the display is image switched between camera image/substitute image. Switch cameras Press (In/Out). Every time you press the key, the camera is switched between the In-/Out-camera.
Page 70
● If you enter a phone number, press (Call), and select [Videophone] from the Call menu, you can place a videophone call by specifying an image to be sent and communication speed. ● You may not be able to place a videophone call while another function is being executed. ●...
Page 71
Switching from Videophone Call to Voice Call A videophone caller can switch to voice call during a videophone call. • This function can be used only between terminals that can switch between voice and videophone calls. A recipient must preset the V.ph switch notice to [Activate] (P.74). Press (Func) during a videophone call, select [Chg.
Receiving a Videophone Call When you receive a videophone call, you are notified by flashing indicator, ring tone, vibrator, etc. The operation for an incoming call varies depending on the settings of the Incoming set, Manner mode, etc. When you receive a videophone call, press (V.phone).
Receiving a Call after Switching from Videophone Call to Voice Call When a videophone caller switches from a videophone call to voice call, the recipient’s phone automatically switches to a voice call. • This function can be used only between terminals that can switch between voice and videophone calls. Preset the V.ph switch notice to [Activate] (P.74).
Setting the Videophone Operation Setting the Display to Be Used in a Videophone Call You can set the image to be displayed on the videophone images (Large) and (Small) during a videophone call. From the Menu, select [Settings] → [Call] → [Videophone] → [Display setting] and press [Main-Other side] : Display the recipient’s/caller’s image on the videophone image (Large) and your image on the videophone image (Small).
Page 75
Setting the Videophone Image Quality You can set the quality of an image to be sent to the recipient. From the Menu, select [Settings] → [Call] → [Videophone] → [Visual preference] and press [Prefer img qual] : Send an image with priority on image quality. : Send an image by keeping a balance between image quality and movement.
Setting Notice for Switching between Voice and Videophone Calls You can set whether or not to notify the recipient/caller that the FOMA terminal is capable of switching between voice and videophone calls. • You cannot perform this setting when you are outside of the service area or in a place where radio waves do not reach, or during a voice or videophone call.
Page 77
PushTalk What is PushTalk? ........................ 76 Originating a PushTalk Call ....................78 Receiving a PushTalk Call ....................79 Saving Data in the PushTalk Phonebook ................79 Originating a PushTalk Call Using the PushTalk Phonebook ..........81 Deleting a PushTalk Phonebook Entry ................. 82 Using the PushTalk Phonebook ..............
What is PushTalk? You can communicate among several persons (up to five persons including yourself) with a simple operation of pressing for over a second to display the PushTalk phonebook, selecting recipients, and pressing . Every time you press and speak, you are charged for PushTalk communications.
Page 79
Using the Display During PushTalk Communications : During PushTalk communications : Hands-free ON 3 Active speaker On PushTalk The phone number (or the member name when the speaker is saved in the Phonebook) appears ドコモ一郎 [Myself] : You are currently the active speaker (you ○○○同好会...
Originating a PushTalk Call • You cannot originate a PushTalk call during a voice call, a videophone call, or data communications. • If you originate a PushTalk call during i-mode communications, the i-mode communications is terminated. Originating a PushTalk call while running i-αppli also stops the i-αppli. Enter a phone number in the stand-by display.
Receiving a PushTalk Call When you receive a PushTalk call, you are notified by flashing indicator, ring tone, vibrator, etc. The operation for an incoming PushTalk call varies depending on the settings of the Incoming set, Manner mode, etc. • If you receive a PushTalk call during a voice call, the PushTalk call is not connected. The notification icon of missed call appears and the call is saved in the Received record.
Page 82
Select [View phonebook] and press The FOMA terminal phonebook appears. Select an entry → a phone number and press The phone number is saved in the PushTalk phonebook and “ ” appears Select PushTalk No. 090XXXXXXXX in the entry in the FOMA terminal phonebook. 03XXXXXXXX...
Select [Member list] and press Select member 4/19 To cancel all selections 携帯あき子 Press (Rel all). 携帯なつ子 携帯はる子 ドコモ一郎 ドコモ二郎 Select a member, press , and then press (Complete). “ ” appears for the selected member. Press (Complete). The group is saved in the PushTalk phonebook. Originating a PushTalk Call Using the PushTalk Phonebook If you save persons as members in the PushTalk phonebook, you can originate a PushTalk call to several persons.
Originating a PushTalk Call from the Group Press for over a second in the stand-by display and press To display group numbers Member Group ○○○同好会 When saved, group icons are displayed instead of group numbers. Press △△△クラブ to switch the display temporarily between group icons and group ○△○愛好会...
Select a member and press (Func). The Function menu appears. Select [Delete] → [Delete one] → [Yes] and press The screen for confirming whether to delete the corresponding entry from the FOMA terminal phonebook appears. Select [Yes]/[No] and press The selected member is deleted. Using the PushTalk Phonebook You can connect to the network and use the PushTalkPlus service (P.76).
Page 86
Setting the Ring Time If you select [OFF] for the Auto answer setting, set the ring time of the PushTalk call. From the Menu, select [Settings] → [Application] → [PushTalk] → [Set ring time] and press Enter the ring time within 01 to 60 seconds. Enter the PushTalk ring time.
Page 87
Phonebook Phonebooks the FOMA Terminal Can Use ................86 Saving an Entry in the FOMA Terminal Phonebook ..<Add to FOMA terminal phonebook> Saving an Entry in the UIM Phonebook ........... <Add to UIM phonebook> Saving the Redial/Received Record in the Phonebook ............91 Saving a Group ....................
Phonebooks the FOMA Terminal Can Use The FOMA terminal can use the FOMA terminal phonebook, UIM (FOMA card) phonebook, and PushTalk phonebook. The tables below indicate the data you can save in each Phonebook. ■Saved data in the FOMA terminal and UIM phonebooks ○: Can be saved ×: Cannot be saved FOMA terminal phonebook UIM phonebook...
The saved data may be lost as a result of malfunction, repair, change, or other handling of the FOMA terminal. Under no condition will DoCoMo be held liable for any damaged or lost data saved in the Phonebook, etc. ●...
Page 90
• When you save a mail address as “phone number + Secret code@docomo.ne.jp” in the Phonebook, if you save a Secret code, you cannot send mail or reply mail to this address. To avoid this problem, change the mail address to “phone number@docomo.ne.jp”...
Select a Chara-den file from Chara-den of the Data box at [ Select a Chara-den character to be sent when placing a videophone call. To specify no Chara-den character Select [None]. A substitute image or your own image set in the Set outgoing image (P.72) is sent.
Saving an Entry in the UIM Phonebook Up to 50 entries can be saved in the UIM (FOMA card) phonebook. Press ) in the stand-by display and press (Create). Select [UIM] and press To save an entry in the FOMA terminal phonebook Edit phonebook...
Saving the Redial/Received Record in the Phonebook A phone number saved in the record can be directly added to the Phonebook. Example: Saving a received record in the FOMA terminal phonebook as a new entry Press ) in the stand-by display. To save a number from the redial record Press ) in the stand-by display.
Saving a Group Up to 20 groups can be saved in the FOMA terminal phonebook, and up to 10 groups can be saved in the UIM (FOMA card) phonebook. • You cannot change [ No Group] in the UIM phonebook. Example: Saving a group in the FOMA terminal phonebook Press (Func) in the Phonebook.
Displaying the Phonebook You can use the Phonebook to perform various operations. Press ) in the stand-by display. あ か さ た な は ま や To display the UIM phonebook ドコモ一郎 Press (UIM). Every time you press the key, the display switches ドコモ三郎 between the FOMA terminal and UIM phonebooks. “ ”...
Searching the Phonebook The Phonebook can be searched to display up to 100 entries temporarily. Press (Func) in the Phonebook. The Function menu appears. Select [Search] and press [Name] : Enter the first part of a reading within 32 half-width characters. Search phonebook...
Editing a Phonebook Entry From the Phonebook, select an entry and press Press (Edit). The Edit phonebook display appears. Edit each item. • Follow the same steps as in the Add to FOMA terminal phonebook (P.87, step 3 to 19) or in the Add to UIM phonebook (P.90, step 3 to 7).
Checking the Number of Entries Saved You can check the number of entries saved in the FOMA terminal phonebook and UIM (FOMA card) phonebook and the number of locations still available or entries saved as Secret. Press (Func) in the Phonebook. The Function menu appears.
Page 99
Sound/Display/ Light Settings Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail ..<Incoming set> ■Setting the Ringer Setting the Sounds of the FOMA Terminal ..........<Set basic tone> Adjusting the Volume of Caller’s Voice ..............<Volume> Adjusting the Volume While Playing Flash Movie ......... <Sound effect>...
Setting the Ring Tone/Image/Indicator Color for Incoming Call and Mail You can set a ring tone, ring volume, incoming image, vibration pattern, and incoming indicator color for each type of incoming transmission (voice, videophone, or PushTalk call, or mail, etc.). Example: Performing incoming mail settings From the Menu, select [Settings] →...
Page 101
Select an image from the Data box at [Incoming image]. • For Call and Videophone, you can set a GIF/JPEG image or Flash movie not exceeding 500K or 100K bytes in file size respectively and [VGA(640×480)] in image size from My picture, and an i-motion with video and sound tracks or with video track only of an image size of [sQCIF(128×96)] or [QCIF(176×144)] from i-motion.
● If several ring tones, call images, and incoming indicator colors are set for voice/videophone call/mail, the following priority is applied. 1. Ring tone of Number Setting (When you receive a call to an Additional No. for the Multi Number) 2.
● The sound effect set for the Keyguard rel and Charge sound may not be heard under some conditions, such as when another sound is active. ● The 3D sound function reproduces a 3-dimensional stereophonic sound or space-wise moving sound, over a Flat-Plug Stereo Earphone Set.
