Sokkia X-1000 series Operator's Manual page 105

The measurement results are displayed. Press
[YES] to confirm.
6. Sight the 2nd target and press [MEAS] to start
measurement.
Press [STOP] to stop the measurement. The
measurement results are displayed.
7. Press [YES] in the measurement result screen of
the 2nd target to display results for the target
point.
Press [HVD/nez] to switch results for the target
point between distance/angle values and
coordinate/elevation values.
8. Press [OK] in the screen in step 7 to return to
<Offset>.
101
16. OFFSET MEASUREMENT