Table of Contents
Advertisement
19.9 Instrument Conditions - Password
When a password has been set, the password screen will appear when the instrument is powered ON.
Setting a password allows you to protect important information such as measurement data.
No password was set when the instrument was shipped. When setting a password for the first time, leave the
"Old password" box blank.
Select "Inst. Config" in <Configuration> and select "Password".
Items set
Old password
New password
New password again
• Password can be from 3 up to 16 characters in length. Input characters will be displayed as asterisks.
• To deactivate the password function, perform the new password setting procedure but enter a "space" in the
"New password" box.
• The password function will not be canceled when a cold boot is performed.
• The password must be input after powering ON the instrument from an external device when a password has
been set.
: Input current password
: Input the new password
: Input the new password again
121
19. CHANGING THE SETTINGS
Advertisement
Table of Contents