Setting the Poor Signal Quality Alert You can set to inform you with alarm of the possibility of the call being disconnected during a voice call due to the radio wave condition. From the Menu, select [Settings] → [Call] → [Call quality] → [Quality alarm] and press [High] : Sound a high alarm tone.
Muting the Ring Tone All sounds from the FOMA terminal can be disabled to avoid disturbing others by using the Manner mode. There are three types of the Manner mode. Set the mode by using the Manner mode setting (P.104). •...
Changing the Manner Mode Settings The Manner mode can be selected from three types: “Manner”, “Silent”, and “Original manner”. Press in the stand-by display. Manner mode Set OFF Mode Manner Original manner Select the type of the Manner mode at [Mode]. Press (Complete). The type of the Manner mode is changed.
Setting the Stand-by Display You can set the image for the stand-by display, the Telop display for i-Channel, Calendar/ Clock display, and whether to show or hide the guide display. From the Menu, select [Settings] → [Display] → [Stand-by] and press [Stand-by display] : Set an image or i-αppli software to be displayed in the stand- Stand−by display...
Select the font color of the calendar and clock at [Font color]. • You cannot change the font color of Saturdays and holidays in the calendar. Select the display format of the clock at [Clock style]. [12h] : Display in 12-hour format. [24h] : Display in 24-hour format.
Setting the Display for Incoming and Outgoing Calls You can use this function to set whether an image or the name of a caller/recipient specified in the Phonebook is displayed when you place/receive a voice/videophone call or right after receiving mail. From the Menu, select [Settings] →...
Select [Display light] and press [Charging] : Set whether to keep the display light ON during charging. Display light Charging OFF [Videophone] : Set whether to keep the display light ON during a videophone call. Videophone ON [Internet] : Set whether to keep the display light ON while displaying sites or Internet OFF...
Changing the Appearance of the Menu You can switch the menu display modes, and also set images to customize nine icons displayed in the Normal mode menu. Example: Setting an image as the icon for i-mode From the Menu, select [Settings] → [Display] → [Menu setting] and press [Menu mode] : Switch the menu display mode (P.31).
● The indicator color for a missed call follows that set in the Incoming set. ● The indicator flashes in the following order of priority when there are mix of missed calls and unread mail/ messages. 1. Voice call indicator color 2.
Page 113
Security Settings ■About Security Codes Security Codes Used on the FOMA Terminal ..............112 Changing the Security Code ................ <Change code> Setting the PIN Code ..................<UIM setting> Canceling the PIN Lock ....................... 115 ■Restricting Operations and Functions Available on the Mobile Phone Various Locking Functions ....................
● Be very careful not to let others know your security code. If your security code is known by anyone else, DoCoMo shall have no liability for any loss due to any unauthorized use of it. ● DoCoMo by no means inquires your security code.
Enter a new FOMA terminal PIN1 code PIN1/PIN2 code Enter the PUK code Consecutive Enter the Contact the nearest User certificate operation three times PIN2 code DoCoMo shop Connection to a Consecutive incorrect FirstPass-compatible site 10 times input incorrect input...
Changing the Security Code From the Menu, select [Settings] → [Management] → [Change code] and press Input security code Enter the current Security code and press (OK). The entered Security code is displayed as asterisks ( ). • The Security code is set to “0000” at the time of purchase. Enter the new Security code and press (OK).
Changing the PIN1 Code/PIN2 Code • To change the PIN1 code, set the PIN1 code setting to [ON]. Example: Changing the PIN1 code From the Menu, select [Settings] → [Management] → [UIM setting] and press The Security code screen appears. Enter the Security code and press (OK).
Various Locking Functions The FOMA terminal offers many lock functions to assure safety operation, such as preventing unauthorized use of the FOMA terminal, protecting the Phonebook from being seen by others. You can use any mix of these functions depending on the purpose. Functions Description Lock all...
Locking the Keypad to Prevent Unauthorized Use You can set the Lock all to prevent others from using the FOMA terminal. When the Lock all is set, you cannot perform any operation other than powering ON/OFF the FOMA terminal. From the Menu, select [Settings] → [Lock/Security] → [Lock all] and press The Security code screen appears.
Page 120
Select [ON]/[OFF] of the Remote lock at [Set]. Enter the duration for counting the number of incoming calls at [Monitoring]. Enter from 01 to 10 minutes. Enter the number of calls to be received within the specified duration at [Times]. Enter from 03 to 10 times.
If there is an incoming call when the Self mode is set, the caller hears a guidance informing that the FOMA terminal is outside of the service area or the FOMA terminal is powered OFF. When using the DoCoMo Voice Mail Service or Call Forwarding Service, these services can be used in the same manner as when the FOMA terminal is powered OFF.
● When the PIM lock and Key dial lock are set simultaneously, “ ” is displayed instead of “ ”. ● If you set the PIM lock when data other than that preinstalled in the [Preinstall] folder of the Data box is set for the image, substitute image, or ring tone in the stand-by or other display, the default setting at the time of purchase is used.
Locking the Keypad to Prevent an Accidental Use While carrying around the FOMA terminal that is powered ON, the keypad can be locked to prevent from pressing the keypad accidentally. • The following operations are available while the Lock key is set. Voice call While placing a call Stop (...
Setting the Display of the Redial/Received Record The Redial, Dial frequency, and Received record can be set not to be displayed. Playback of the Record message is also disabled. To cancel the Record display temporarily, enter the Security code. Press ) in the stand-by display and press (Func).
Specifying Phone Numbers to Accept/Reject Calls You can set to accept/reject voice, videophone, or PushTalk calls only from specific phone numbers. For the Accept/Reject calls, up to 20 phone numbers can be saved (List). You can also set to accept/reject calls only from specific groups in the FOMA terminal phonebook.
Rejecting Calls with No Caller ID When receiving a voice, videophone, or PushTalk call without the caller’s phone number displayed, the reason for not displaying it is shown. You can decide whether to accept a call based on the reason. •...
Select [ON]/[OFF] at [Missed call display]. [ON] : Display all calls in the Received record. [OFF] : For a call the ring time of which is shorter than the set time, neither the missed call notification icon nor the received record is displayed. The call is saved in the Received record. If a record message or videophone message is recorded, the received record is displayed.
Other Measures “For Safety Operation” The following items are available for safety use of the FOMA terminal. Purpose Function/Service name Page Do not receive mail from unknown senders. Change Mail Address, Register a See the “i-mode Secret Code User’s Manual”. Receive mail only from the specific domains.
Page 129
Camera Before Using the Camera ....................128 Recording Still Images ................. <Record still images> Recording Movies ..................<Record movies> Displaying Saved Images ....................136 Changing the Camera Settings ..................136 Adjusting the Camera during Recording ................139 Setting the Camera Operation .................... 142 Using the Bar Code Reader ..............
Before Using the Camera You can record images by the FOMA terminal’s built-in camera, which you can send by attaching to i-mode mail and set for the stand-by display, etc. To use the “Memory Stick Duo”, you need to obtain it separately. If you do not have a “Memory Stick Duo”, you can purchase it at a home electric appliance store or other similar store (P.245).
Page 131
About Still Image/Movie Item Still image Movie File format JPEG (Exif format) MP4 (MobileMP4) File name When saved to [Data box] When saved to [Data box] YYYYMMDDhhmmss YYYYMMDDhhmmss • The recorded year, month, date, hour, minute, • The recorded year, month, date, hour, minute, second is displayed.
Page 132
About Recording Time of Movie The recording time of movie that can be saved in the FOMA terminal or the “Memory Stick Duo” varies depending on the recorded image quality, Shoot mode, image size, file size restriction settings as well as the recording conditions and object of shooting. ■Estimated recording time of movie you can record and save in the FOMA terminal Recording time available for each movie Total recording time available...
Page 133
Icons in the Camera Mode In the Camera mode display, the following icons appear depending on the settings and functions selected. • You can use (Disp) to switch the display of the icons and guide display (Standard, Simple, or Display off). Even if you select “Display off”, related icons are displayed when you perform any operations.
Guide Display In the Camera mode, use the Four-way keys (Up/Down/Left/Right arrow keys), the Enter key, the Mail key, the i-mode key, and the i-Channel/My Selection key according to the instructions shown in the guide display. Display Operations Display Operations Press Press Func Play Disp Scene...
Page 135
Recording Images Using Auto Focus To take sharper still images by the Out-camera, press the shutter halfway to adjust focus, and then press the shutter all the way down to take the picture. • You can focus on the object about more than 10 cm away. •...
Page 136
(Func) in the Camera mode display, select [Shoot] → [Shoot mode] → Press [Continuous mode], and press The Shoot mode is set to [Continuous mode] and “ ” appears. Func Play Disp Scene Press (Close). Point the camera at the object and press Images are recorded continuously with the shutter sound, and the screen for confirming whether to save the images appears.
Recording Movies You can make movie recordings with the built-in camera. • The movie recording time varies depending on where to save a movie (P.130). When you save it to the “Memory Stick Duo”, you can record up to 60 minutes per movie. •...
Displaying Saved Images You can check the saved image. • For details about the operation, see My picture (P.238) and i-motion (P.241). Example: Playing back a recorded still image Press (Play) in the Camera mode display. The recorded image appears. To display an image in enlarged or original size Press ).
Page 139
Select a scene and press The scene is set and the icon for the current scene type appears. • No icon appears for [AUTO]. Beach/snow People Party Night scene Landscape Sports Low Light Switching the Camera Used for Recording You can switch between the Out- and In-cameras for recording. (Func) in the Camera mode display, select [Shoot] →...
Page 140
Using the Auto Timer The Auto timer allows you to record yourself or others without holding the FOMA terminal. You can also set the interval until recording is started after you press the shutter. (Func) in the Camera mode display, select [Shoot] → [Auto timer], and Press press Shoot...
