Table of Contents
Advertisement
Circular level for the main unit (L08C) (optional
accessory)
L08C is the circular level to install to the rotating portion of
the instrument. The Installed level is easy to check its
bubble's state, that makes it possible to perform the
levelling more quickly.
Tubular compass (CP7) (optional accessory)
Slide the tubular compass into the tubular compass slot,
loosen the clamp screw, then rotate the top part of the
instrument until the compass needle bisects the index
lines. The telescope's face 1 sighting direction in this
position will indicate magnetic north. After use, tighten the
clamp and remove the compass from the slot.
The figure on the right is the standard handle. Mounting
method is the same for the RC handle.
• The tubular compass is susceptible to the influence of
nearby magnets or metal. Such influence could cause it
to fail to accurately indicate magnetic north. Do not use
magnetic north as indicated by this compass for base line
surveying.
Telescope eyepiece lens (EL8) (optional accessory)
Magnification
: 40X
Field of view
: 1° 7'30"
Diagonal eyepiece (DE30) (optional accessory)
The diagonal eyepiece is convenient for observations near
the nadir and in narrow spaces.
Solar filter (OF4) (optional accessory)
When sighting targets where glare is present, solar
observations for example, attach it to the objective lens of
the instrument to protect its interior and the eyes of its
operator.
156
25. ACCESSORIES
Tubular
compass slot
Advertisement
Table of Contents
