Advertisement
Hint
• When you want to change an already designated
group, select it and do step 2 and followed steps.
• When the group icons
the group number and the icon switch each time
you press
.
• Refer to "delete"
P.286
selected group.
• If the same number is set for the group
designation and address designation, then the
address designation ringer tone rings.
<Ringer vol.>
Ringer setting for incoming mail or message
You can set so that the ringer is emitted, when you receive mail or message.
1
Select [Settings] / [i-mode/mail] /
[Ringer vol.] from the menu
2
Turn
to select
[ON]/[OFF]
ON : The ringer is emitted when you receive
mail/messages.
OFF : The ringer is not emitted when you receive
mail/messages.
3
Press
(
ｓｅｌｅｃｔ
[Ringer vol.] is set.
s
are registered,
P.101
s
for deleting the
Ｒｉｎｇｅｒ ｖｏｌ．
ＯＮ
ＯＦＦ
ｃａｎｃｅｌ
ｓｅｌｅｃｔ
)
ｉ−ｍｏｄｅ／Ｍａｉｌ
Ｌｏｃｋ ｉ−ｍｏｄｅ ＯＦＦ
Ｒｉｎｇｅｒ ｄｕｒ．ｉ
Ｍａｉｌ ｒｉｎｇｅｒ
Ｒｉｎｇｅｒ ｖｏｌ． ＯＮ
ＳＳＬ ｌｉｓｔ
Check
• Though the mail ringer volume may be [ON], the
mail ringer tone will not ring if the ringer volume
s
is [OFF].
P.145
• When [Mode] is turned on
set [Ringer vol.].
• When [Ringer vol.] is turned [OFF], the ringer is
not emitted even if [Mail ringer]
turned on. But the incoming indicator flashes.
Default
ON
s
, you cannot
P.49
s
is
P.349
351
Advertisement