Adjusting the Camera during Recording Adjusting Brightness The image brightness (exposure) can be adjusted in seven levels from –1.0EV to +1.0EV according to the ambient condition (EV: Exposure Value). Press (Func) in the Camera mode display, select [Adjust] → [EV], and press •...
Setting Spot Photometry When recording an object against light or an object with the strong contrast to the background, the exposure can be adjusted automatically with reference to the center of the display. Press (Func) in the Camera mode display, select [Adjust] → [Photometry], and press •...
Adjusting White Balance The color balance of the image can be adjusted depending on the lighting condition. If a recording image appears in unnatural colors, set the white balance in accordance with the recording environment. Press (Func) in the Camera mode display, select [Adjust] → [White balance], and press •...
Setting the Camera Operation Selecting the Image Quality You can select the image quality for recording images. Press (Func) in the Camera mode display, select [Set] → [Image quality], and press Still image Shoot Adjust Set [Fine] : The highest image quality with larger file size. Select save to Data box...
Page 145
Restricting the Size of a File Used for Movie Recording You can restrict the size of a movie file to a file size that can be attached to i-mode mail. Press ) in the Camera mode display. The display switches to the Movie shoot display. (Func), select [Set] →...
Page 146
Selecting Where to Save Images You can set the place to save recorded images. Example: Selecting the “Memory Stick Duo” to save the recorded still images (Func) in the Camera mode display, select [Set] → [Select save to], and Press press [Memory Stick] : Save images in the “Memory Stick Duo”.
• Up to 16 QR codes can be scanned serially so that they connect to each other and saved as a single data set. When scanning multiple “Example: FOMA SO902i” segmented QR codes, the message prompting you to scan the next QR code appears after you scan the first one.
Page 148
Locate the JAN/QR code at the center of the display and press (Scan). The scanning of the JAN/QR code starts. Scanning Scanning Scanning When the scanning is completed, the end sound is heard and the data that has been scanned is displayed in the normal display. To save scanned data such as a phone number Move the cursor to data such as a phone number and from the Function menu, select [Add to phonebook] →...
Page 149
i-mode/i-motion ※i-mode is a paid service that requires a subscription. What is i-mode? ........................148 Displaying the i-mode Menu ................ <i-mode menu> ■Displaying a Site Displaying Sites ........................155 Using Sites ......................... 156 Saving a Site in My Menu .................. <My Menu>...
Page 150
What is i-mode? i-mode allows you to use the i-mode compatible FOMA terminal (hereinafter referred to as i-mode terminal) to access various online services such as site (program) connection, Internet connection, and i-mode mail. ●Site (Program) Connection Various online services offered by IP (information service providers), such as weather information and news, are available by selecting Menu List accessible from the i-mode menu.
Page 151
オプション設定 Perform i-mode mail settings and change the i-mode password. (Options) お知らせ&ヘルプ Present notices from DoCoMo and describe the help on i-mode (Information & Help) usage and rules. 料金&お申込 Check charges and pay for it, make changes in subscription, (Charge &...
Page 152
Subscribers to i-Channel automatically receive graphics-based information such as the news and weather distributed to an i-mode terminal by DoCoMo or IP (information service providers). You can run the latest information updates on the stand-by display as Telop text by automatically getting this information on a regular basis.
Page 153
●i-αppli DX i-αppli DX enables you to enjoy i-αppli more conveniently by working in conjunction with the i-mode terminal information (mail, Redial/Received record, Phonebook, etc.). For example, you can compose mail with your favorite character in the display, or set a character to notify you of the caller when receiving a call.
Page 154
●SSL Communications SSL is a data communication system that secures user privacy by means of authentication/encryption technology. The SSL page encrypts data to prevent eavesdropping, tampering, impersonation, and forgery, assuring secure transmission of user’s private information, such as a credit card number and postal address.
• The messages held at the i-mode center can be received by the Check new messages (P.174). ●News Delivery Service (Tokudane News Bin) This is a news delivery service from DoCoMo, which delivers information, such as news and weather forecasts, to an i-mode terminal using the Message R.
Page 156
Under no condition will DoCoMo be held liable for any damaged or lost data saved in the i-mode terminal. ● When an i-mode terminal is repaired, the information downloaded using i-mode, i-αppli, and i-motion are not transferred to the new mobile phone because of copyright laws, excluding some cases.
Displaying Sites Various sites offered by IP (information service providers) can be displayed (the subscription is necessary for some sites). From the i-mode menu, select [i Menu] → [メニューリスト] (Menu List) and press モーション/Vライブ 天気/ニュース/情報 モバイルバンキング 証券/カード/保険 交通/地図/旅行 ショッピング/チケット ファッション/コスメ グルメ情報...
Using Sites Selecting Links/Textbox/Check Box, etc. When using a site, you may display a linked site, enter texts (textbox) or select an item from multiple options (radio button and check box). ■Link Select a link to display the page. Weather Weathernews...
Page 159
Displaying the Previous/Next Page The FOMA terminal stores up to 20 most recently displayed site pages in its cache. Site pages stored in the cache are cleared when you terminate i-mode. When the left or right arrow is displayed in the guide display, the pages stored in the cache can be used for display using without accessing the site.
Page 160
Displaying a Site Correctly If the display of the text is incorrect on a site, you can reload the page after changing the character code. While displaying a site, press (Func). The Function menu appears. Select [Word translate] → [Convert]/[Auto select] and press [Convert] : Sequentially convert the character codes and display the page again.
Page 161
• If you forget the i-mode password, you must bring your official identification (such as driver’s license), the FOMA terminal, and UIM with you to the nearest DoCoMo shop. From the i-mode menu, select [i Menu] → [オプション設定] (Options) → [iモードパ...
Page 162
Displaying Internet Sites i-mode compatible Internet site can be displayed from the i-mode terminal. • Sites that are not compatible with i-mode may not be displayed correctly. From the i-mode menu, select [Go to location] → [URL address] and press The URL address display appears.
Page 163
Saving a Site to Display It Quickly Up to 200 URLs of the sites you display frequently can be saved in the Bookmark. The sites can be directly accessed from the Bookmark. • Both i-mode and Internet sites can be saved as bookmarks, but with some exceptions. •...
Page 164
Adding/Deleting Folders Folders in which bookmarks are saved can be added or deleted. Up to 10 folders can be used to manage bookmarks and folder names can also be changed. • You cannot delete the top folder in the list (default: [ブックマーク] (Bookmark)). Example: Adding a folder From the i-mode menu, select [Bookmark] and press , then press...
Deleting a Bookmark You can delete bookmarks using four methods. Example: Deleting a bookmark From the i-mode menu, select [Bookmark] and press To delete all bookmarks From the Function menu, select [Delete all], enter the Security code, and select [Yes]. Select a folder and press To delete all bookmarks in the folder From the Function menu, select [Delete] →...
Page 166
Saving a Site in the Screen Memo You can save 10 to 100 sites with up to 100K bytes per site as your favorite sites in the Screen Memo. You can also instantaneously call up a saved screen memo. • The number of screen memos that can be saved varies depending on the size of saved screen memos. •...
Page 167
Protecting a Screen Memo You can protect screen memos from being overwritten. You can protect up to 50 screen memos (up to 500K bytes). Select a screen memo from the screen memo list and press (Func). The Function menu appears. To cancel the protection Move the cursor to the protected screen memo and press (Func).
Page 168
Obtaining Graphics from a Site/Message You can load and save your preferred graphic from images and background images displayed on sites, screen memos, messages, mail, and ToruCa(detail) cards (i-anime compatible). You can set the obtained GIF and JPEG images for the stand-by display, as a call image, menu icon, etc., and the Flash movie for the stand-by display, as a call image, etc.
Page 169
Downloading Data from Related Sites You can download i-melody, PDF data, Chara-den, ToruCa cards, Deco-mail templates, and dictionaries from related sites. ■Files that can be downloaded Maximum size Maximum number Type Format Restrictions to be saved to be saved Melody SMF, MFi 100K bytes 10 to 200 files...
Page 170
Using the Phone To/Mail To/Web To/i-αppli To You can use highlighted information in a site, message, mail main body, i-motion Telop text, i-αppli, ToruCa card, PDF data, and i-Channel channel list to place a call, compose mail, display an Internet website, start i-αppli, or perform infrared communications. •...
Page 171
Accessing a Site from the Current Display If the current display contains any URL, the site can be accessed directly from the display (Web To). Select a link (URL) in the display and press The FOMA terminal is connected to the linked site. Running i-αppli from the Current Display If the current display contains any i-αppli link, the software can be started to run directly from the display.
Page 172
Setting i-mode Setting Whether to Receive a PushTalk Call during i-mode You can set whether or not to receive a PushTalk call by disconnecting i-mode if there is any incoming PushTalk call during i-mode or i-mode communications. From the i-mode menu, select [i-mode setting] → [i-mode Arrival Act] and press [Prefer PushTalk] : Receive the PushTalk call and disconnect i-mode.
Page 173
Changing the i-mode Host (ISP Connection Communication) ※ You do not need to change the Host setting when using the i-mode service of DoCoMo. You can set up to 10 hosts for receiving services other than the services provided by i-mode (DoCoMo).
Page 174
Setting Whether to Use Saved Data for Flash Movies You can set whether or not to use the saved data (P.158) when you play back a Flash movie displayed on a site or saved in the Screen Memo. From the i-mode menu, select [i-mode setting] → [Use phone info] and press Select [Yes]/[No] and press The Use phone info is set.
Receiving a Message When a message is received while in the stand-by display, the contents of the message are automatically displayed. Up to 20 Message R and Message F each can be saved in the FOMA terminal. When receiving a message, “ ” or “ ” flashes. Receiving...
