Changing The Settings; Observation Conditions - Angle/Tilt - Sokkia X-1000 series Operator's Manual

19.CHANGING THE SETTINGS

This section explains the contents of parameter settings in Config mode and how to change these settings.
Each item can be changed to meet your measurement requirements.
<Configuration> can be accessed by tapping Config mode icon in Starkey mode.
The following items in Configuration mode are explained in other chapters.
Observation condition - Search/Track settings
Communication settings
Instrument configurations

19.1 Observation Conditions - Angle/Tilt

Select "Obs.condition" in <Configuration> and select "Angle/Tilt".
Items set and options (*: Factory setting)
Tilt crn (tilt correction) 
Tilt error
Coll.crn. (collimation correction) 
V.obs (vertical angle display method)  : Zenith*/Horiz/Horiz ±90

"10.1 Auto Pointing and Auto Tracking Settings"

"9. CONNECTING TO EXTERNAL DEVICES"

"21.2 Tilt Sensor", "21.4 Collimation",
"21.5 Image Sensor Reticle"
: Yes (H,V)*/No/Yes (V)
: No action*/Go to <Tilt> (electric circular level is displayed)
: No/Yes*
108