Advertisement
7
Designate a phone
number
When you designate a
phone number, the screen
returns to the "List" screen.
Fm add. book
: Select a phone number
Fm call record
: Select a phone number
Manually
: Enter a phone number.
8
Press
(
ｃｍｐｌｔ
The phone number is set.
9
Press
(
)
ｃｍｐｌｔ
Des. call by Number is set.
Check
• If you attempt to turn [ON] both [Number] of [Des.
Call]/[Des. call rej], then a warning tone is emitted
and the message "Designated calls are approved"
or "Designated calls are rejected" appears. Then
the message asking whether to "Set designated
number call rejection?" or "Set designated
number call?" appears. You can switch between
Designated Call Accept/Reject by pressing
(
).
ｓｅｌｅｃｔ
• If you press
(
ｃｍｐｌｔ
phone number, a warning sound is emitted and
the message "No number list is stored" appears.
Designate a phone number in the number list.
• When [Des. call] is turned [ON], a call without the
Caller Number ID is rejected.
• If you try to designate the same number as
already designated, a warning sound is emitted
and the message "The phone no. is already
selected" appears.
Ｌｉｓｔ
０９０８８０１２３４５
○×ｉｎｄｕｓｔｒｙ
０９０２５１１２３４５
０９０４９１１２２２２
Ｋｅｉｔｈ Ｇｒａｎｔ
▼
from the Address book.
s
P.103
s
from Call record.
P.40,42
s
P.86
)
Ｌｉｓｔ
０９０８８０１２３４５
○×ｉｎｄｕｓｔｒｙ
Ｃｏｍｐｌｅｔｅｄ
０９０２５１１２３４５
ｌｉｓｔ ｅｄｉｔｉｎｇ
０９０４９１１２２２２
Ｋｅｉｔｈ Ｇｒａｎｔ
▼
Ｄｅｓｉｇｎａｔｅｄ ｎｏ．
Ｓｅｔｔｉｎｇ
ＯＮ
Ｌｉｓｔ
Ｄｅｓｉｇｎａｔｅｄ
２／２０
ｎｕｍｂｅｒ ｃａｌｌ
ｉｓ ｓｅｔ
) without designating a
• When no phone number is registered in the
Address book or all phone numbers are registered
in the Secret mode while [Secret mode]
is turned [OFF], you cannot select a phone
number from the Address book.
• If you try to select a phone number from a [Fm.
call record] when no data is saved in the Incoming
record or Redial record, a warning sound is
emitted and the message "No data" appears.
• When [Incom. block] is turned [ON], the setting of
[Incom. block] has priority.
Hint
• When [Number] is turned [ON] and if you try to
perform step 8 after deleting all designated phone
numbers, the message "Set setting OFF" appears.
• If you select a phone number including "-", "-" is
omitted when the number is registered.
• If you select a phone number including "P", the
number after "P" is omitted.
• If you select a phone number including a "184",
"186" or "1310 - 1319" prefix, the prefix is omitted
when the phone number is registered.
• You can paste a copied phone number using
[paste no.] from the Number list edit screen
s
submenu
when designating the phone
P.59
s
number.
P.69
• When you want to change an already designated
phone number, select the number and perform
steps 7 and later.
• Refer to "delete/delete all"
the designated phone numbers.
• When you select a phone number from [Fm. call
record] or [Fm. add. book], the name appears on
the Number list screen.
s
P.184
s
for deleting
P.67
181
Advertisement