Checking a New Message New messages held at the i-mode center while the FOMA terminal is powered OFF or outside of the i-mode service area can be checked. • Depending on the radio wave condition, you may not be able to check new messages. Press (Mail) for over a second in the stand-by display.
Protecting a Message Message R or Message F can be protected from being overwritten. • An unread message cannot be protected. Example: Protecting Message R From the i-mode menu, select [Message] → [MessageR] and press To protect Message F From the i-mode menu, select [Message] → [MessageF]. Select a message and press (Func).
Page 178
: An authentication company issues these certificates. They are SSL list 20 saved in the FOMA terminal at the time of purchase. CA certify 1 CA certify 2 [DoCoMo cert.] : This certificate is required for connecting to the FirstPass Center CA certify 3 and FirstPass-compatible sites and is saved on the UIM (green). CA certify 4 CA certify 5...
Page 179
● DoCoMo shall have no liability for any content and information provided by FirstPass-compatible sites. Any problem must be resolved between you and the FirstPass-compatible site. ● DoCoMo and the authentication company do not guarantee the security for using FirstPass and SSL. Therefore, you must use them at your own discretion and responsibility.
Page 180
Changing the Host for Certificate Issue ※Normally, you do not need to change the setting. When you want a service other than FirstPass services, you can set one host. Note that if you change the setting, you cannot connect to the FirstPass Center. •...
Page 181
What is i-motion? i-motion is movie data that contains both video and sound tracks. You can play back an i-motion on the FOMA terminal and set a saved i-motion for the stand-by display. The i-motion can be of the following types. The type of i-motion varies depending on a site and cannot be selected.
Page 182
● Some i-motion may not be played back/saved properly even if its data is downloaded successfully. ● The playback may be paused or the image may be distorted when you play back i-motion while downloading data depending on the radio wave condition, communication line conditions, or the communication speed. A standard type i-motion allows you to play back as many times as you want after downloading (using the saved data).
Page 183
Mail Mail Function of the FOMA Terminal ................... 182 What is i-mode Mail? ......................183 Displaying the Mail Menu ................<Mail menu> ■Composing i-mode Mail/Deco-mail Composing and Sending i-mode Mail ........... <Compose and send mail> Composing and Sending Deco-mail ........<Compose and send Deco-mail>...
Short Mail Dial special number “1655” Maximum 50 characters i-mode mail i-mode mail Maximum 250 full-width characters FOMA terminal i-mode terminal for Mova service ※ Short Mail is a service that allows text messages to be exchanged between DoCoMo’s mobile phones.
• Users of i-mode terminals (including Mova) need to enter only the mail address portion before the @ mark to exchange mail. • PC users need to enter the full mail address (i.e. including “@docomo.ne.jp”) to send e-mail to i-mode terminals (including Mova).
Page 186
• You can receive mail from the specified companies selectable from au, Vodafone, TU-KA, and WILLCOM. • You can also receive mail from other companies by specifying the domains. ※ All mail from NTT DoCoMo i-mode, i-shot, Charge Notice Service, e-billing, and Visual Net is received regardless of the setting.
Page 187
Number of Characters You Can Send/Receive The number of characters sent or received in i-mode mail is as follows. Full-width characters Half-width characters Item (kanji, hiragana, pictographs, etc.) (alphanumeric characters, katakana, etc.) Subject 15 characters 30 characters Mail address − 50 characters Main body 5,000 characters...
Page 188
Other Features ●Mail with file attachment Mail with melody file attachment You can send/receive i-mode mail attached with a melody file downloaded from a site or Internet website. (You cannot send a melody file prohibited from being used as a mail attachment or retrieved out of the FOMA terminal.) •...
Page 189
●i-motion mail You can send/receive mail with a movie file attachment recorded using an i-motion mail compatible terminal and with a movie downloaded from a site to/from i-motion mail compatible terminal, PC, and other company’s mobile phone. (You cannot send a movie file prohibited from being used as a mail attachment or retrieved out of the FOMA terminal.) •...
Page 190
• Receiving SMS (P.215) • Checking new SMS (P.215) • See DoCoMo’s website to send/receive SMS to/from an overseas telecommunications company other than DoCoMo. Number of Characters You Can Send/Receive The number of characters that can be sent/received by SMS is indicated in the table below.
Displaying the Mail Menu Press (Mail) in the stand-by display. Menu name Function Mail shortcut Inbox Display, reply to or forward received mail (P.202). Inbox Outbox Outbox Display, forward or edit sent mail (P.202). Draft Compose message Draft Display mail that was saved without being sent and sent Compose SMS...
Page 192
● If the number of saved draft mail has reached 50 or there is not enough free space left for draft mail, you cannot compose new mail nor edit draft mail. ● If new mail is sent when the number of saved sent mail has reached 500 or there is not enough free space, the unprotected sent mail is overwritten from the oldest.
Composing and Sending Deco-mail You can compose and send Deco-mail that is decorated, for example, by changing the size/color and background color of the text in the i-mode mail main body or inserting an image in the text. • Deco-mail may not be received or displayed correctly depending on the recipient’s terminal model. From the Mail menu, select [Compose message] and press The Edit mail display appears.
Page 194
Entering the Main Body After Specifying Decoration Press (Func) in the main body input display. The Function menu appears. Select [Decorate mail] → the decoration and press The Cross Deco-palette appears. When you select [Color/Size] to select the font size (“ ” large/“ ” medium/“ ” small) and Input text...
Select the decoration start point and press The first character to be decorated is set. Select the decoration end point and press The range of the text to be decorated is set and the Cross Deco-palette appears. Select the font size/color and press to select the font size (large/medium/small) and to select the font color.
File Attachment You can send i-mode mail with a still image, melody, and ToruCa card attachment. You can also send i-motion mail with a movie/i-motion attachment. ■Files that can be attached Size Maximum number Type Format Restrictions restriction of attached files ・...
Select a file type → a folder → a file and press The file is attached and “ ”, “ ”, “ ”, “ ”, or “ ” appears. Edit mail To check an image/movie/melody 20060314183006.jpg Move the cursor to a file and press (Play).
Receiving i-mode Mail When mail is sent to the i-mode center, the FOMA terminal automatically receives them. While receiving mail, “ ” flashes. Receiving mail When receiving is completed, “ ” is displayed, the indicator flashes, the Unread mail/message ring tone sounds, and the number of received mail is displayed. The display before receiving reappears after about 15 seconds.
When receiving mail, the notification icon “ ” (Mail at center) appears. To check mail ” → [Yes]. The Press (Link) in the stand-by display and select “ FOMA terminal is connected to the i-mode center. Mail at center Receiving i-mode Mail after Selecting Connect to the i-mode center and select mail to receive.
Replying to i-mode Mail You can compose and send replies to the received mail. • You may not be able to reply to some received mail. From the received mail list, select mail and press (Quote). The Edit mail display appears. The mail address as address, “Re: title of the received mail”...
Saving the Mail Address/Phone Number in the Phonebook Saving the Sender’s/Recipient’s Mail Address in the Phonebook You can save the mail address of a received mail sender and recipient or sent/saved mail recipient in the Phonebook. Example: Saving the mail address of a received mail sender to the FOMA terminal phonebook as a new entry From the received mail list, select mail, press , and press...
Select [Add to phonebook] and press The screen for selecting how to save to the Phonebook appears. Select [New] and press The screen for selecting where to save appears. When you select [Add] Select an entry to which you want to add the phone number from the Phonebook. Select [Main memory] and press The Edit phonebook display appears.
Page 203
Example: Saving a file attachment received in mail From the received mail list, select mail and press Select a file attachment and press (Func). The Function menu appears. To play back/save a movie/i-motion attachment Select a URL in the main body to obtain its movie/i-motion. Select [Save attached] →...
Displaying Received/Sent/Saved Mail You can display received/sent/saved mail any time you want to. Up to 200 to 1,000 received mails can be saved in [Inbox] and up to 50 to 500 sent mails can be saved in [Outbox]. Up to 10 to 50 mails that were saved without being sent or sent unsuccessfully, are saved in [Draft].
File attachment type With image attachment exceeding 10,000 bytes With melody attachment With image attachment With ToruCa card attachment With movie attachment (Sent/saved mail only) With i-αppli To To display mail addresses or phone numbers When saved in the Phonebook, the name is displayed instead of the mail address/phone number.
Page 206
Adding/Deleting Folders In addition to [Inbox]/[Outbox], you can create up to 20 folders each to manage received and sent mail. Besides these folders, additional five folders are reserved for i-αppli with mail each in [Inbox]/[Outbox]/[Draft]. You can also change a folder name or sort the folders. •...
Page 207
Moving Mail to a Different Folder You can move received/sent mail to another folder using three methods. Example: Moving received mail From the Mail menu, select [Inbox] → a folder and press To move all mail in a folder From the Function menu, select [Move] → [Move all] → [Yes] → a folder. To move several mails From the Function menu, select [Move] →...
Deleting Mail You can delete the received or sent mail using the following six methods. Delete one Delete a mail in the folder. Select&delete Delete several mails in a folder. Up to 30 mails can be selected at a time. Delete read msg (for received mail only) Delete all read mail.
Page 209
Select [Brows mail mode] and press The i-αppli mail can be displayed as regular mail. Checking the Number of Mail Saved The number of mail saved can be checked for each folder. Example: Checking the number of received mail saved From the Mail menu, select [Inbox] and press Select a folder and press (Func).
Select the sorting method at [Sort method]. [Mail address] : Specify a mail address. The mail address portion after the @ mark is required. However, when you set the mail address to “phone number@docomo.ne.jp”, enter the phone number only. [Group] : Specify a group.
Page 211
● If mail satisfies several sorting requirements, the sorting requirement with a lower number in the list has higher priority. If you set [None] for sorting requirement, the sorting requirements lower than the number you set become invalid, and mail is sorted to the folder for which [None] is set. ●...
