Observation Conditions - Reflector (Target) - Sokkia X-1000 series Operator's Manual

19.3 Observation Conditions - Reflector (Target)

Select "Obs.condition" in <Configuration> and select "Reflector".
Factory setting
Factory settings are indicated in the above <Reflector>.
• "Prism+" indicates a target used with an external device or in a program installed in the Program mode.

prism constant correction value
Reflective prisms each have their prism constant.
Set the prism constant correction value of the reflective prism you are using. When selecting "N-Prism" in
"Reflector", prism constant correction value is set to "0" automatically.
112
19. CHANGING THE SETTINGS