Coordinate Measurement; Entering Instrument Station Data - Sokkia X-1000 series Operator's Manual

13.COORDINATE MEASUREMENT

By performing coordinate measurements it is possible to find the 3-dimensional coordinates of the target based
on station point coordinates, instrument height, target height, and azimuth angles of the backsight station which
are entered in advance.
• It is possible to allocate Operating icons in measurement menus to suit various applications and the ways that
different operators handle the instrument.

"19.12 Allocating Operating Icons"

13.1 Entering Instrument Station Data

Before performing coordinate measurement, enter instrument station coordinates and instrument height.

• "Occupy" on the software represents instrument station.
PROCEDURE
1. First measure the instrument height with a tape
measure, etc.
2. Select "Coord." in <Menu>.
3. Select "Occupy setup".
71