Page 212
Setting the Type of Mail/Message to be Checked You can set whether to receive mail, Message R, and Message F when making inquiries to the i-mode center. Example: Setting the i-mode inquiry set for mail From the Mail menu, select [Mail setting] → [Common setting] → [i-mode inquiry set] and press i−mode inquiry set...
Page 213
Setting a Mail List By saving mail addresses in a mail list, you can send mail to all members in the list at the same time. Up to 10 mail lists can be saved. Up to five mail addresses can be saved in each mail list. From the Mail menu, select [Mail setting] →...
Page 214
Playing a Melody Automatically from Mail The melody can be set to be played back automatically when displaying mail or message. From the Mail menu, select [Mail setting] → [Common setting] → [Melody auto play] and press Select [Auto play]/[OFF] and press The Melody auto play is set.
Page 215
Enabling the Receiving of a File Attachment You can set whether or not to receive an image, melody, or ToruCa card attachment in i-mode mail. From the Mail menu, select [Mail setting] → [Attached file set] and press Select [Accept all]/[Accept slected]/[Reject all] at [Attached file]. [Accept all] : Accept receiving of all file attachments.
FOMA terminals. • You can exchange SMS with recipients/senders who subscribe to an overseas telecommunications company other than DoCoMo. See the NTT DoCoMo website for information about countries and overseas telecommunications companies you can use for sending/receiving SMS. • Even when the Notify caller ID is set to [Not notify], an SMS recipient is notified of the sender’s phone number.
Receiving SMS (Short Message Service) The FOMA terminal automatically receives SMS. You can save up to 1,000 received SMS including i-mode mail in [Inbox]. While receiving SMS, “ ” flashes. Receiving SMS When SMS reception is completed, “ ” is displayed, the incoming Unread mail/message...
International [SMSC] : Set when you receive SMS services provided by companies other than DoCoMo. [Type of Number] : When you select [Others] at [SMSC], select [International]/ [Unknown]. • When “ ” or “#” is included in the address entered at [Address], select [Unknown].
Page 219
i-αppli What is i-αppli? ........................218 Downloading i-αppli from a Site ..................219 Running i-αppli ....................<Run i-αppli> Running i-αppli Automatically ................<Auto start> Setting i-αppli for the Stand-by Display ............ <i-αppli stand-by> Managing i-αppli ......................... 225 Using Various i-αppli Functions ..................226...
What is i-αppli DX? What is i-αppli? i-αppli DX enables you to enjoy i-αppli more conveniently By downloading i-αppli from its site, the i-mode by working in conjunction with the i-mode terminal compatible FOMA terminal (hereinafter referred to as information (mail, Redial/Received record, Phonebook, i-mode terminal) can be made more useful in many ways.
Other Features Downloading i-αppli from a Site ● i-αppli stand-by display Up to 10 to 100 i-αppli software can be downloaded from i-αppli stand-by display enables you to set i-αppli for the a site and saved. stand-by display and to receive mail or place a call from •...
● Running i-αppli If you have deleted preinstalled software, you can download it from “SO@Planet”. [i Menu] → [メニューリスト] → [ケータイ電話メーカー] → [SO@Planet] i-αppli software can be set to run manually. ● The message “Terminal and UIM ID will be sent” may Press (i-mode) for over a second in the stand-by appear when downloading.
Page 223
Setting i-αppli Operating Conditions ● The sound from running i-αppli software is heard at the same volume level as set for the incoming call ring volume. It is heard at the volume level 3 when you set [STEP DOWN] • It may not be possible to change some items of the saved or [STEP UP] for the incoming call ring volume.
Page 224
※ Check and make sure you do not dial a wrong number. • When you use the “G-GUIDE TV program list remote control” • Please note that DoCoMo shall not be liable for the information for the first time, you need to perform initial settings and accept you set on the FOMA terminal.
● シムシティ3D for SO Running i-αppli Automatically Enabling/Disabling Auto Start You can set whether or not to start i-αppli software automatically on the FOMA terminal. This software is a 3D graphic city simulation game for From the Menu, select [i-appli] → [i αppli setting] → building a town where player takes on the role of mayor.
Enter the date/time/day of the week. Setting i-αppli for the Stand-by • Enter the date/time/day of the week according to the style Display of the auto start time selected in step 4. Press (Complete). Only one supporting software can be set for the i-αppli stand-by display.
Moving i-αppli to a Different Folder Managing i-αppli You can move software to a different folder using three • For some software, IP (information service providers) may methods. access the software saved in the mobile phone and directly Example: Moving a software stop the use of it.
While running the software, start the camera function. Checking Error History and Trace Result The Camera mode display appears. The error histories for the i-αppli stand-by display and Point the camera at the object and press the results output by the i-αppli trace feature can be The image is recorded.
Page 229
i-Channel What is i-Channel? ......................228 Displaying the i-Channel ..................... 229...
Page 230
There are two types of channels: “Basic channel” and What Is i-Channel? “Favorite channel”. “Basic channel” is provided by DoCoMo and is pre-registered, and therefore you can use The i-Channel service provided by DoCoMo or another it from the moment you start using the i-Channel service.
Page 231
Displaying the i-Channel When You Receive i-Channel When you receive information, the Press (i.ch) in the stand-by display. information is automatically run as Telop text on the stand-by display. To display the channel list Press (i.ch). → 最高14℃ 10 Telop ● When you receive i-Channel information, “ ”→“ ” flashes. The channel list appears.
Page 233
Mobile Wallet/ToruCa What is Mobile Wallet? ....................... 232 Starting a Mobile Wallet-compatible i-αppli ................ 233 What is ToruCa? ......................... 234 Obtaining a ToruCa Card ..................<ToruCa> Displaying a ToruCa(detail) Card ............. <Display ToruCa(detail)> Setting Whether to Obtain a ToruCa Card ..........<ToruCa receive>...
Please note ticket or point card. With features like Mobile Wallet, your that DoCoMo shall not be liable for any data loss/change mobile phone becomes an increasingly handy tool in real of the information saved on the IC card. The procedure for life.
Using the Mobile Wallet Starting a Mobile Wallet- compatible i-αppli When you hold up and show the FeliCa mark “ ” side of the FOMA terminal to a reader/writer (external device), You have access to useful functions, for example, reading/ you can use the FOMA terminal for payment as e-money writing data on the IC card using a Mobile Wallet- or use it in place of a train ticket.
Obtaining a ToruCa Card What is ToruCa? ToruCa is an e-card that can be obtained using Mobile You can hold up and show the FOMA terminal to a reader/ Wallet. This convenient e-card can be used for writer (external device) to obtain a ToruCa card. You can applications such as flier, restaurant card, or coupon.
Select a ToruCa card and press Managing ToruCa Cards Index Category icon Adding/Deleting Folders You can create and delete a folder for saving a ToruCa card. You can manage up to 21 folders. You can also change the name of a folder or sort folders in the list. •...
Protecting a ToruCa Card Searching a ToruCa Card You can protect a ToruCa card from being overwritten. You can search for ToruCa cards by category icons. You can set protection for up to 50 ToruCa cards (up to Press (Func) in the ToruCa folder list. 500K bytes).
Page 239
Displaying/Editing/ Managing Data ■Using Still Image Displaying the Saved Image ................<My picture> Editing Still Images ..................<Edit photo> ■Using Movie Playing Back Movie/i-motion ................<i-motion> Editing Movie ....................<Edit movie> ■Using Chara-den What is Chara-den? ..................<Chara-den> ■Using the Melody Playing Back a Melody ..................
Select an image and press Displaying the Saved Image You can display images saved in My picture of the Data box of the FOMA terminal or the “Memory Stick Duo”. Press ) in the stand-by display, select [My picture], and press Func...
Displaying Images as a Slideshow Adding a Frame JPEG images saved in My picture can be displayed by A frame can be added to an image of [sQCIF(128×96)], switching them automatically. [QCIF(176×144)], [Stby(320×240)], and [CIF(352× 288)]. Press (Func) in My picture file list. Example: Adding a frame and saving by overwriting The Function menu appears.
Adding Text Trimming Part of an Image After Zoom In Text can be added to an image of [sQCIF(128×96)], You can specify a part of an image after zooming in on it [QCIF(176×144)], [Stby(320×240)], and [CIF(352× and trim it into a size of [sQCIF(128×96)], [QCIF(176× 288)].
Select a folder and press Rotating an Image Camera 1/8 Management title Flowers and c An images of [sQCIF(128×96)], [QCIF(176×144)], [Stby(320×240)], [CIF(352×288)], and [VGA(640× One early aft 480)] can be rotated. Chummy two Example: Rotating an image and saving by overwriting It looks big From My picture file list, select an image, press The i-motion file list appears.
Select a movie/i-motion and press Editing Movie You can edit a movie recorded with the FOMA terminal. Clipping a Still Image from a Movie You can save a paused movie image as a still image. The selected movie/i-motion appears. From the i-motion file list, select a movie, press To turn off the icons and guide display of the display Press (Display).
Select [Attach to mail(S)]/[Attach to mail(L)] and press What is Chara-den? You can send an avatar of your choice instead of your own image when you use the videophone function. You can make this avatar move by pressing the keys on the keypad.
Displaying and Operating Chara-den Playing Back a Melody You can display Chara-den characters saved in the You can play back a melody saved in Melody of the Data Chara-den folder of the Data box. box of the FOMA terminal and in Melody of the “Memory Stick Duo”.
■ Removing the “Memory Stick Duo” “Memory Stick Duo” You can save Phonebook, mail, Bookmark, and other data in the FOMA terminal to the “Memory Stick Duo”, as well as copy data in the “Memory Stick Duo” to the FOMA terminal.
