Advertisement
<Earphone>
Selecting a position at which the ringer tone is emitted between
[Earphone + Speaker] and [Earphone only]
You can set a position at which the ringer tone is emitted when you receive a call while
wearing the ear microphone with a switch (optional).
1
Select [Settings] / [Ringer] /
[Earphone] from the menu
2
Turn
to select a
position at which the
ringer tone is emitted
Earphone + speaker : The ringer tone is emitted
Earphone only
Ringer tone output when the Manner mode is ON
Manner mode
Earphone +
• Ringer tone only from
Speaker
earphone (Volume 1).
• The Digital Mova vibrates.
Earphone
• Ringer tone only from
earphone (Volume 1).
Only
• The Digital Mova vibrates.
s
P.65
Ｅａｒｐｈｏｎｅ
Ｅａｒｐｈｏｎｅ＋ｓｐｅａｋｅｒ
Ｅａｒｐｈｏｎｅ ｏｎｌｙ
ｃａｎｃｅｌ
ｓｅｌｅｃｔ
both form the ear
microphone with a switch
and speaker.
: The ringer tone is emitted
only form the ear
microphone with a switch.
• Ringer tone from both
earphone and speaker
("Step Down" tone).
• Ringer tone only from
earphone (Volume 5).
• Ringer tone from speaker as
well 20 seconds after ("Step
Down" tone).
Default
3
Press
(
ｓｅｌｅｃｔ
[Earphone] is set.
Check
• Even though [Earphone only] is set, the ringer
tone begins to be emitted both from the ear
microphone with a switch and speaker after
elapsing 20 seconds. When [Volume]
set to "StepDown" tone or "StepUp" tone, the
ringer tone is emitted from the ear microphone
with a switch at set volume and it is emitted both
from the ear microphone with a switch and
speaker in "StepDown" or "StepUp" tone after
elapsing 20 seconds.
Hint
• The setting of [Earphone] is shown on the menu
screen as follows.
•
Earphone + speaker : E+S
•
Earphone only
s
P.49
Bag mode
• Ringer tone only from
earphone (Volume 1).
• Ringer tone only from
earphone (Volume 1).
Earphone + Speaker
)
Ｒｉｎｇｅｒ ｓｅｔｔｉｎｇ
Ｖｏｌｕｍｅ
４
Ｔｙｐｅ
Ｏｒｉｇｉｎａｌ
Ｅａｒｐｈｏｎｅ Ｅ
Ｖｉｂｒａｔｉｏｎ
ＯＦＦ
Ｋｅｙ ｃｌｉｃｋ
１
▼
s
is
P.145
: E
Silent mode
201
Advertisement
