Advertisement
Ringer Setting (continued)
Setting Group
You can designate each group registered
in the Address book and set it to [Group].
1
Select [Settings] /
[Ringer] / [Type] /
[Designated] /
[Group] from the
menu
2
Turn
group and press
(
ｓｅｌｅｃｔ
3
Turn
Ringer and press
(
ｓｅｌｅｃｔ
The selected ringer is set.
4
Press
The selected group is set.
Check
• If the phone number of the other party is not
registered in the Address book or when [OFF] is
selected in step 3, the normal ringer is emitted
even though [Group] is set.
148
Ｄｅｓｉｇｎａｔｅｄ ｇｐ．
Ｆａｍｉｌｙ
ｎｏｎｅ
Ｃｏｍｐａｎｙ
Ｔｙｐｅ１
Ｆｒｉｅｎｄ
s
P.65
ｎｏｎｅ
▼
ｏｐｔｉｏｎ
to select a
Ｒｉｎｇｅｒ
ｎｏｎｅ
Ｔｙｐｅ１
)
Ｔｙｐｅ２
Ｔｙｐｅ３
Ｔｙｐｅ４
Ｔｙｐｅ５
▼
to select a
Ｄｅｓ． ｇｒｏｕｐ
Ｆａｍｉｌｙ
Ｔｙｐｅ２
)
Ｃｏｍｐａｎｙ
Ｔｙｐｅ１
Ｆｒｉｅｎｄ
ｎｏｎｅ
▼
(
)
ｃｍｐｌｔ
Ｄｅｓ． ｇｒｏｕｐ
Ｆａｍｉｌｙ
Ｔｙｐｅ２
Ｄｅｓｉｇｎａｔｅｄ
Ｃｏｍｐａｎｙ
ｇｒｏｕｐ ｒｉｎｇｅｒ
Ｔｙｐｅ１
ｉｓ ｓｅｔ
Ｆｒｉｅｎｄ
ｎｏｎｅ
▼
Hint
• When you press
listen the selected ringer.
• On the "Des. ringer" screen, the number of the
currently registered group is shown.
• When the group icon
group number and the group icon alternate each
time
• If you receive an incoming call from a phone
number saved in the Address book in the secret
ｃｍｐｌｔ
ｓｅｌｅｃｔ
mode, then the ringer tone will not emit in the
designated ringer tone unless the Secret mode
P.184
if the Secret mode is [OFF] in such case.
• Select [reset all] from the submenu to reset all
settings back to [none].
(
) in step 2, you can
ｌｉｓｔｅｎ
s
is registered, the
P.60
is pressed.
s
is [ON]. The normal ringer tone will emit
Advertisement