When you copy data of the FOMA terminal to the “Memory Stick Duo”, a corresponding folder is created automatically. “Memory Stick Duo” DCIM nnnMSDCF DSC0nnnn.JPG ....... DCF standard still image file (JPEG image) MOBILE DOCOMO NAMECARD CARDnnnn.VCF ....... Phonebook file MESSAGE OUTBOX SENDnnnn.VMG ...... Sent mail file SAVEBOX SAVEnnnn.VMG .......
Data That Can Be Written/Read to and from the “Memory Stick Duo” • It may take time to save data depending on the data size. • Data saved from the “Memory Stick Duo” may not be displayed/played back properly. Data you can/ Data you can/cannot cannot save from save from the...
Select data and press (Func). Copying/Moving Data from the FOMA The Function menu appears. Terminal to the “Memory Stick Duo” Select [Save to main] and press The Security code screen appears. You can copy/move the FOMA terminal phonebook, Text memo, Schedule, mail, Bookmark, ToruCa card, melody, Enter the Security code and press (OK).
Example: Copying data from the FOMA terminal phonebook to Managing the “Memory Stick the UIM phonebook Duo” From the FOMA terminal phonebook, select data and press (Func). The Function menu appears. Formatting the “Memory Stick Duo” To copy several data From the Function menu, select [Copy to UIM] →...
Example: Displaying the file list in the [Preinstall] folder in My Managing Data Box picture Press ) in the stand-by display. Data handled by the FOMA terminal, such as downloaded Data box data and data recorded using the camera, are saved in My picture...
Adding/Deleting Folders Deleting Data You can create or delete a folder for saving data. You You can delete data using three methods. can add up to 10 folders by category. You can also • You cannot delete preinstalled data other than Chara-den files. change the name of a folder.
Page 254
Displaying/Editing Data Information Setting How to Display a List of Images You can change the data management title and file name, You can select the display style of My picture and i-motion and set file restrictions. The management title is displayed file list using the following three methods.
Page 255
(DoCoMo shop, etc.) when the FOMA terminal is replaced due to a trouble or some other reason. • Please note that DoCoMo shall not be liable if your data cannot be transferred or if the data is lost or altered.
Select a folder → software and press Checking the Memory Space of ソフト一覧 1/12 ソフト一覧 1/12 the FOMA Terminal XXX game XXX game XXX quiz XXX quiz Aqua XXX friend Aqua XXX friend You can display the memory use status of the FOMA XXX Sanguozhi XXX Sanguozhi Used(Data) 64KB Used(Data) 64KB terminal. You can also check the volume used up by the Shortage 64KB...
Data That Can Be Sent/Received via Infrared Communications You can send and receive your Own number, Phonebook, Schedule, Text memo, Bookmark, mail, image, movie, melody, PDF data, and ToruCa card between mobile phones and other devices equipped with the infrared communications function.
Select [Yes] and press Receiving Data Using the The infrared communications is started. Data exchange is Infrared Communications started and the data is added to the existing data. To cancel receiving Press (Cancel). Receiving Data Sending Data Using the From the Menu, select [Tools] → [Rcv Ir Data] → Infrared Communications [Receive] and press “...
My document file list appears. Using the Infrared Remote Control • The title line shows the folder name and the figures at the right end of the title line show the order of the PDF data at the cursor/the total number of PDF data in the folder. Once infrared remote control software is downloaded from •...
Page 260
Searching a Character String of PDF Data ● The i-mode bookmarks/marks that you have added may be deleted if they are copied to a PC, etc. using infrared communications or the “Memory Stick Duo”. Press (Search) in the PDF data display. Search criteria...
Page 261
Other Useful Functions Multiaccess Feature ..................<Multiaccess> Multitask Feature ....................<Multitask> Starting the Alarm at a Specified Time ..............<Alarm> Saving Schedules ..................... <Schedule> Performing Frequently Used Functions Quickly ........... <My Selection> Recording Recipient’s or Your Own Voice ............ <Voice memo> Checking the Call Duration and Charge ..........
Placing a Voice Call during i-mode/Packet Multiaccess Feature Communications Multiaccess is a function that enables you to use a voice Example: Placing a voice call during i-mode call, packet communications, and SMS functions at the Press (MENU) during i-mode or packet commu- same time.
Activating a New Function Multitask Feature Press (MENU) during the activation of a function. Multitask is a function that enables you to perform several functions at the same time, each of which you can access by switching the displays. • For multitask combinations, see P.332. Using the Display During the Multitask Operation : One task is executed.
Select an alarm tone from Melody/i-motion of the Starting the Alarm at a Data box at [Alarm]. Specified Time • You can set a melody in the SMF/MFi format from Melody and an i-motion with sound track only or with video and sound tracks of an image size of [sQCIF(128×96)]/ The alarm is activated for about one minute at a specified [QCIF(176×144)] from i-motion.
Enter a starting time at [ ]. At the Alarm Time Enter a time in 24-hour format. The alarm tone sounds for about one minute with the To set the schedule period to all day indicator flashing. Select [ON] at [All day]. When it is set to [All day], you cannot set the starting time, ending date, ending time, and To stop the alarm tone Alarm...
Page 266
Set the volume at [Alarm volume]. ● If the schedule set for the 31st is set to the [Month] repeat type, the schedule is set for the last day of the month for Select from [OFF] and [1 to 5]. months with less than 31 days.
Page 267
Select the schedule and press Setting Holiday Schedule detail 2006/03/01 Wed You can set a day or a day of the week as a holiday and 12:00 cancel the holiday settings. A day set as a holiday is 2006/03/01 Wed 12:50 displayed in red. Sundays and holidays are set as default Lunch meeting...
Checking the Number of Schedules Recording Recipient’s or Your Saved Own Voice The number of schedules saved can be checked as well Your own voice during stand-by and the recipient’s voice as the number of schedules still available to be saved or during a voice call can be recorded.
Resetting the Total Call Duration and Checking the Call Duration Charge and Charge The display of the total call duration and charge can be You can check the call duration and charge for the last reset. The count starts from 0 after the reset. and total voice and videophone calls.
Enter the Security code and press (OK). Using the Calculator Call cost limit Set OFF The FOMA terminal has a calculator that can perform Limit 0YEN basic operations (addition, subtraction, multiplication, (10−100000) and division). Notification Alarm+Stand−by Example: Calculating 64×5 From the Menu, select [Tools] → [Calculator] and press Select [ON]/[OFF] for the Call limit notice at [Set].
From the Menu, select [Settings] → [Application] and Displaying a Memo press The contents of a saved memo can be checked. Application Mail From the Menu, select [Tools] → [Text memo] and i−mode ppli press Phonebook Call record Text memo list 1/5 PushTalk Camping is schedu Record msg...
Placing a Call Using i-mode Mail ● If a Phonebook memory number that is saved as Secret is set for the Memory number, set the Secret display to [ON] if you want to use the switch on the Earphone Mic to place You can easily place a voice or videophone call or a call.
Receiving a Call Automatically Deleting All Saved Data with Earphone You can delete saved data and restore the default settings of each function. For the functions to be reset by the You can set to automatically answer a voice or video- Delete all data, see the list of reset items (P.272) and the phone call when the Flat-Plug Switched Earphone Mic list of menus (P.314).
List of Reset Items The items in which settings, that are made through the associated Function menus, etc., are reset by executing the Reset settings or Delete all data are as follows. For functions that can be accessed through the menu display, see the list of menus (P.314).
Network Services This manual provides a brief description of each Network Service using the approach of operating from the menu of the FOMA terminal. For detailed information on operation of the Network Services, see the “Network Services Operation Guide”. Also, see the “Multi Number Operation Guide” for information on the Multi Number Service.
• For a service that requires a subscription, call the “General The Voice Mail Service is activated. Contact” on the backcover of this manual. • When DoCoMo adds and provides a new network service, you can save the new service in the menu (P.282). ●...
Page 277
Playing Back New Messages Sounding the Ring Tone When a Message Is Added If there are any messages held at the Voice Mail Service Center when placing or receiving a call, the notification You can set whether or not to alert you by sounding a icon “...
Receiving an Incoming Call During a Call The Call Waiting Service • When there is an incoming videophone call during a voice call, The beeps notify you of an incoming call that arrives you can end the voice call to receive the videophone call. during a call.
Stopping the Service From the Menu, select [NW Services] → [Call Forwarding] → [Deactivate] and press Select [Yes] and press The Call Forwarding Service is deactivated. * The paging service provided by NTT DoCoMo is called QUICKCAST as of January 2001.
Deleting the Saved Phone Number Saving the Phone Number of the Last Received Call From the Menu, select [NW Services] → [Bar Nuisance From the Menu, select [NW Services] → [Bar Nuisance Calls] → [Delete all entries] and press Calls] → [Register Caller] and press after you To delete the last saved entry From the Menu, select [NW Services] →...
● The English Guidance Service When the Denied no ID on the FOMA terminal and this service are set simultaneously, this service has priority. ● If you receive a “Reject” voice call when the Caller ID You can set English voice guidance to be played during Display Request Service is set to “Activate”, the ring tone incoming/outgoing calls and various network service does not sound.
“Activate”. • Depending on the UIM in use, the request numbers indicated by the DoCoMo representative of Contact for Repair and the Starting the In-call Arrival Act DoCoMo information desk of General Contact may be different or may not be displayed.
Enter a phone number at [ ]. Forwarding Service, etc. from a general push-button Enter a phone number within 26 digits. telephone, public phone, DoCoMo mobile phones, etc. Select a ring tone from Melody/i-motion of the Data Starting Remote Control box at [ ].
You can save up to 10 services in the menu when a new Move the cursor to an answering message and from the network service is added by DoCoMo. Function menu, select [Delete one] → [Yes]. To delete all answering messages, from the Function menu, select [Delete all], enter the Security code, and select [Yes].
