Sokkia X-1000 series Operator's Manual page 79

2. Select "Coord." in <Coordinate>.
Press [MEAS] to start measurement. Press
[STOP] to stop the measurement. The coordinates
of the target point are displayed.
• Tap the screen title to display popup and select
"Graphic" display. The coordinates are displayed
on a graph.
• Press [HT] to set the instrument station data
again. When the target height of the next point is
different, input it before the observation.
3. Sight the next target and press [MEAS] to begin
measurement. Continue until all targets have
been measured.
4. When coordinate measurement is completed,
press {ESC} to return to <Coord. measurement>.
13. COORDINATE MEASUREMENT
75