Controller Module Interfaces Of The Jbod Models - Infortrend EonStor GSa 3000 Series Hardware Manual

1.4.2

Controller module interfaces of the JBOD models

The controller module of a JBOD system contains a circuit board within a metal canister, integrated
with the hot-swap docking connectors at the backend. Two SAS wide ports on the interface faceplate
connect to a managing GSa system or other expansion systems.
Number
11
11
11
11
WARNING! You can only remove the controller when you already have the replacement. The GSa
11
controller is built of sensitive components. Unnecessary tampering may damage the controller.
EonStor GSa 3000 Series Hardware Manual
Part
Extraction levers/screw holes
SAS expansion port status LEDs
SAS expansion ports
Controller status LED
Mini USB service port
1-7