Page 285
Data Communications About Data Communications ....................284 Preparations and Flow of Data Communications ............... 286 Connecting the FOMA Terminal to a PC ................286 Installing the Communication Configuration Files (Drivers) ..........287 Setting Communications Using the FOMA PC Setup Software .......... 289 Setting Communications Without the FOMA PC Setup Software ........
• The FOMA terminal does not support FAX communications. directly to the Internet service provider. For details about • If you are going to connect the FOMA terminal to DoCoMo’s usage fees, contact your Internet service provider. “sigmarionⅡ” or “musea” PDA to perform data communica- tions, you should update “sigmarionⅡ”/“musea”.
Page 287
■ Definition of terms Access Authentication for the Use of a Browser ● Administrator An administrator is authorized access to all Windows XP and When a FirstPass-compatible site that you access through Windows 2000 Professional systems. At least one user with the Internet browser on your PC requires the FirstPass (user Administrator privilege is set for each PC.
■ Operating environment of communication configuration Preparations and Flow of Data files (drivers)/FOMA PC setup software Communications Item Required environment PC main unit※1 PC/AT-compatible Windows 98, Windows Me, The preparations required for performing packet and 64K Windows 2000 Professional, data communications by connecting the FOMA terminal Windows XP (All Japanese versions) to a PC are given below.
Installing the Communication Configuration Files (Drivers) A user with Administrator privilege can install the software. Set “FOMA SO902i CD-ROM” in the CD-ROM drive To connect the FOMA terminal to a PC using the FOMA of the PC. USB connection cable (optional) and perform data...
Page 290
ジャ]. When using Windows 98 When using Windows Me or Windows 98 Click the [デバイスマネージャ] tab. Set “FOMA SO902i CD-ROM” in the CD-ROM drive Click each device and confirm the name of the installed of the PC. driver. Connect the FOMA terminal to the PC using the FOMA...
Example: When using Windows XP Set “FOMA SO902i CD-ROM” in the CD-ROM drive ● When you failed to install the software or [FOMA SO902i USB] does not appear on the window in step 2, reinstall of the PC. the software after uninstalling it by clicking [スタート] →...
Page 292
Select [NTT DoCoMo FOMA PC設定ソフト] and click [変更と削除]. When using Windows 2000 Professional To change the installation destination Select [NTT DoCoMo FOMA PC設定ソフト] and click [変 Click [参照], specify the desired installation destination, 更/削除]. and click [次へ]. When using Windows Me or Windows 98 Select [NTT DoCoMo FOMA PC設定ソフト] and click [追...
Page 293
Example: When using Windows XP Click [次へ]. Click [スタート] → [すべてのプログラム] → [FOMA You can connect with [ユーザー名] and [パスワード] left blank. • When using Windows XP or Windows 2000 Professional, PC設定ソフト]. you can select any user who can perform the operation. Put a checkmark for [最適化を行う] and click [次へ].
Page 294
To set [ユーザー名] and [パスワード], enter the various “<” “>” “|” and “””. information supplied by your service provider accurately, in • If [FOMA SO902i] is not set for [モデムの選択], select particular, uppercase and lowercase letters. [FOMA SO902i]. • When using Windows XP or Windows 2000 Professional, you can select any user who can perform the operation.
Page 295
Connect the FOMA terminal to a PC before starting this “?” “<” “>” “|” and “””. operation. [モデムの選択]: Example: When using Windows XP Select [FOMA SO902i]. Double-click the connection icon on the [電話番号]: Enter the line phone number of your provider. desktop.
Page 296
W-TCP Setting Host (APN) Setting The W-TCP setup software is a “TCP parameter setting” You can set a host (APN) for packet communications. tool for optimizing the transmission capacity of TCP/IP Connect the FOMA terminal to a PC before starting this when you perform packet communications using the operation.
Enter a dummy (nonexistent) phone number (such Setting Communications Without as “0”) at [電話番号], select [FOMA SO902i] at [接続 the FOMA PC Setup Software 方法], and click [OK]. The connection window appears. The procedure for setting packet or 64K data communi- cations without using the FOMA PC setup software is given below.
Page 298
Select [ダイヤルアップモデムを使用して接続する] Setting ON/OFF for the Notify Caller ID and click [次へ]. The caller ID is important personal information. Carefully Put a checkmark in the checkbox of [モデム- FOMA decide whether or not you want to notify a recipient of SO902i] and click [次へ].
Page 299
イル] menu → [プロパティ]. Check each item of the [全般] tab. • When multiple modems are connected to a PC, put a checkmark only for [モデム - FOMA SO902i] at [接続方法]. • Remove the checkmark from [ダイヤル情報を使う]. Click [OK]. The host and TCP/IP protocol are set.
Page 300
For packet communications • When multiple modems are connected to a PC, put a Enter “*99***<cid>#”. Enter the registration number checkmark only for [モデム - FOMA SO902i] at [接続方法]. of a host for <cid>. • Remove the checkmark from [ダイヤル情報を使う].
Page 301
Click [次へ] and go to step 3. Double-click the [新しい接続] icon. Enter a host name (any name) at [接続名] and click [次へ]. • If [モデムの選択] is not set to [FOMA SO902i], select [FOMA SO902i]. When using Windows 98 Click the [サーバーの種類] tab and check each item.
Performing the Dial-up Connection AT Commands Connect the FOMA terminal to a PC before starting this AT commands are the commands (instructions) for setting operation. and changing the functions of the FOMA terminal on a Example: When using Windows XP Click [スタート] →...
AT Command List AT commands that can be used for FOMA SO902i are listed below. [&F] : Commands that have their settings initialized by the AT&F command. [&W] : Commands that have their settings saved by the AT&W command. You can use the ATZ command to call back the setting value.
Page 304
Command Outline/Parameter Input example AT+CGDCONT=[<cid>[,“PPP”[,“<APN>”]]] Sets a host (APN) during outgoing packet transmission. AT+CGDCONT=2,“PPP”,“abc” AT+CGDCONT= ※1 cid=1-10 Used for managing hosts (APN) saved in the FOMA terminal for AT+CGDCONT=<cid> ※2 packet communications. AT+CGDCONT? APN=Arbitrary Host-specific arbitrary character string that indicates a host. AT+CGDCONT=? AT+CGEQMIN=[<cid.[,,<n>[,<m>]]] Saves the criteria for permitting or not permitting QoS (Quality of...
Page 305
Disconnects packet or 64K data communications. ATI<n> Displays an identification code. ATI0 Displays “NTT DoCoMo” (When the parameter is omitted). Displays the name of the FOMA terminal. Displays the version of the FOMA terminal. Switches from the online command mode to the online data mode during communications.
Page 306
Command Outline/Parameter Input example ATS2=<n> Sets an escape character. ATS2=0 ATS2? n=0-126 43: Default, 0: When the parameter is omitted. [&F] n=127 Disables the escape operation. ATS3=<n> Sets a carriage return (CR) character that can identify the end of an ATS3=13 AT command character string.
Page 307
Numeric value SIM wrong SIM (IC card equivalent Text indication Connection speed indication to UIM) other than a CONNECT 32000 32,000 bps DoCoMo product is in- CONNECT 64000 64,000 bps serted. CONNECT 384000 384,000 bps incorrect password Wrong password unknown Unknown error ●...
Page 308
■ Communications protocol result codes Numeric value Text indication Description indication PPPoverUD 64K data communications connection PACKET Packet communications connection ■ Example of result code indication ● When ATX0 is set When the connection is completed, only “CONNECT” is displayed regardless of the AT¥V command (P.303) setting. Text indication example Numeric value indication example ATD*99***3#...
Page 309
Entering Text About Entering Text ......................308 Entering Text ........................308 Entering Common Phrases ....................310 Entering Pictographs/Symbols ................... 310 Editing/Saving Common Phrases ............ <Edit common phrases> Quoting Data from the Phonebook, etc................310 Cutting/Copying/Pasting Text ....................311 Entering Text Using Kuten Codes ..............<Input kuten>...
■ Entering a character assigned to the same key twice About Entering Text or more in succession After entering the first character, move the cursor. The overview of the text entry is described here. ■ Deleting a character • Characters including JIS level 1 and level 2, 6,355 kanji are available.
Page 311
Press three times and press five times. Press Input text memo Input text memo けんと 検討 けんと 検討 健闘 剣道 検討 健闘 見当 拳闘 見当 県道 ケント 県と けんとう ケントウ 件と 券と 権と 健と ケントウ 謙と 憲と 建と 研と The characters “んと” are entered and the matching words The first conversion target word appears. list for “けんと” is displayed. To finalize this word To set the User conversion mode temporarily Press (Select).
Press (OK). Entering Common Phrases The selected pictographs are entered all at once. For common phrases, see P.324. Editing/Saving Common Phrases • Common phrases that are available vary depending on the contents to be edited. Unavailable categories are disabled for selection.
Pasting Text Cutting/Copying/Pasting Text Select the position to paste in the text input display The entered characters can be pasted to the other input display by cutting or copying. Use this function when and press (Func). you enter i-mode text or compose mail. The Function menu appears.
Example: Saving a word in the Prediction dictionary Using the Downloaded Dictionary From the Menu, select [Settings] → [Application] → [Input method] → [Edit prediction] and press Up to 20 dictionaries can be downloaded using i-mode for use with the FOMA terminal. When enabling a The Prediction dictionary display appears.
Page 315
Appendix/ External Device Interface/ Troubleshooting List of Menus ........................314 Characters Assigned to Keys ..................... 321 Special Symbols ......................... 322 Pictographs ......................... 322 Face Marks ......................... 323 Common Phrases ....................... 324 Preinstalled Images ......................325 Deco-mail Templates ......................326 Preinstalled Melodies ......................326 Kuten Codes ........................
Sort inbox Sort method/Sort to folder: ● P.208 None SMS setting Language P.216 SMS report Invalid Validity 3days SMSC DoCoMo Type of Number International Address 81903101652 ○ ○ Rcv opt setting P.210 ○ ○ Attached file Attached file Accept all P.213...
