5. BASIC OPERATION
Learn basic key operations here before you read each measurement procedure.
5.1
Basic Key Operation
Power ON/OFF
"8. POWER ON/OFF"
Lighting up the reticle/keys and selecting screen backlight brightness
{
}
Brightness level: "19.7 Instrument Conditions - Instrument"
Switching to Starkey mode
{
}
★
"5.4 Starkey Mode"
Switching to Program mode
{PRG}
• Do not switch between modes by {PRG} or not turn OFF the power just after pressing {PRG} (when a
program is activated or quit).
Switching the Laser-pointer/Guide light ON/OFF
{
} (Press and hold until a
beep sounds
)
"Switching {
} function: 19.7 Instrument Conditions - Instrument"
• Changes can also be made by tapping the icon on Status icon or in Starkey mode.
"5.2 Display Functions Status icons", "5.4 Starkey Mode"
{ESC}
{
Display unit
{
}
Switching input mode
Switches the reticle illumination and key light On/Off (When Key light is
On, backlight brigthtness goes down)
Switches to Starkey mode/previous screen
Switches to Program mode/Basic mode
Turn ON/OFF the laser-pointer/guide light
16
{
}
PRG
Program mode
}
{
}
B.S.
{
}
{
}
{
Enter
Luminance sensor
Starkey mode
Illumination
to
}