Coordinate Resection Measurement - Sokkia X-1000 series Operator's Manual

14.1 Coordinate Resection Measurement

N, E, Z of an instrument station is determined by the measurement.
PROCEDURE
1. Select "Resection" in <Menu>.
2. Select "NEZ" to display <Resection/Known pt.>.
3. Input the known point.
After setting the coordinates and target height for
the first known point press [NEXT] to move to the
second point.
• Press [PREV] to return to settings for the
previous point.
When all required known points have been set,
press [OK].
4. Sight the first known point and press [MEAS] to
begin measurement.
The measurement results are displayed on the
screen.
• Press [ANGLE] to measure the angle only.
77
14. RESECTION MEASUREMENT