Advertisement
<signature>
Sending mail with your signature
You can insert the signature registered in advance at the end of the mail sent or replied.
Refer to "Edit signature"
1
Press
(
) at the standby screen
ｍａｉｌ
and select [Create new]
2
Press
(
ｏｐｔｉｏｎ
3
Confirm [signature] is
selected and press
(
)
ｓｅｌｅｃｔ
Your signature is inserted
at the end of the text.
4
Create and send the mail
Refer to steps 2 through 8 in "OUT Mail."
s
P.269
<add address>
Sending mail to multiple addresses at one time
You can send mail to multiple addresses by adding several addresses. You can send to
up to five addresses at one time.
1
Press
(
) at the standby screen
ｍａｉｌ
and select [Create new]
2
Enter addresses
Refer to steps 2 and 3 in
s
"OUT Mail."
P.269
s
for registering your signature.
P.337
)
Ｅｄｉｔ Ｍａｉｌ
ｓａｖｅ
ｓｉｇｎａｔｕｒｅ
ａｔｔａｃｈ ｍｅｌｏｄｙ
ａｄｄ ａｄｄｒｅｓｓ
ｃａｎｃｅｌ ｅｄｉｔｉｎｇ
Ｅｄｉｔ ｍａｉｌ
☆☆☆☆☆☆☆☆
Ｂｒｉａｎ Ｓｍｉｔｈ
ｏｐｔｉｏｎ
ｓｅｌｅｃｔ
Ｅｄｉｔ ｍａｉｌ
ａｂｃ１２３∼７８９ｘｙｚ
Check
• If you use one-byte Katakana or E-MOJI
(pictograms) in your signature, they may not
properly appear on the receiving phone. Do not
use one-byte katakana or E-MOJI (pictograms)
unless the recipient has an i-mode mobile phone.
• If your signature is not registered in advance, a
warning sound is emitted and the message "No
signature is registered" appears.
• If the number of two-byte/one-byte characters of
the text with your signature inserted exceeds 250/
500, a warning sound is emitted and the message
"Text is too long to attach" appears.
Hint
• " (Line Feed)"
s
P.76
text and the signature. " (Line Feed)" is counted
as a two-byte character.
3
Press
(
ｏｐｔｉｏｎ
the Mail Edit screen
is inserted between the
) in
Ｅｄｉｔ ｍａｉｌ
ａｂｃ１２３∼７８９ｘｙｚ
ｓａｖｅ
ｓｉｇｎａｔｕｒｅ
ａｔｔａｃｈ ｍｅｌｏｄｙ
ａｄｄ ａｄｄｒｅｓｓ
ｃａｎｃｅｌ ｅｄｉｔｉｎｇ
295
Advertisement
