Accessories - Sokkia X-1000 series Operator's Manual

25.ACCESSORIES

The following are outlines and how to use standard accessories (not all) and optional accessories.
The following items are explained in other chapters.

Power supply and target optional accessories: "23. POWER SUPPLY SYSTEM", "24. TARGET
SYSTEM".
Carrying case and shoulder belt (standard equipment)

Attach the shoulder belt to the carrying case to shoulder
the carrying case.
Be sure to face the surface with instrument name label to
your back when shouldering the carrying case. The side
with one clasp is the upper surface.
Attach the belt hooks to the clasps on the carrying case
shown in the figure on the right.

Warning
• Do not attach the belt hooks to the carrying case in the
wrong direction. The case or instrument could be
dropped and cause injury.
Plumb bob (optional accessory)

The plumb bob can be used to set up and center the
instrument on days when there is little wind. To use the
plumb bob, unwind its cord, pass it through the cord grip
piece as shown in the figure to adjust its length, then
suspend it from the hook attached to the centering screw.
Clasp for belt hook
Shoulder belt
Use the outside clasps
155
Instrument
name label
Face to your back
Wrong sample