Advertisement
Charging with the table holder connected to the AC adaptor
When using the table holder connected to the AC adaptor, you can charge without
opening the terminal cover.
You cannot charge the battery pack by itself.
5
2
1
Connect the connector of the AC adaptor to the terminal of the table holder with the
note facing upward.
2
Flip up the power plug of the AC adaptor and connect it to the AC100V power outlet.
3
Align the two recesses of the Digital Mova with the battery pack attached with the
protrusions of the table holder and insert until it clicks.
Charging starts and the Charge indicator lights up in red. When completed, the Charge
indicator goes off. When charging with the power turned on while the Digital Mova is open,
flashes during charging and
When you charge the Digital Mova during the [Sleep mode]
indicator/Sleep mode indicator lights up in red. At this time, the indicator flashes in green at
constant intervals. Be sure that is not malfunction of the battery pack.
4
When charging is completed, pick up the Digital Mova to remove it from the table holder.
5
Take up the power plug of the AC adaptor from the AC 100V power outlet.
*When you are not going to use the Digital Mova for a long time, be sure to disconnect the
power plug of the AC adaptor from the AC power outlet.
Hint
• You can charge while the Digital Mova is open.
• Put the attached strap outside so it is not caught between the Digital Mova and the table holder.
4
3
1
Connect with the
warning label
lights when completed on the screen.
Charge indicator
facing upward
s
, the Charge
P.164
29
Advertisement
