Table of Contents
Advertisement
[S-LEV]
: Return signal
[TILT]
: Display tilt angle
[MOTOR]
: Display <Search/Track>
[INV]
: Rotates the instrument 180°
[SRCH]
: Automatically sights the center of the target
[RC]
: Rotate in the direction specified by the Remote Control System (Auto Tracking model
only)
[<-RC]
: Rotate in a counterclockwise direction (from the point of view of the Remote Controller)
(Auto Tracking model only)
[RC->]
: Rotate in a clockwise direction (from the point of view of the Remote Controller) (Auto
Tracking model only)
[RC Cont]
: Nullify the current measurement position and continue Turning operation (Auto
Tracking model only)
[TRK On]
: Start Auto Tracking (Auto Tracking model only. [TRK Off] during Auto Tracking)
[EDM]
: Distance measurement setting
[ATMOS]
: Atmosphere setting
[MENU]
: Display <Menu> (coordinate measurement, setting out measurement, offset
measurement, REM measurement, missing line measurement, resection, area
calculation)
[COORD]
: Coordinates measurement
[S-O]
: Setting-out measurement
[OFFSET]
: Offset measurement
[A-OFS]
: Angle offset menu
[D-OFS]
: Distance offset menu
[2D-OFS]
: Offset/2D menu
[MLM]
: Missing line measurement
[REM]
: REM measurement
[RESEC]
: Resection measurement
[AREA]
: Surface area measurement
[CNFG]
: Set setting out accuracy (can only be allocated to 2 and 3 above)
[H.TURN]
: Rotate the instrument to the entered horizontal angle. Rotate horizontally to the angle
for the setting out point when performing setting out (can only be allocated to 2 and 3
above).
[SHVR]
: Switch distance mode between slope distance (SD)/horizontal distance (HD)/height
difference (VD)/REM (R) in setting out screens. The capitalized letter in the Operating
icon indicates the currently selected mode (can only be allocated to 2 above).
[OK]
: Terminate setting out measurement for the selected setting out point and return to <Key
in coord>. This setting out point will be removed from the list (can only be allocated to
3 above).
PROCEDURE Allocating a Operating icon
1. Select "Customize" to display <Customize/Select
screen>.
126
19. CHANGING THE SETTINGS
Advertisement
Table of Contents