Page 317
○ P.170 Auto-display Prefer msgR ○ ○ P.173 SSL list CA certify Valid ○ ○ P.176 ○ ○ DoCoMo cert.1 Valid − DoCoMo cert.2 − User certificate P.176 Host selection ドコモ ○ ○※3 P.178 i αppli list i-appli − ●※4 P.220...
Page 318
Reset Delete Menu Default Setting Page settings all data − ●※5 Data box My picture P.238 − ●※5 i-motion P.241 Melody − ●※5 P.244 Chara-den − ●※5 P.244 My document − ●※5 P.257 標準 (壁紙) ○ ○ Settings Display Stand-by Stand-by display P.105 ○...
Page 319
Reset Delete Menu Default Setting Page settings all data ○ ○ Settings Call Missed call P.109 ○ ○ Videophone Display setting Main-Other side P.72 Set outgoing image Camera image: ON, ○ ○ P.72 Substitute image: ブンブン (Dimo) Visual preference Normal ○...
Page 320
Reset Delete Menu Default Setting Page settings all data Settings Lock/ Lock all P.117 Security ○ ○ IC card lock P.236 Remote lock ○ ○ P.117 Monitoring 3min ○ ○ Times 5Count ○ ○ − ○ List PIM lock P.119 ○...
Page 321
Reset Delete Menu Default Setting Page settings all data − NW Services Voice Mail Activate P.274, Set ring time Ring time 10sec Deactivate − Check setting − Play messages − − Voice Mail setting − Check messages ○ ○ Tone/Vibrate notice Delete VM icon −...
Special Symbols • Symbols marked with ■ may not be displayed correctly when sending to i-mode non-compatible mobile phones or PCs. ■Full-width symbols ■Half-width symbols Pictographs • Pictographs are not displayed correctly when sending to i-mode non-compatible mobile phones or PCs. •...
Face Marks When you enter the following words in the kanji/hiragana mode, Kao moji (face marks) are entered. ※ Face marks that belong to other than the “かお” category appear only when the Prediction conversion is used. Word Kao moji Word Kao moji Word...
Kuten Codes In the following Kuten code list, a 4-digit kuten code is expressed by the combination of the row for the first three digits and the column for the last digit. Example: When you wish to input “★” (corresponding to kuten code “0190”), locate it in the Kuten code list and determine the kuten code for it from its row (“019”) and column (“0”).
Multiaccess Combinations The table below indicates whether another event or task is available for each task in progress. • The FOMA terminal may not operate as indicated in the table below depending on its condition. Another event or task Voice V.phone i-mode 64K data...
Multitask Combinations The table below indicates whether another function is available for each function in the menu. • The FOMA terminal may not operate as indicated in the table below depending on the status of each function. • The functions marked with ■...
Phone number Collect Call (fees paid by the recipient of the call) (no area code) 106 Information on ordinary telephone numbers and DoCoMo mobile phones (no area code) 104 (paid) (Phone numbers of customers who declined to disclose their number information are not available.)
Some accessories are only available in some areas. For details, please contact our service counter (DoCoMo shop, etc.). For details on optional devices, see the user’s manual of each device.
Introduction of Data Link Software You can use “FOMA SO Series Data Link Software” to transfer data such as the Phonebook, mail, Bookmark, and Schedule data between the FOMA terminal and a PC. Use the FOMA USB connection cable (optional) to connect the FOMA terminal with a PC or use the “Memory Stick Duo”.
Change the file name extension to “.3gp”. From the “Memory Stick Duo”, select [MOBILE] → [DOCOMO] → [MOVIE] folder to save the file. • See P.246 for folder setup of the “Memory Stick Duo”. If the “Memory Stick Duo” does not contain a [MOVIE] folder, create this folder on a PC.
Troubleshooting First, check whether the software update is necessary for the FOMA terminal. If necessary, perform the software update (P.347). Trouble Cause and Remedy The FOMA terminal cannot be used. • Check if the battery pack is attached properly (P.35). •...
Page 340
Trouble Cause and Remedy An image other than that you set is displayed • If multiple images are set for the incoming image for voice/ for an incoming call. videophone call, the image is displayed in the following order of priority (P.88, 92, 99). 1.
Error Messages • In some cases, a 3-digit number may be displayed together with a message. This is a DoCoMo own code that DoCoMo displays on the FOMA terminal. Cannot execute because of memory Cannot support content shortage • Data that is not supported by the Another function is active.
Page 342
Connection failed (562) Data is wrong i-mode Center is busy. Please try again later (555) • Failed to connect to the i-mode • Failed to play back music or im- center. Move to a location with age data included in the QR code •...
Page 343
Invalid UIM, requested software Max entries already registered • The number of saved schedules failed to start has reached 300. Delete unnec- • The maximum number of data essary schedules (P.265). • Failed to start the i-αppli software entries of the Data box has been due to the function for restricting saved already.
Page 344
Root certificate has expired. Connect? • The PUK code is locked. Contact acters in the mail main body and the nearest DoCoMo shop (P.113). • The certificate of the FOMA ter- signature exceeds 5,000 full- minal is not yet valid or has ex- width or 10,000 half-width char- pired.
Page 345
• The i-αppli with mail software sup- Detail info display (P.252). • The UIM contains an error. Con- porting the mail folder is deleted. tact our service counter (DoCoMo Check the mail as you do it usu- shop, etc.). ally or download the supporting...
Page 346
Time out Unable to download data URL is too long to register • Failed to connect within the time • Failed to obtain the ToruCa(detail) • Failed to save the site as a book- set for the Connection timeout. card because of error occur- mark because the URL exceeds Change the setting or retry to con- rence.
• Malfunction due to use of devices and consumable parts other than those specified by DoCoMo will only be repaired at the owner’s expense, even if the warranty period is still effective.
Page 348
● Note that data you created or data you retrieved or downloaded from sources other than your mobile phone may be changed or lost when you change the model or have repairs done to the mobile phone. DoCoMo shall have no liability for any change or loss of any kind.
※ No packet communications charge is required for updating software. If the software update is necessary, we inform of it on DoCoMo’s home page and in “お知ら せ&ヘルプ” (Information & Help) accessible from i Menu. You can use one of the two update types: “Now update” or “Reserve” to update the software.
From the Menu, select [Settings] → [Management] → [SW Update] and press The Security code screen appears. Enter the Security code and press (OK). • The Security code is masked by “ ”. • The Security code is set to “0000” at the time of purchase. Confirm the messages.
Page 351
Updating the Software Immediately (Now update) From the screen for selecting the update type, select [Now update] and press then press (OK). SW Update Ready to Downloading download? Notice: Connecting No functions are available except receive calls After a while, the software download starts. • When downloading starts, step 2 and step 3 are performed automatically (no need to operate). To cancel the download Press (Cancel) while downloading.
Page 352
Reserving a Date/Time for the Software Update (Reserve) If downloading takes too long or the server is congested, you can connect to the server and preset a date/time to start the software update. Example: Reserving the software update on March 11 (Sat) 1:05 a.m. From the screen for selecting the update type, select [Reserve] and press The FOMA terminal connects to the server and displays a list of reservation List of choice...
Confirming the Reservation From the Menu, select [Settings] → [Management] → [SW Update] and press The Security code screen appears. Enter the Security code and press (OK). If the software update is already reserved, the reserved information appears. Already reserved for To change the reservation 2006/03/11 Sat...
When you update the pattern definitions, your mobile phone-specific information (such as model and manufacturer’s serial number) is automatically sent to the server (server for the scanning function under DoCoMo’s supervision). DoCoMo will not use the information sent from your mobile phone for any purposes other than the scanning function.
Page 355
● If the Auto-update setting is set to [Valid], “ ” (Update completed) appears in the stand-by display when the pattern definitions update is completed. If the pattern definitions were not updated successfully, “ ” (Update definitions) appears. Confirm the information by selecting the icon to clear the notification. ●...
SAR Certification Information This model phone FOMA SO902i meets the MIC’s* technical regulation for exposure to radio waves. The technical regulation established permitted levels of radio frequency energy, based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
Page 357
Index/Quick Manual Index ........................... 356 Quick Manual ........................364...
Page 358
Index Use ........161 Photo light ......137 Photometry ......140 AC adapter ......... 37 Pict. Effect ......140 Acpt/Rjct call ......123 Record a movie ....135 Additional service ..... 282 Cache ........157 Record still images ....132 Add answer wording ...
Page 363
PushTalk ........ 98 Services available on Videophone ......98 the FOMA terminal ....333 Receive a call ......54 Ring volume ....... 98 Set basic tone ......100 Incoming set ......98 Ringing time ....... 56 Set call record ....122, 269 On hold while receiving a call ...
Page 364
Insert ........308 Check messages ....275 Kuten codes ....311, 327 Display ......... 157 Check setting ...... 274 Multi/Single ......308 List ........160 Deactivate ......274 Paste ........311 User certificate ......176 Delete VM icon ....275 Pictograph/symbol mode ..
Page 366
Quick Manual The Quick Manual on the following pages provides convenient reference. Cut and fold these pages into a booklet and take it with you. ■Cutting the pages Cut the pages along the printed line ( ■Folding the cut pages Fold the pages you cut off along the printed line ( ) as shown in the illustrations below.
Page 371
Don’t forget your FOMA terminal or your manners! When you use the FOMA terminal, be careful not to disturb others around you. Set the Public mode in the following cases ●When you are driving Using the FOMA terminal while driving is dangerous because it may interfere safe driving. ※...
Page 372
※ For access from a PC, the “My DoCoMo ID/Password” are required. ※ If you have not yet obtained the “network security code” or “My DoCoMo ID/Password”, or ※ you forget them, call the “General Contact” below. Access to the services may not be available depending on the subscription detail.