Sokkia X-1000 series Operator's Manual page 98

5. Press [H.TURN] to automatically rotate the
instrument until the angle of the setting out point
reads 0 .
°
6. Sight the target and press [MEAS]. Measurement
begins and the measurement results are
displayed.
7. Switch the Operating icons and press [REM] to
start REM measurement.
The distance (height difference) and direction to
move the target until the sighting point and setting
out point are located is displayed on the
instrument.
Press [STOP] to stop measuring.
Find the setting-out point by moving the telescope
until "SO.Height Diff" reads 0 m.
• Movement indicator (Red indicates that target
position is correct)
: Move the telescope near the zenith

: Move the telescope near the nadir

 : Telescope direction is correct

For details of other movement indicators:
"15.2 Distance Setting-out Measurement"
step 6
15. SETTING-OUT MEASUREMENT
Arrows indicate direction to move
94