1-2.5 Drive Tray Led - Infortrend EonStor CS Maintenance Manual

1-2.5 Drive tray LED

There are two LEDs on the tray that indicate the status of drives.
Number

When you see the abnormal LED showing, please check if there is any failed drive event reported on EonOne.
Contact your reseller if you need to
Installation Guide
EonStor CS Installation Guide
LED Name Color/Status
Drive Busy
OFF
Power
Status
replace the drive
Drive Tray LED
Data is being written or read from the drive. The
drive is busy.
Data is being written or read from the drive. The
drive is extremely busy.
The hard drive is plugged in but there is no
activity going on.
The drive bay is occupied and working normally.
Disk drive failed or connection problem occurred.
.
Description
page 25 / 133