Table of Contents
Advertisement
5.4
Starkey Mode
Via Starkey mode, you can jump from each Basic mode screen to the screen of checking/changing the various
settings directly. Press starkey {
same way with Status icon.
• 12 icons allocated in Starkey mode and the above 8 icons correspond with that Status icon
• Allocation of the icons can be changed.
Changing allocation of Starkey mode: "19.13 Changing Starkey Mode Icons"
Indicates the current status of the instrument.
Tapping icons will switch between the relevant options for that item. Tapping and holding will display a list of all
available options for that item and, in certain cases, a link to the configuration screen for that item.
Details of each icon are described below. (The numbers correspond to above icons).
(1) Battery icon
Remaining battery power indicator (Temperature = 20°C, EDM on).
The remaining battery power displayed when distance measurement is in progress may differ to that
displayed at other times.
You can jump to the Power config. screen.
"19.6 Instrument Conditions - Power"
When using standard battery (BDC70)
: Level 3
Full power
: Level 2
Plenty of power remains.
: Level 1
Half or less power remains.
: Level 0
Little power remains. Prepare a replacement battery. (Flashes red and black)
: No power Stop operation and charge the battery. (Red display in the center of the screen)
When using external battery (BDC60A/61A)
: Level 3
Full power
: Level 2
Plenty of power remains.
: Level 1
Half or less power remains.
: Level 0
Little power remains. Prepare a replacement battery.
} to enter Starkey mode. Each icon can be tapped or pressed and hold in the
★
"6.1 Battery Charging"
"6.1 Battery Charging"
(1) (2) (3) (4)
(5) (6) (7) (8)
(9)(10)
(11)
(12) (13)
12 and 13 are not allocated
when instrument was shipped.
23
5. BASIC OPERATION
Advertisement
Table of Contents
