Sokkia X-1000 series Operator's Manual page 133

2. Select "Starkey mode".
3. Select a Starkey mode icon you wish to re-
allocate.
Tap the icon to display the Starkey mode icon list.
4. Select the new icon from the Starkey mode icon
list.
The icon is allocated in the selected icon position.
5. Repeat steps 3 to 4 to perform further icon
allocations.
6. Press {ESC} to finish allocating icons. The
allocated icons are stored in memory and the
previous screen is restored. The newly allocated
icons appear in the relevant measurement screen.
129
19. CHANGING THE SETTINGS