Advertisement
<Reconnect>
Preventing disconnection of a call due to poor reception
A call may be disconnected when you are in a place with poor reception of radio waves,
such as in a tunnel, near a building, and so on. In this case, you can set the Digital Mova
so that the call is automatically reconnected.
1
Select [Settings] / [Service] /
[Reconnect] from the menu
2
Enter your PIN
P.72
3
Set each item
s
P.56
<Setting>
ON : Sets [Reconnect].
OFF : Cancels [Reconnect].
<Alarm>
High : Sets a high-pitched alert tone during
reconnection.
Low : Sets a low-pitched alert tone during
reconnection.
OFF : Sets no alert tone during reconnection.
4
Press
(
ｃｍｐｌｔ
[Reconnect] is set.
s
P.65
s
Ｒｅｃｏｎｎｅｃｔ
Ｓｅｔｔｉｎｇ
ＯＮ
Ａｌａｒｍ
Ｌｏｗ
ｃａｎｃｅｌ ｓｅｌｅｃｔ
ｃｍｐｌｔ
)
Ｒｅｃｏｎｎｅｃｔ
Ｓｅｔｔｉｎｇ
ＯＮ
Ａｌａｒｍ
Ｌｏｗ
Ｒｅｃｏｎｎｅｃｔ
ｉｓ ｓｅｔ
Default
Check
• While the call is disconnected, the other party does
not hear any tone.
• The duration for reconnection depends on the
usage and radio wave conditions. An estimation is
about 10 seconds.
• You or the caller may be charged for the duration
(max. 10 sec.) until reconnected.
Setting : OFF
Alarm : High
191
Advertisement
